Dissociation and thermal characteristics of poly(acrylic acid) modified pluronic block copolymers in aqueous solution

Recent advances of Pluronic-based copolymers functionalization in biomedical applications

The design of polymeric biocompatible nanomaterials for biological and medical applications has received special attention in recent years. Among different polymers, the triblock type copolymers (EO)_x(PO)_y(EO)_x or Pluronics® stand out due its favorable characteristics such as biocompatibility, low tissue adhesion, thermosensitivity, and structural capacity to produce different types of macro and nanostructures, e.g. micelles, vesicles, nanocapsules, nanospheres, and hydrogels. However, Pluronic itself is not the "magic bullet" and its functionalization via chemical synthesis following biologically oriented design rules is usually required aiming to improve its properties. Therefore, this paper presents some of the main publications on new methodologies for synthetic modifications and applications of Pluronic-based nanoconstructs in the biomedical field in the last 15 years. In general, the polymer modifications aim to improve physical-chemical properties related to the micellization process or physical entrapment of drug cargo, responsive stimuli, active targeting, thermosensitivity, gelling ability, and hydrogel formation. Among these applications, it can be highlighted the treatment of malignant neoplasms, infectious diseases, wound healing, cellular regeneration, and tissue engineering. Functionalized Pluronic has also been used for various purposes, including medical diagnosis, medical imaging, and even miniaturization, such as the creation of lab-on-a-chip devices. In this context, this review discusses the main scientific contributions to the designing, optimization, and improvement of covalently functionalized Pluronics aiming at new strategies focused on the multiple areas of the biomedical field.

Surface Modification of TFC-PA RO Membrane by Grafting Hydrophilic pH Switchable Poly(Acrylic Acid) Brushes

The grafting of pH-responsive poly(acrylic acid) (PAA) brushes was carried out on the surface of a commercial TFC-PA membrane using surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(t-butyl acrylate) was polymerized through the SI-ATRP method followed by its acid hydrolysis to form PAA hydrophilic polymer brushes. Surface morphology, permeation flux, salt rejection, and pore sizes were investigated. The contact angle for water was reduced from 50° for a pristine membrane to 27° for the modified membrane due to a modification with the hydrophilic functional group and its brush on membrane surfaces. The flux rate also increased noticeably at lower pH values relative to higher pH for the modified membranes, while the flux remains stable in the case of pristine TFC-PA membranes. There is slight transition in the water flux rate that was also observed when going from pH values of 3 to 5. This was attributed to the pH-responsive conformational changes for the grafted PAA brushes. At these pH values, ionization of the COOH group takes place below and above pKa to influence the effective pore dimension of the modified membranes. At a lower pH value, the PAA brushes seem to permit tight structure conformation resulting in larger pore sizes and hence more flux. On the other hand, at higher pH values, PAA brushes appeared to be in extended conformation to induce smaller pore sizes and result in less flux. Further, pH values were observed to not significantly affect the NaCl salt rejection with values observed in between 98.8% and 95% and close to that of the pristine TFC-PA membranes. These experimental results are significant and have immediate implication for advances in polymer technology to design and modify the “switchable membrane surfaces” with controllable charge distribution and surface wettability, as well as regulation of water flux and salt.

Thermoresponsive Water Transportation in Dually Electrostatically Crosslinked Nanocomposite Hydrogels

Controlling water transportation within hydrogels makes hydrogels attractive for diverse applications, but it is still a very challenging task. Herein, a novel type of dually electrostatically crosslinked nanocomposite hydrogel showing thermoresponsive water absorption, distribution, and dehydration processes are developed. The nanocomposite hydrogels are stabilized via electrostatic interactions between negatively charged poly(acrylic acid) and positively charged layered double hydroxide (LDH) nanosheets as well as poly(3-acrylamidopropyltrimethylammonium chloride). Both LDH nanosheets as crosslinkers and the surrounding temperatures played pivotal roles in tuning the water transportation within these nanocomposite hydrogels. By changing the surrounding temperature from 60 to 4 °C, these hydrogels showed widely adjustable swelling times between 2 and 45 days, while the dehydration process lasted between 7 and 27 days. A swift temperature decrease, for example, from 60 to 25 °C, generated supersaturation within these nanocomposite hydrogels, which further retarded the water transportation and distribution in hydrogel networks. Benefiting from modified water transportation and rapidly alternating water uptake capability during temperature change, pre-loaded compounds can be used to track and visualize these processes within nanocomposite hydrogels. At the same time, the discharge of water and loaded compounds from the interior of hydrogels demonstrates a thermoresponsive sustained release process.

Pyrene-Terminated, Amphiphilic Polypeptide and Its Hydrogen-Bonded Interpolymer Complex as Delivery Systems of Doxorubicin

The intensity ratio between the first (373 nm) and the third (383 nm) vibronic peaks [I ₁/I ₃, as the pyrene (Py) scale] of fluorescent Py was used to monitor the critical concentration, drug-loading, and -releasing behaviors of a Py-terminated, amphiphilic polypeptide PPM and its hydrogen-bonded interpolymer complex (HIPC) with poly(acrylic acid) (PAA). Primarily, an amphiphilic PPM with a hydrophobic Py terminal and hydrophilic methoxy-bis(ethylene oxide) pendant groups was synthesized through multiple preparative steps, and the resultant PPM was thoroughly mixed with PAA through a preferable hydrogen bond (H bond) interaction to form HIPC. The emission study suggested that the I ₁/I ₃ ratio and the quantum yield (Φ_F) are effective in determining the critical concentrations of the aqueous PPM and PPM/PAA solutions. Moreover, the I ₁/I ₃ ratio and Φ_F were found to be convenient measures for determining the amounts of doxorubicin drugs loaded by and released from the aqueous PPM and PPM/PAA solutions.