Facile synthesis of polypyrrole nanospheres and their carbonized products for potential application in high-performance supercapacitors

Nitrogen-Containing Carbon Tubes Fabricated by Light Irradiation

Cotton-core/polypyrrole (PPy)-sheath fibers (cotton/PPy fibers) were synthesized by aqueous chemical oxidative seeded polymerization and were utilized as precursors for nitrogen-containing carbon (NCC) tubes. Irradiation of the cotton/PPy fibers with a near-infrared (NIR) laser heated them to approximately 300 °C due to light-to-heat photothermal conversion by the PPy, and the cotton core was thermally decomposed and vaporized. Scanning electron microscopy studies revealed the formation of tubes with monodispersed diameters, and elemental microanalysis, Fourier transform infrared spectroscopy, and Raman spectroscopy confirmed that the PPy sheath was converted into NCC. Furthermore, sunlight also worked as the light source in fabricating the NCC tubes. The thicknesses of the tubes were controlled between 410 nm and 2.30 μm by tuning the PPy sheath thickness. The method developed in this study can be extended to other polymeric fibers, including acrylic and wool fibers. The shapes of the cross sections and surface nanomorphologies of the NCC tubes can be reflected in those of the polymer/PPy fibers.

Polypyrrole Nanomaterials: Structure, Preparation and Application

In the past decade, nanostructured polypyrrole (PPy) has been widely studied because of its many specific properties, which have obvious advantages over bulk-structured PPy. This review outlines the main structures, preparation methods, physicochemical properties, potential applications, and future prospects of PPy nanomaterials. The preparation approaches include the soft micellar template method, hard physical template method and templateless method. Due to their excellent electrical conductivity, biocompatibility, environmental stability and reversible redox properties, PPy nanomaterials have potential applications in the fields of energy storage, biomedicine, sensors, adsorption and impurity removal, electromagnetic shielding, and corrosion resistant. Finally, the current difficulties and future opportunities in this research area are discussed.

Electrospinning-Based Carbon Nanofibers for Energy and Sensor Applications

Carbon nanofibers (CNFs) are the most basic structure of one-dimensional nanometer-scale sp2 carbon. The CNF’s structure provides fast current transfer and a large surface area and it is widely used as an energy storage material and as a sensor electrode material. Electrospinning is a well-known technology that enables the production of a large number of uniform nanofibers and it is the easiest way to mass-produce CNFs of a specific diameter. In this review article, we introduce an electrospinning method capable of manufacturing CNFs using a polymer precursor, thereafter, we present the technologies for manufacturing CNFs that have a porous and hollow structure by modifying existing electrospinning technology. This paper also discusses research on the applications of CNFs with various structures that have recently been developed for sensor electrode materials and energy storage materials.

Microstructure Evolution and Its Correlation with Performance in Nitrogen-Containing Porous Carbon Prepared by Polypyrrole Carbonization: Insights from Hybrid Calculations

The preparation of nitrogen-containing porous carbon (NCPC) materials by controlled carbonization is an exciting topic due to their high surface area and good conductivity for use in the fields of electrochemical energy storage and conversion. However, the poor controllability of amorphous porous carbon prepared by carbonization has always been a tough problem due to the unclear carbonation mechanism, which thus makes it hard to reveal the microstructure–performance relationship. To address this, here, we comprehensively employed reactive molecular dynamics (ReaxFF-MD) simulations and first-principles calculations, together with machine learning technologies, to clarify the carbonation process of polypyrrole, including the deprotonation and formation of pore structures with temperature, as well as the relationship between microstructure, conductance, and pore size. This work constructed ring expressions for PPy thermal conversion at the atomic level. It revealed the structural factors that determine the conductivity and pore size of carbonized products. More significantly, physically interpretable machine learning models were determined to quantitatively express structure factors and performance structure–activity relationships. Our study also confirmed that deprotonation preferentially occurred by desorbing the dihydrogen atom on nitrogen atoms during the carbonization of PPy. This theoretical work clearly reproduces the microstructure evolution of polypyrrole on an atomic scale that is hard to do via experimentation, thus paving a new way to the design and development of nitrogen-containing porous carbon materials with controllable morphology and performance.

Monodispersed Nitrogen-Containing Carbon Capsules Fabricated from Conjugated Polymer-Coated Particles via Light Irradiation

Near-infrared (NIR) light irradiation induced the transformation of polypyrrole (PPy) to nitrogen-containing carbon (NCC) material due to its light-to-heat photothermal property. The temperature of the PPy increased over 700 °C within a few seconds by the NIR laser irradiation, and elemental microanalysis confirmed the decreases of hydrogen and chloride contents and increases of carbon and nitrogen contents. Monodispersed polystyrene (PS)-core/PPy shell particles (PS/PPy particles) synthesized by aqueous chemical oxidative seeded polymerization were utilized as a precursor toward monodispersed NCC capsules. When the NIR laser was irradiated to the PS/PPy particles, the temperature rose to approximately 300 °C and smoke was generated, indicating that the PS component forming the core was thermally decomposed and vaporized. Scanning electron microscopy studies revealed the successful formation of spherical and highly monodispersed capsules, and Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy studies confirmed the capsules consisted of NCC materials. Furthermore, sunlight was also demonstrated to work as a light source to fabricate NCC capsules. The size and thickness of the capsules can be controlled between 1 and 80 μm and 146 and 231 nm, respectively, by tuning the size of the original PS/PPy particles and PPy shell thickness.

Comparative Study of the Adsorption of Acid Blue 40 on Polyaniline, Magnetic Oxide and Their Composites: Synthesis, Characterization and Application

Conducting polymers (CPs), especially polyaniline (PANI) based hybrid materials have emerged as very interesting materials for the adsorption of heavy metals and dyes from an aqueous environment due to their electrical transport properties, fascinating doping/de-doping chemistry and porous surface texture. Acid Blue 40 (AB40) is one of the common dyes present in the industrial effluents. We have performed a comparative study on the removal of AB40 from water through the application of PANI, magnetic oxide (Fe₃O₄) and their composites. Prior to this study, PANI and its composites with magnetic oxide were synthesized through our previously reported chemical oxidative synthesis route. The adsorption of AB40 on the synthesized materials was investigated with UV-Vis spectroscopy and resulting data were analyzed by fitting into Tempkin, Freundlich, Dubinin-Radushkevich (D-R) and Langmuir isotherm models. The Freundlich isotherm model fits more closely to the adsorptions data with R² values of 0.933, 0.971 and 0.941 for Fe₃O₄, PANI and composites, respectively. The maximum adsorption capacity of Fe₃O₄, PANI and composites was, respectively, 130.5, 264.9 and 216.9 mg g^-1. Comparatively good adsorption capability of PANI in the present case is attributed to electrostatic interactions and a greater number of H-bonding. Effect of pH of solution, temperature, initial concentration of AB40, contact time, ionic strength and dose of adsorbent were also investigated. Adsorption followed pseudo-second-order kinetics. The activation energy of adsorption of AB40 on Fe₃O₄, PANI and composites were 30.12, 22.09 and 26.13 kJmol^-1 respectively. Enthalpy change, entropy change and Gibbs free energy changes are -6.077, -0.026 and -11.93 kJ mol^-1 for adsorption of AB40 on Fe₃O₄. These values are -8.993, -0.032 and -19.87 kJ mol^-1 for PANI and -10.62, -0.054 and -19.75 kJ mol^-1 for adsorption of AB40 on PANI/Fe₃O₄ composites. The negative sign of entropy, enthalpy and Gibbs free energy changes indicate spontaneous and exothermic nature of adsorption.

Continuous microfluidic fabrication of polypyrrole nanoparticles

Polypyrrole (PPy) nanoparticles were synthesized successfully by oxidation polymerization in droplets by microfluidic system. The oxidizing agent ammonium persulfate was added at various molar ratios with respect to the monomer. The details of the procedure, droplet formation inside the channel and the effects of various factors are described. The method is a fast and continuous way for the synthesis of PPy. Products were characterized using Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermal gravimetric analysis, cyclic voltammetry, electrochemical impedance spectroscopy and photoluminescence spectroscopy.

Fabrication of double-shell hollow NiO@N-C nanotubes for a high-performance supercapacitor

Rational fabrication of carbon-based materials hybridized with transition-metal oxides is crucial for the design of supercapacitor electrodes with superior properties.

Ultra-stretchable and highly sensitive strain sensor based on gradient structure carbon nanotubes

High stretchability and sensitivity of strain sensors are two properties that are very difficult to combine together into one material, due to the intrinsic dilemma of the opposite requirements of robustness of the conductive network. Therefore, the improvement of one property is always achieved at the expense of decreasing the other property, and preventing its practical application. Inspired by the micro-structure of the copolymer, which consists of stretchable amorphous and strong crystal domains, we developed a highly stretchable and sensitive strain sensor, based on innovative gradient carbon nanotubes (CNTs). By integrating randomly oriented and well aligned CNTs, acting as sensitive and stretchable conductive elements, respectively, into a continuous changing structure, our strain sensors successfully combine both a high sensitivity (gauge factor (GF) = 13.5) and ultra-stretchability (>550%). With a fast response speed (<33 ms) and recovery speed (<60 ms), lossless detection of a 8 Hz mechanical signal has been easily realized. In addition, the gradient CNTs strain sensors also showed great durability in a dynamic test of 12 000 cycles, as well as extraordinary linearity and ultra-low working voltage (10 mV). These outstanding features mean our sensors have enormous potential for applications in health monitoring, sports performance monitoring and soft robotics.

A high-performance asymmetric supercapacitor based on vanadyl phosphate/carbon nanocomposites and polypyrrole-derived carbon nanowires

A novel asymmetric supercapacitor device in an aqueous electrolyte is fabricated using a vanadyl phosphate/carbon nanocomposite as the positive electrode and a polypyrrole-derived carbon nanowire as the negative electrode. The vanadyl phosphate/carbon nanocomposites are synthesized by a simple two-step approach in which layered VOPO₄·2H₂O is first intercalated by dodecylamine and then annealed at high temperature, leading to the in situ carbonization of the intercalated dodecylamine. It is found that the sample in which the incorporated carbon with a high degree of graphitization exhibits a high specific capacitance of 469 F g^-1 at a current density of 1 A g^-1 and excellent rate performance (retained 77% capacitance at 10 A g^-1). A polypyrrole-derived carbon nanowire is synthesized by the direct carbonization of nanowire-shaped polypyrrole, revealing a rough surface of nanowire-like frameworks and good electrochemical behavior. Taking advantage of both positive and negative materials, the assembled asymmetric supercapacitor device exhibits a high energy density of 30.6 W h kg^-1 at a high power density of 813 W kg^-1 in a wide voltage region of 0-1.6 V, as well as a good electrochemical stability (84.3% capacitance retention after 5000 cycles). The present work can shed light on the fabrication of novel asymmetric supercapacitors with high-performance.

Synthesis and photoluminescence modulating of polypyrrole fluorescent nano-spheres/dots

Polypyrrole fluorescent nanospheres/dots with tunable band gaps have been successfully synthesized, which showed the outstanding characteristics of low cytotoxicity, good biocompatibility and high luminescence stability.

Evaluation of the fracture behaviors of fluoropolymer binders with the essential work of fracture (EWF)

The beforehand evaluation of the fracture toughness and behaviors of the polymer binder through EWF can give a reliable feedback to the final fracture toughness of PBX.

Hierarchical structure of hollow thorn-like polypyrrole microtubes with enhanced electrochemical performance

The hydrophilic sulfonate groups of SDBS were negatively charged, and were absorbed by the cationic pyrrole radicals produced during polymerization to PPy. The electrostatic absorption between the oppositely charged ions induced so-called thorns.

Radiolytic method as a novel approach for the synthesis of nanostructured conducting polypyrrole

In this study, a novel and extremely facile method for the synthesis of conducting polypyrrole (PPy) was achieved in aqueous solution. This radiolytic method is totally free of template and environmentally friendly compared with traditional chemical methods. According to ultraviolet-visible (UV-vis) spectroscopy and Fourier transform infrared (FTIR) spectroscopy analysis, pyrrole (Py) monomers were polymerized into PPy thanks to their oxidation by HO(•) radicals produced by the radiolysis of water when exposed to γ irradiation. The morphology of PPy was characterized by cryo-transmission electron microscopy (cryo-TEM) in aqueous solution and by scanning electron microscopy (SEM) after deposition. In an original way, high-resolution atomic force microscopy, coupled with infrared nanospectroscopy, was used to probe the local chemical composition of PPy nanostructures. The results demonstrated that spherical and chaplet-like PPy nanostructures were formed by γ-radiolysis. Thermogravimetric analysis (TGA) and electronic conductivity measurements showed that radiosynthesized PPy had good thermal stability and an electrical conductivity higher than that of chemically synthesized PPy.

Effect of surface chemistry on the double layer capacitance of polypyrrole-derived ordered mesoporous carbon

In this work, the effect of nitrogen on the double layer (DL) capacitance of nitrogen-doped ordered mesoporous carbon (NOMC) is studied.