Morphological changes in poly(l-lactide)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends induced by different miscibility

Co-Crystallization between Aliphatic Polyesters through Co-Inclusion Complexation with Small Molecule

Crystalline/crystalline blends of polymer have shown advantages in the preparation of new polymeric materials. However, the regulation of co-crystallization in a blend is still full of challenges due to the preferential self-crystallization driven by thermodynamics. Here, an inclusion complex approach is proposed to facilitate the co-crystallization between crystalline polymers, because the crystallization process displays a prominent kinetics advantage when polymer chains are released from the inclusion complex. Poly(butylene succinate) (PBS), poly(butylene adipate) (PBA) and urea are chosen to form co-inclusion complexes, where PBS and PBA chains play as isolated guest molecules and urea molecules construct the host channel framework. The coalesced PBS/PBA blends are obtained by fast removing the urea framework and systematically investigated by differential scanning calorimetry, X-ray diffraction, proton nuclear magnetic resonance and Fourier transformation infrared spectrometry. It is demonstrated that PBA chains are co-crystallized into PBS extended-chain crystals in the coalesced blends, while such a phenomenon has not been detected in simply co-solution-blended samples. Though PBA chains could not be totally accommodated in the PBS extended-chain crystals, their co-crystallized content increases with the initial feeding ratio of PBA. Consequently, the melting point of the PBS extended-chain crystal gradually declines from 134.3 °C to 124.2 °C with an increasing PBA content. The PBA chains playing as defects mainly induce lattice expansion along the a-axis. In addition, when the co-crystals are soaked in tetrahydrofuran, some of the PBA chains are extracted out, leading to damage to the correlative PBS extended-chain crystals. This study shows that co-inclusion complexation with small molecules could be an effective way to promote co-crystallization behavior in polymer blends.

Polyhydroxybutyrate blends: A solution for biodegradable packaging?

Poly (3-hydroxybutyrate) (PHB) is a valuable bio-based and biodegradable polymer that may substitute common polymers in packaging and biomedical applications provided that the production cost is reduced and some properties improved. Blending PHB with other biodegradable polymers is the most simple and accessible route to reduce costs and to improve properties. This review provides a comprehensive overview on the preparation, properties and application of the PHB blends with other biodegradable polyesters such as medium-chain-length polyhydroxyalkanoates, poly(ε-caprolactone), poly(lactic acid), poly(butylene succinate), poly(propylene carbonate) and poly (butylene adipate-co-terephthalate) or polysaccharides and their derivatives. A special attention has been paid to the miscibility of PHB with these polymers and the compatibilizing methods used to improve the dispersion and interface. The changes in the PHB morphology, thermal, mechanical and barrier properties induced by the second polymer have been critically analyzed in view of industrial application. The biodegradability and recyclability strategies of the PHB blends were summarized along with the processing techniques adapted to the intended application. This review provides the tools for a better understanding of the relation between the micro/nanostructure of PHB blends and their properties for the further development of PHB blends as solutions for biodegradable packaging.

Development of Bionanocomposites Based on Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/PolylActide Blends Reinforced with Cloisite 30B

In the present study, poly(3-hydroxybuturate-co-3-hydroxyvalerate) (PHBV) and plasticized polylactide acid (PLA) blends were processed by melt extrusion with different weight ratio (up to 20 wt.% of PHBV). Bionanocomposites were obtained through the incorporation of an organomodified montmorillonite (C30B) at 3 wt.%. The main features of the processing and physico-chemical characterization of films and injected samples were assessed and the influence of the components on the chemical, thermal and mechanical properties of the bionanocomposites was investigated. The results indicated that plasticized PLA/PHBV/C30B bionanocomposites present optimal mechanical properties for sanitary applications. Moreover, plasticized PLA/PHBV could lead to finely tuned biomaterials able to form electrospun nanofibers.

Analysis of molecular orientation in polymeric spherulite using polarized micro attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic imaging

Micro ATR-FTIR spectroscopic imaging enables the visualization of two-dimensional chemical distribution at a higher spatial resolution than macro-transmission FTIR imaging approach. In this study, micro ATR-FTIR imaging was applied for analysis of a specific morphology in a spherulite of poly(3-hydroxybutyrate) (PHB). The PHB spherulites crystallized at an isothermal condition, showed the fine band structure due to the twisting lamellar crystals during the spherulite growth under the polarized optical microscope (POM). In addition, the band structure observed in the PHB spherulite was the double band pattern in which the higher and lower birefringence banded areas alternatively appear due to the three-dimensional orientation of crystallographic axes and the biaxial refractive index ellipsoid of PHB crystalline structure. Micro ATR-FTIR spectroscopic imaging was employed for detecting the double band structure in the PHB spherulite. However, the obtained spectral images did not indicate any band structures. To detect the difference of molecular orientation among the double band structures, the micro ATR-FTIR imaging was performed with a linear polarizer at four different angles. The mean values of absorbance in each measured area changed depending on the polarizer angle. The in-plane molecular orientation to the tangential direction of spherulite, caused by the dependence of the average absorbance on the polarizer angles, was determined by the position of measured area in the spherulite and the linear dicroism of each of the spectral band used. To visualize the small difference of molecular orientation in the double band structure, micro ATR-FTIR images of the dichroic differences at three spectral bands were calculated from two different sets of polarizer angles. The micro ATR-FTIR images representing the dichroic differences displayed their corresponding distributions among three spectral bands. The complementary distributions of the dichroic difference were caused by the crystallographic orientation of b- and c-axes and were successfully visualized to reveal the pattern with the features less than 10 μm in size. The results achieved in this study were due to two advantages of the polarized micro ATR-FTIR imaging: the high spatial resolution of micro ATR-FTIR imaging technique, and the high sensitivity of polarization measurements. Thus, this work demonstrates the power of this spectroscopic approach for such analytical investigation.