Chitosan as inter-cellular linker to accelerate multicellular spheroid generation in hydrogel scaffold

Multidimensional controllable fabrication of tumor spheroids based on a microfluidic device

Multicellular tumor spheroids (MCTSs) are in vitro solid tumor models with physiological relevance. To achieve robust process control, a MCTS fabrication method that combines cell membrane engineering and droplet microfluidic techniques is designed. The fluidic control and the chemical interactions between biotin and streptavidin enable artificial cell aggregation to be accomplished in seconds. Then, spheroids with a uniform size are fabricated within alginate microcapsules. Microfluidic mixing-based cell aggregation regulates the cell aggregate size and the spheroid composition, and the microcapsules regulate the size of spheroids from 120 to 180 μm. The method shows applicability for various cancer cell lines, including HCT116, HepG2, and A549. In addition, composite colon cancer spheroids consisting of HCT116 and NIH3T3 with predetermined cell ratios and uniform distributions are produced. The generated MCTSs are assessed using the ELISA and UPLC-MS/MS techniques. The release of vascular endothelial growth factor (VEGF) and the 5-fluorouracil (5-FU) resistance differ in the monotypic and cocultured colon cancer models. Our method provides a robust way to produce consistent and customized MCTSs in cancer research and drug screening.

Chitosan and Pectin Hydrogels for Tissue Engineering and In Vitro Modeling

Hydrogels are fascinating biomaterials that can act as a support for cells, i.e., a scaffold, in which they can organize themselves spatially in a similar way to what occurs in vivo. Hydrogel use is therefore essential for the development of 3D systems and allows to recreate the cellular microenvironment in physiological and pathological conditions. This makes them ideal candidates for biological tissue analogues for application in the field of both tissue engineering and 3D in vitro models, as they have the ability to closely mimic the extracellular matrix (ECM) of a specific organ or tissue. Polysaccharide-based hydrogels, because of their remarkable biocompatibility related to their polymeric constituents, have the ability to interact beneficially with the cellular components. Although the growing interest in the use of polysaccharide-based hydrogels in the biomedical field is evidenced by a conspicuous number of reviews on the topic, none of them have focused on the combined use of two important polysaccharides, chitosan and pectin. Therefore, the present review will discuss the biomedical applications of polysaccharide-based hydrogels containing the two aforementioned natural polymers, chitosan and pectin, in the fields of tissue engineering and 3D in vitro modeling.

The Preparation of Novel P(OEGMA-co-MEO2MA) Microgels-Based Thermosensitive Hydrogel and Its Application in Three-Dimensional Cell Scaffold

Thermosensitive hydrogel scaffolds have attracted particular attention in three-dimensional (3D) cell culture. It is very necessary to develop a type of thermosensitive hydrogel material with low shrinkage, and excellent biocompatibility and biodegradability. Here, five types of thermosensitive microgels with different volume phase transition temperature (VPTT) or particle sizes were first synthesized using 2-methyl-2-propenoic acid-2-(2-methoxyethoxy) ethyl ester (MEO₂MA) and oligoethylene glycol methyl ether methacrylate (OEGMA) as thermosensitive monomers by free radical polymerization. Their VPTT and particle sizes were investigated by a nanometer particle size meter and an ultraviolet spectrophotometer. The feasibility of using these P(OEGMA-co-MEO₂MA) microgels to construct thermosensitive hydrogel by means of the thermal induction method is discussed for the first time. The prepared thermosensitive hydrogel with the optimum performance was screened for in situ embedding and three-dimensional (3D) culture of MCF-7 breast cancer cells. The experimental results of AO/EB and MTT methods indicate that the pioneering scaffold material has prominent biocompatibility, and cells grow rapidly in the 3D scaffold and maintain high proliferative capacity. At the same time, there is also a tendency to aggregate to form multicellular spheres. Therefore, this original P(OEGMA-co-MEO₂MA) thermosensitive hydrogel can serve as a highly biocompatible and easily functionalized 3D cell culture platform with great potential in the biomedical area.

Spontaneous Formation of 3D Breast Cancer Tissues on Electrospun Chitosan/Poly(ethylene oxide) Nanofibrous Scaffolds

Three-dimensional (3D) tissue culture has attracted a great deal of attention as a result of the need to replace the conventional two-dimensional cell cultures with more meaningful methods, especially for understanding the sophisticated nature of native tumor microenvironments. However, most techniques for 3D tissue culture are laborious, expensive, and limited to spheroid formation. In this study, a low-cost and highly effective nanofibrous scaffold is presented for spontaneous formation of reproducible 3D breast cancer microtissues. Experimentally, aligned and non-aligned chitosan/poly(ethylene oxide) nanofibrous scaffolds were prepared at one of two chitosan concentrations (2 and 4 wt %) and various electrospinning parameters. The resulting fabricated scaffolds (C2P1 and C4P1) were structurally and morphologically characterized, as well as analyzed in silico. The obtained data suggest that the fiber diameter, surface roughness, and scaffold wettability are tunable and can be influenced based on the chitosan concentration, electrospinning conditions, and alignment mode. To test the usefulness of the fabricated scaffolds for 3D cell culture, a breast cancer cell line (MCF-7) was cultured on their surfaces and evaluated morphologically and biochemically. The obtained data showed a higher proliferation rate for cells grown on scaffolds compared to cells grown on two-dimensional adherent plates (tissue culture plate). The MTT assay revealed that the rate of cell proliferation on nanofibrous scaffolds is statistically significantly higher compared to tissue culture plate (P ≤ 0.001) after 14 days of culture. The formation of spheroids within the first few days of culture shows that the scaffolds effectively support 3D tissue culture from the outset of the experiment. Furthermore, 3D breast cancer tissues were spontaneously formed within 10 days of culture on aligned and non-aligned nanofibrous scaffolds, which suggests that the scaffolds imitate the in vivo extracellular matrix in the tumor microenvironment. Detailed mechanisms for the spontaneous formation of the 3D microtissues have been proposed. Our results suggest that scaffold surface topography significantly influences tissue formation and behavior of the cells.

A thermo-sensitive chitosan/pectin hydrogel for long-term tumor spheroid culture

Hydrogels represent a key element in the development of in vitro tumor models, by mimicking the typical 3D tumor architecture in a physicochemical manner and allowing the study of tumor mechanisms. Here we developed a thermo-sensitive, natural polymer-based hydrogel, where chitosan and pectin were mixed and, after a weak base-induced chitosan gelation, a stable semi-Interpenetrating Polymer Network formed. This resulted thermo-responsive at 37 °C, injectable at room temperature, stable up to 6 weeks in vitro, permeable to small/medium-sized molecules (3 to 70 kDa) and suitable for cell-encapsulation. Tunable mechanical and permeability properties were obtained by varying the polymer content. Optimized formulations successfully supported the formation and growth of human colorectal cancer spheroids up to 44 days of culture. The spheroid dimension and density were influenced by the semi-IPN stiffness and permeability. These encouraging results would allow the implementation of faithful tumor models for the study and development of personalized oncological treatments.

Diels-Alder Cross-Linked, Washing-Free Hydrogel Films with Ordered Wrinkling Patterns for Multicellular Spheroid Generation

Three-dimensional (3D) multicellular spheroids are a new generation in vitro cell model, however, their applications are severely limited by difficulties in their generation. Here patterned poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel films were synthesized for their generation. Instead of polymerization of HEMA monomers in the presence of a cross-linker, here the PHEMA films were synthesized by cross-linking furan-functionalized linear PHEMA, PHEMA-furan, and maleimide-functionalized linear PHEMA, PHEMA-mal, via Diels-Alder (DA) reaction between furan and maleimide groups. A thermal treatment temperature of 75 °C was chosen for the cross-linking reaction. The occurrence of DA reaction was confirmed by IR spectra. Using this method, cross-linked PHEMA films with smooth surface were successfully synthesized in situ in the well of cell culture plates. The films were then patterned by simply adding water to swell them. Highly ordered, honeycomb-like wrinkling patterns were successfully obtained by adjusting the furan and maleimide contents in the precursor linear polymers. The patterned hydrogel films were used to generate multicellular spheroids. Guided by the patterns, 3D spheroids with narrow size distribution, tunable size, and high cell viability were successfully obtained. The patterned PHEMA films reported here exhibited a lot of advantages. The patterning method was quite simple and required no template or special equipment. They were synthesized in situ in commercial cell culture plates. Particularly, thanks to the clean nature of the DA reaction, no low molecular weight monomer, cross-linker, initiator, or catalyst, which were potentially cytotoxic, was involved in the film synthesis, and no byproduct was produced and left in the film. The resulting films presented a high biocompatibility, allowing the avoidance of the tedious washing step. The films synthesized here were expected to have high potential for massive production of well-defined multicellular spheroids.

Mechanical stimulation enhances development of scaffold-free, 3D-printed, engineered heart tissue grafts

Current efforts to engineer a clinically relevant tissue graft from human-induced pluripotent stem cells (hiPSCs) have relied on the addition or utilization of external scaffolding material. However, any imbalance in the interactions between embedded cells and their surroundings may hinder the success of the resulting tissue graft. Therefore, the goal of our study was to create scaffold-free, 3D-printed cardiac tissue grafts from hiPSC-derived cardiomyocytes (CMs), and to evaluate whether or not mechanical stimulation would result in improved graft maturation. To explore this, we used a 3D bioprinter to produce scaffold-free cardiac tissue grafts from hiPSC-derived CM cell spheroids. Static mechanical stretching of these grafts significantly increased sarcomere length compared to unstimulated free-floating tissues, as determined by immunofluorescent image analysis. Stretched tissue was found to have decreased elastic modulus, increased maximal contractile force, and increased alignment of formed extracellular matrix, as expected in a functionally maturing tissue graft. Additionally, stretched tissues had upregulated expression of cardiac-specific gene transcripts, consistent with increased cardiac-like cellular identity. Finally, analysis of extracellular matrix organization in stretched grafts suggests improved remodeling by embedded cardiac fibroblasts. Taken together, our results suggest that mechanical stretching stimulates hiPSC-derived CMs in a 3D-printed, scaffold-free tissue graft to develop mature cardiac material structuring and cellular fates. Our work highlights the critical role of mechanical conditioning as an important engineering strategy toward developing clinically applicable, scaffold-free human cardiac tissue grafts.

A review of manufacturing capabilities of cell spheroid generation technologies and future development

Spheroid culture provides cells with a three-dimensional environment that can better mimic physiological conditions compared to monolayer culture. Technologies involved in the generation of cell spheroids are continuously being innovated to produce spheroids with enhanced properties. In this paper, we review the manufacturing capabilities of current cell spheroid generation technologies. We propose that spheroid generation technologies should enable tight and robust process controls to produce spheroids of consistent and repeatable quality. Future technology development for the generation of cell spheroids should look into improvement in process control, standardization, scalability and monitoring, in addition to advanced methods of spheroid transfer and characterization.

Topography-Induced Cell Self-Organization from Simple to Complex Aggregates

Self-organization is a fundamental and indispensable process in a living system. To understand cell behavior in vivo such as tumorigenesis, 3D cellular aggregates, instead of 2D cellular sheets, have been employed as a vivid in vitro model for self-organization. However, most focus on the macroscale wetting and fusion of cellular aggregates. In this study, it is reported that self-organization of cells from simple to complex aggregates can be induced by multiscale topography through confined templates at the macroscale and cell interactions at the nanoscale. On the one hand, macroscale templates are beneficial for the organization of individual cells into simple and complex cellular aggregates with various shapes. On the other hand, the realization of these macro-organizations also depends on cell interactions at the nanoscale, as demonstrated by the intimate contact between nanoscale pseudopodia stretched by adjacent frontier cells, much like holding hands and by the variation in the intermolecular interactions based on E-cadherin. Therefore, these findings may be very meaningful for clarifying the organizational mechanism of tumor development, tissue engineering and regenerative medicine.

Advances in multicellular spheroids formation

Three-dimensional multicellular spheroids (MCSs) have a complex architectural structure, dynamic cell-cell/cell-matrix interactions and bio-mimicking in vivo microenvironment. As a fundamental building block for tissue reconstruction, MCSs have emerged as a powerful tool to narrow down the gap between the in vitro and in vivo model. In this review paper, we discussed the structure and biology of MCSs and detailed fabricating methods. Among these methods, the approach in microfluidics with hydrogel support for MCS formation is promising because it allows essential cell-cell/cell-matrix interactions in a confined space.