Dependence of structure of polymer side chain on water structure in hydrogels

Confined Water Dominates Ion/Molecule Transport in Hydrogel Nanochannels

Current artificial nanochannels rely more on charge interactions for intelligent mass transport. Nevertheless, popular charged nanochannels would lose their advantages in long-term applications. Confined water, an indispensable transport medium in biological nanochannels, dominating the transport process in the uncharged nanochannels perfectly provides a new perspective. Herein, we achieve confined-water-dominated mass transport in hydrogel nanochannels (HNCs) constructed by in situ photopolymerization of acrylic acid (PAA) hydrogel in anodic alumina (AAO) nanochannels. HNCs show selectivity to Na+ transport and a high transport rate of molecules after introducing Na+/Li+, compared with other alkali metal ions like Cs+/K+. The mechanism given by ATR-FTIR shows that the hydrogen-bonding structure of confined water in HNCs is destabilized by Na+/Li+, which facilitates mass transport, but is constrained by Cs+/K+, resulting in transport inhibition. This work elucidates the relationship between confined water and mass transport in uncharged nanochannels while also presenting a strategy for designing functional nanochannel devices.

Clay nanoflakes and organic molecules synergistically promoting CO2 hydrate formation

Carbon dioxide (CO₂) reduction is an urgent challenge worldwide due to the dramatically increased CO₂ concentration and concomitant environmental problems. Geological CO₂ storage in gas hydrate in marine sediment is a promising and attractive way to mitigate CO₂ emissions owning to its huge storage capability and safety. However, the sluggish kinetics and unclear enhancing mechanisms of CO₂ hydrate formation limit the practical application of hydrate-based CO₂ storage technologies. Here, we used vermiculite nanoflakes (VMNs) and methionine (Met) to investigate the synergistic promotion of natural clay surface and organic matter on CO₂ hydrate formation kinetics. Induction time and t₉₀ in VMNs dispersion with Met were shorter by one to two orders of magnitude than Met solution and VMNs dispersion. Besides, CO₂ hydrate formation kinetics showed significant concentration-dependence on both Met and VMNs. The side chains of Met can promote CO₂ hydrate formation by inducing water molecules to form a clathrate-like structure. However, when Met concentration exceeded 3.0 mg/mL, the critical amount of ammonium ions from dissociated Met distorted the ordered structure of water molecules, inhibiting CO₂ hydrate formation. Negatively charged VMNs can attenuate this inhibition by adsorbing ammonium ions in VMNs dispersion. This work sheds light on the formation mechanism of CO₂ hydrate in the presence of clay and organic matter which are the indispensable constituents of marine sediments, also contributes to the practical application of hydrate-based CO₂ storage technologies.

Structure and Diffusive Properties of Water in Polymer Hydrogels

To investigate the diffusive properties of water in hydrogels, ab initio molecular orbital and molecular dynamics calculations of poly-N,N-dimethylacrylamide-water systems were performed. The results show that the mean diffusion coefficient of water drastically decreases in the middle dehydration stage. In this stage, the mobilities of water are restrained because part of the water forms hydrogen bonds to bind polymer chains due to a glass transition. In addition to the three well-known types of water (i.e., bound, intermediate, and free water) around hydrophilic polymers in hydrogels, our results suggest that the intermediate water can be further classified into two types: first and second intermediate water. The bound and first intermediate water acts as a cross-linker between polymer chains, even if the polymer does not form intra- or intermolecular bonds itself. The diffusive properties of water might have important implications for the interpretation of properties of polymer hydrogels.

Ultrastretchable and adhesive agarose/Ti3C2Tx-crosslinked-polyacrylamide double-network hydrogel for strain sensor

A novel agarose/Ti₃C₂T_x-crosslinked-polyacrylamide (AG/T-PAM) double-network (DN) hydrogel is synthesized by combining heating-cooling and γ-ray radiation-induced polymerization. The AG/T-PAM DN hydrogel possesses excellent mechanical properties with 4250% stretchability, and good adhesion to different substrates, such as an adhesive strength of 1148 kPa to copper at 30 °C. The resultant hydrogel also exhibits excellent tensile and compression sensing properties due to the variation of conductive network within hydrogel. The flexible and wearable strain sensor composed of the AG/T-PAM DN hydrogel presents rapid response to strain withstand 1000 cycles, and can monitor various movements of human body with a high sensibility. The AG/T-PAM DN hydrogel-based strain sensor will have broad application in large-scale strain detection scenarios requiring high sensitivity and adhesion.

Water as the often neglected medium at the interface between materials and biology

Despite its apparent simplicity, water behaves in a complex manner and is fundamental in controlling many physical, chemical and biological processes. The molecular mechanisms underlying interaction of water with materials, particularly polymer networks such as hydrogels, have received much attention in the research community. Despite this, a large gulf still exists in applying what is known to rationalize how the molecular organization of water on and within these materials impacts biological processes. In this perspective, we outline the importance of water in biomaterials science as a whole and give indications for future research directions towards emergence of a complete picture of water, materials and biology.

Analyzing the Water Confined in Hydrogel Using Near-Infrared Spectroscopy

Analysis of the confined water in hydrogels is essential for understanding the chemical and physical properties. Methods to quantify the content and study the structure of water in hydrogel using near-infrared (NIR) spectroscopy were proposed. The NIR spectra of poly-N,N-dimethylacrylamide (PDMAA) hydrogel with different water contents were measured at different temperatures. A partial least squares (PLS) model was established using the spectra of the samples with water content (w_h) from 0.9 to 387.6%. Continuous wavelet transform (CWT) was adopted to calculate the resolution enhanced spectra from which the spectral features of water species with free OH (S₀) and with one or two hydrogen bonds (S₁ and S₂) was obtained. The variation of these water species with water content suggests the existence of the water molecules bonding to NH groups by one hydrogen bond (S_1NH) and hydrating the CH groups of the polymer network and bulk-like water. Moreover, the variation of water structures with temperature shows that the release of bulk-like water occurs in the phase transition of the hydrogel, but the S_1NH and the hydration water stay unchanged. The former explains the sudden volume shrinkage for the phase transition and the latter may be the reason for the shape memory effect in the repeated swelling and deswelling of hydrogels.

Elemental Sulfur-Stabilized Liquid Marbles: Properties and Applications

Sulfur-stabilized liquid marbles were readily prepared by rolling water droplets on a sulfur (S₈) powder bed. Because of the construction of a gel layer on the surface of liquid marbles, the resulting liquid marbles have shape-designable characteristics. The effects of rolling time and volume of droplets on the deformability of sulfur-stabilized liquid marbles were investigated along with their mechanical stability and lifetime. The capability of sulfur-stabilized liquid marbles to be deformed at different pH values enables these liquid marbles to act as microreservoirs with desired shapes for aqueous solutions. Immersing the sulfur-stabilized liquid marbles into organic liquids leads to an increase in the liquid marbles' lifetime, and thereby they can survive at the interface of aqueous-organic two-phased systems for a long time. Finally, the applications of sulfur-stabilized liquid marbles as photocatalytic microreactors, electrochemical microcells, and monodisperse Pickering-like emulsions were demonstrated.

Mineralized Soft and Elastic Polymer Dot Hydrogel for a Flexible Self-Powered Electronic Skin Sensor

We propose an integrated, self-powered, flexible electronic skin device containing an alginate-derived polymer dot (A-PD)-incorporated mineralized hydrogel-based energy storage unit and a chitosan-derived n-type carbon dot (N-CD)-based solar cell for an energy-harvesting unit. This study demonstrates a unique architecture of mineralized hydrogel comprising A-PD-incorporated poly(acrylic acid) (PAA)/CaCO₃/laponite containing soft and sensitive layers, deposited with a polyaniline electrode to serve as an energy storage unit. The self-assembly was achieved through the ionic cross-linking between A-PD and PAA driven by the mineralization process, resulting in excellent dimensional stability and improved mechanical properties of the hydrogel. The sp² carbon-rich A-PD enhances the electrochemical performance and the overall photon-to-electrical conversion and storage efficiency for self-powered devices by the formation of the bridge of electrons between the ionized polymer and metal ion. The capacitive sensor developed in this study exhibits high sensitivity in detecting small pressure changes, such as the falling of small water droplets. The self-powered sensing device can detect and monitor various human motions continuously by harvesting light energy from outdoor sunlight. Furthermore, the energy-autonomous device exhibits unique responses for handwriting characters stably and repeatedly. The proposed system may be applicable to human-machine interfaces, biomonitoring systems, secure communication, and wearable devices.

Properties of Water Bound in Hydrogels

In this review, the importance of water in hydrogel (HG) properties and structure is analyzed. A variety of methods such as ¹H NMR (nuclear magnetic resonance), DSC (differential scanning calorimetry), XRD (X-ray powder diffraction), dielectric relaxation spectroscopy, thermally stimulated depolarization current, quasi-elastic neutron scattering, rheometry, diffusion, adsorption, infrared spectroscopy are used to study water in HG. The state of HG water is rather non-uniform. According to thermodynamic features of water in HG, some of it is non-freezing and strongly bound, another fraction is freezing and weakly bound, and the third fraction is non-bound, free water freezing at 0 °C. According to structural features of water in HG, it can be divided into two fractions with strongly associated and weakly associated waters. The properties of the water in HG depend also on the amounts and types of solutes, pH, salinity, structural features of HG functionalities.

Quantifying the role of silver nanoparticles in the modulation of the thermal energy storage properties of PAM–Ag nanocomposites

A nanocomposite impregnated with a picomolar concentration of Ag NPs exhibits unprecedented thermal properties and efficiently converts optical energy to thermal energy.

Surface charge-bias impact of amine-contained pseudozwitterionic biointerfaces on the human blood compatibility

This work discusses the impact of the charge bias and the hydrophilicity on the human blood compatibility of pseudozwitterionic biomaterial gels. Four series of hydrogels were prepared, all containing negatively-charged 3-sulfopropyl methacrylate (SA), and either acrylamide, N-isopropylacrylamide, 2-dimethylaminoethyl methacrylate (DMAEMA) or [2-(methacryloyloxy)ethyl]trimethylammonium (TMA), to form S_nA_m, S_nN_m, S_nD_m or S_nT_m hydrogels, respectively. An XPS analysis proved that the polymerization was well controlled from the initial monomer ratios. All gels present high surface hydrophilicity, but varying bulk hydration, depending on the nature/content of the comonomer, and on the immersion medium. The most negative interfaces (pure SA, S7A3, S5A5) showed significant fibrinogen adsorption, ascribed to the interactions of the αC domains of the protein with the gels, then correlated to considerable platelet adhesion; but low leukocyte/erythrocyte attachments were measured. Positive gels (excess of DMAEMA or TMA) are not hemocompatible. They mediate protein adsorption and the adhesion of human blood cells, through electrostatic attractive interactions. The neutral interfaces (zeta potential between -10mV and +10mV) are blood-inert only if they present a high surface and bulk hydrophilicity. Overall, this study presents a map of the hemocompatible behavior of hydrogels as a function of their surface charge-bias, essential to the design of blood-contacting devices.