A comparative study of tetraethylammonium hydroxide polymer electrolytes for solid electrochemical capacitors

Long-Shelf-Life Polymer Electrolyte Based on Tetraethylammonium Hydroxide for Flexible Zinc-Air Batteries

Flexible zinc-air batteries (ZABs) have been considered as one of the most outstanding energy storage devices for flexible and portable electronics because of their superior energy density and environmental friendliness. As the "blood" of flexible ZABs, electrolytes play a significant role in determining their performance, such as discharge working time, cycling property, and shelf life. Herein, a novel polymer electrolyte based on quaternary ammonium hydroxides is first applied in flexible zinc-air batteries. Tetraethylammonium hydroxide (TEAOH) is innovatively used as the ionic conductor with poly(vinyl alcohol) (PVA) as the polymer host in the polymer electrolyte and exhibits a good water retention capability, resulting in not only a good shelf life but also a good working life of the flexible zinc-air batteries. The fabricated polymer electrolyte maintains its high ionic conductivity of 30 mS cm^-1 even after 2 weeks. In addition, the as-assembled zinc-air batteries based on the TEAOH-PVA electrolyte exhibit excellent discharge performance and cycling life compared to those based on the commonly used KOH-PVA electrolyte, and no notable degradation is observed after 2 weeks. Furthermore, flexible TEAOH-PVA-based zinc-air batteries can power a light-emitting diode (LED) electronic watch, a mobile phone, and an LED screen, indicating the very large potential of the high-performance zinc-air batteries that are safe, cost-effective, and remarkably flexible.

Preparation and Characterization of PVA Alkaline Solid Polymer Electrolyte with Addition of Bamboo Charcoal

Natural bamboo charcoal (BC) powder has been developed as a novel filler in order to further improve performances of the polyvinyl alcohol (PVA)-based alkaline solid polymer electrolyte (ASPE) by solution casting method. X-ray diffraction patterns of composite polymer electrolyte with BC revealed the decrease in the degree of crystallinity with increasing content of BC. Scanning electron microscopy images showed pores on a micrometer scale (average diameter about 2 μm) distributed inside and on the surface of the membranes, indicating a three-dimension network formed in the polymer framework. The ionic conductivity was measured by the alternating-current (AC) impedance method, and the highest conductivity value of 6.63 × 10⁻² S·cm⁻¹ was obtained with 16 wt % of BC content and m_KOH:m_PVA = 2:1.5 at 30 °C. The contents of BC and KOH could significantly influence the conductivity. The temperature dependence of the bulk electrical conductivity displayed a combination of Arrhenius nature, and the activation energy for the ion in polymer electrolyte has been calculated. The electrochemical stability window of the electrolyte membrane was over 1.6 V. The thermogravimetric analysis curves showed that the degradation temperatures of PVA-BC-KOH ASPE membranes shifted toward higher with adding BC. A simple nickel-hydrogen battery containing PVA-BC-KOH electrolyte membrane was assembled with a maximum discharge capacity of 193 mAh·g⁻¹.

Towards flexible solid-state supercapacitors for smart and wearable electronics

Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field.

The effect of SiO2 additives on solid hydroxide ion-conducting polymer electrolytes: a Raman microscopy study

Effect of SiO₂ and particle size on hydroxide ion-conduction in an alkaline polymer electrolyte correlated to structure and chemistry.