Polystyrene comb architectures as model systems for the optimized solution electrospinning of branched polymers

Research on topological effect of natural small molecule and high-performance antibacterial air filtration application by electrospinning

The application of natural small molecule (NSM) in electrospun fibers is the key to achieving powerful functionality and sustainable development. However, the lack of understanding regarding the mechanism for loading NSM hinders the advancement of high-performance functional fibers. This work clarified the loading mechanism of NSM in polymer solution by comparing the different behaviors of curcumin (Cur), phloretin (PL), and tea polyphenols (TP) blended ethyl cellulose (EC) solutions. We found that TP may lead to the folding of polymer chains due to its strongest hydrogen bond, which in turn promoted the dispersion of TP along the polymer chain. Therefore, TP could achieve good electrospinnability at the highest loading capacity (16 times the Cur and 4 times the PL). Finally, chitosan was introduced into EC/TP to prepare tree-like nanofibers, achieving high-performance antibacterial air filtration. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.991 %, 85.5 Pa, and 0.1089 Pa-1, respectively. The bacteriostatic rates against Escherichia coli and Staphylococcus aureus were all 99.99 %. This work will promote the application of NSM and the developments of multifunctional electrospun fibers and high-performance air filters.

Polysaccharide-based antibacterial coating technologies

To tackle antimicrobial resistance, a global threat identified by the United Nations, is a common cause of healthcare-associated infections (HAI) and is responsible for significant costs on healthcare systems, a substantial amount of research has been devoted to developing polysaccharide-based strategies that prevent bacterial attachment and biofilm formation on surfaces. Polysaccharides are essential building blocks for life and an abundant renewable resource that have attracted much attention due to their intrinsic remarkable biological potential antibacterial activities. If converted into efficient antibacterial coatings that could be applied to a broad range of surfaces and applications, polysaccharide-based coatings could have a significant potential global impact. However, the ultimate success of polysaccharide-based antibacterial materials will be determined by their potential for use in manufacturing processes that are scalable, versatile, and affordable. Therefore, in this review we focus on recent advances in polysaccharide-based antibacterial coatings from the perspective of fabrication methods. We first provide an overview of strategies for designing polysaccharide-based antimicrobial formulations and methods to assess the antibacterial properties of coatings. Recent advances on manufacturing polysaccharide-based coatings using some of the most common polysaccharides and fabrication methods are then detailed, followed by a critical comparative overview of associated challenges and opportunities for future developments. STATEMENT OF SIGNIFICANCE: Our review presents a timely perspective by being the first review in the field to focus on advances on polysaccharide-based antibacterial coatings from the perspective of fabrication methods along with an overview of strategies for designing polysaccharide-based antimicrobial formulations, methods to assess the antibacterial properties of coatings as well as a critical comparative overview of associated challenges and opportunities for future developments. Meanwhile this work is specifically targeted at an audience focused on featuring critical information and guidelines for developing polysaccharide-based coatings. Including such a complementary work in the journal could lead to further developments on polysaccharide antibacterial applications.

Grafting of proteins onto polymeric surfaces: A synthesis and characterization challenge

This review aims at answering the following question: how can a researcher be sure to succeed in grafting a protein onto a polymer surface? Even if protein immobilization on solid supports has been used industrially for a long time, hence enabling natural enzymes to serve as a powerful tool, emergence of new supports such as polymeric surfaces for the development of so-called intelligent materials requires new approaches. In this review, we introduce the challenges in grafting protein on synthetic polymers, mainly because compared to hard surfaces, polymers may be sensitive to various aqueous media, depending on the pH or reductive molecules, or may exhibit state transitions with temperature. Then, the specificity of grafting on synthetic polymers due to difference of chemical functions availability or difference of physical properties are summarized. We present next the various available routes to covalently bond the protein onto the polymeric substrates considering the functional groups coming from the monomers used during polymerization reaction or post-modification of the surfaces. We also focus our review on a major concern of grafting protein, which is avoiding the potential loss of function of the immobilized protein. Meanwhile, this review considers the different methods of characterization used to determine the grafting efficiency but also the behavior of enzymes once grafted. We finally dedicate the last part of this review to industrial application and future prospective, considering the sustainable processes based on green chemistry.

Comb and Bottlebrush Polymers with Superior Rheological and Mechanical Properties

Comb and bottlebrush polymers present a wide range of rheological and mechanical properties that can be controlled through their molecular characteristics, such as the backbone and side chain lengths as well as the number of branches per molecule or the grafting density. This review investigates the impact of these characteristics specifically on the zero shear viscosity, strain hardening behavior, and plateau shear modulus. It is shown that for a comb polymer with an entangled backbone and entangled side chains, a maximum in the strain hardening factor and minimum in the zero shear viscosity η₀ can be achieved through selection of an optimum number of branches q. Bottlebrush polymers with flexible filaments and extremely low plateau shear moduli relative to linear polymers open the door for a new class of solvent-free supersoft elastomers, where their network modulus can be controlled through both the degree of polymerization between crosslinks, n_x , and the length of the side chains, n_sc , with G B B 0 ≈ ρ k T n x - 1 ( n s c + 1 ) - 1 .

Polymer-free electrospinning of tannic acid and cross-linking in water for hybrid supramolecular nanofibres

Electrospinning is the process of choice allowing the preparation of nanofibrous materials from a solution usually based on a high molar mass polymer. The solution must bring enough chain entanglements to avoid any breaking or Rayleigh instability of the electrospun jet resulting thus in the deposition of a continuous and regular solid nanofibre. It has been however shown that some few non-polymeric molecules can be electrospun without using a carrier polymer. We demonstrate here the case of tannic acid. Indeed, it was possible to electrospin this molecule solubilised in a mixture of water and ethanol as well as in pure water. Rheology, dynamic light scattering and cryo-TEM highlight the formation of tannic acid aggregates in solution. Above a critical concentration, these aggregates form a supramolecular interconnected network strong enough to allow the electrospinning of a continuous and regular nanofibre. The resulting nanoweb is mechanically stable and can be handled and wrapped. Furthermore, as opposed to the other small molecules for which polymer-free electrospinning was also demonstrated, tannic acid nanowebs can be efficiently cross-linked in water either by oxidative reaction with sodium periodate or, most interestingly, with FeIII by a combination of oxidative reaction and the formation of coordination complexes. The proposed electrospinning and cross-linking strategy is easy, of low cost, and scalable and uses non-toxic solvents as well as biocompatible and biofunctional molecules. Furthermore, thanks to the chelation capacity of tannic acid having the ability to coordinate with a wide variety of metals, hybrid smart nanowebs can be envisaged for diverse applications such as biomedical, catalysis as well as environment.

Determining electrospun morphology from the properties of protein-polymer solutions

Integrating natural macromolecules, e.g. proteins, is a progressive trend in the fabrication of biocompatible sub-micrometer fibers with tunable diameters using the electrospinning technique. The correlation between solution properties and electrospun morphology is critical; it is quite clear for synthetic linear polymer solutions but remains uncertain for solutions with protein. Here, we report the determination of electrospun morphology in protein-polymer solutions of poly(ethylene oxide) (PEO) and zein, a storage protein from corn. The viscosity of the zein/PEO mixed solutions can be well described using the Lederer-Roegiers equation and decreases with the increase of the fraction of zein. The surface tension sharply decreases above a critical concentration at the saturation of the interfacial monolayer. Correspondingly, the different electrospun morphologies-from bead, coexisting bead and fiber, to fiber and ribbon-were mapped onto a ternary phase diagram and a viscosity contour plot. Such coupling provides a clear way to determine the electrospun morphology from solution properties. The occurrence of electrospun fibers partially follows two empirical rules, while the critical point revealed from surface tension has the best approximation. The diameters of electrospun fibers were found to have a scaling relationship against concentration, zero-shear viscosity and surface tension of solutions. These scaling exponents were compared with those from typical polymer solutions. The analysis suggests that aqueous ethanol gives different solvent qualities to zein and PEO solutions, resulting in the irregular shape in the phase diagram that correlates solution properties and electrospun morphologies.

Gas Separation Properties of Polyimide Thin Films on Ceramic Supports for High Temperature Applications

Novel selective ceramic-supported thin polyimide films produced in a single dip coating step are proposed for membrane applications at elevated temperatures. Layers of the polyimides P84^®, Matrimid 5218^®, and 6FDA-6FpDA were successfully deposited onto porous alumina supports. In order to tackle the poor compatibility between ceramic support and polymer, and to get defect-free thin films, the effect of the viscosity of the polymer solution was studied, giving the entanglement concentration (C*) for each polymer. The C* values were 3.09 wt. % for the 6FDA-6FpDA, 3.52 wt. % for Matrimid^®, and 4.30 wt. % for P84^®. A minimum polymer solution concentration necessary for defect-free film formation was found for each polymer, with the inverse order to the intrinsic viscosities (P84^® ≥ Matrimid^® >> 6FDA-6FpDA). The effect of the temperature on the permeance of prepared membranes was studied for H₂, CH₄, N₂, O₂, and CO₂. As expected, activation energy of permeance for hydrogen was higher than for CO₂, resulting in H₂/CO₂ selectivity increase with temperature. More densely packed polymers lead to materials that are more selective at elevated temperatures.