Viscoelastic properties and physical gelation of poly (butylene adipate-co-terephthalate)/graphene nanoplatelet nanocomposites at elevated temperatures

Hydrochar as an environment-friendly additive to improve the performance of biodegradable plastics

Plastic additives affect the properties of plastics, which further determine the application range of plastics. However, most plastic additives have environmental friendliness or performance issues limiting their application. Hydrochar (HC) from waste biomass by hydrothermal carbonization has been proved to contain organic matter as function substances, like a binder, and is environment-friendly material. Currently, hydrochar as a plastic additive has not been previously reported. In this study, the HC/PBAT composites were produced by hydrochar blending with poly (butylene adipate-co-terephthalate) (PBAT) which is a biodegradable polymer. The hydrochar produced at different hydrothermal carbonization temperatures (180 °C, 210 °C, 240 °C, 270 °C, and 300 °C) and the addition of hydrochar (10 wt%, 20 wt%) were investigated. The results showed that the elastic modulus of the composites was increased by 27.4 MPa and 32.5 MPa compared with virgin PBAT while adding 10 wt% and 20 wt% hydrochar, respectively. Moreover, the stiffness of the composite was improved, and the balance of stiffness and toughness of the composites was effectively maintained when adding 10 wt% hydrochar treated at 300 °C. The elongation at break, tensile strength, and the elastic modulus of its composites were 630.8 ± 13.7%, 23.0 ± 0.4 MPa, and 100.5 ± 2.7 MPa, respectively. Furthermore, the crystallization temperature of the composites was increased after hydrochar was added into PBAT, and the maximum was 87.9 °C. It also means that hydrochar has a great nucleation effect during plastic processing. Therefore, hydrochar can be used as an environment-friendly additive to promote the performance of biodegradable plastic and promise to be applied in the field of biodegradable plastics.

Relaxation Dynamics in Polyethylene Glycol/Modified Hydrotalcite Nanocomposites

Polyethylene glycol-based nanocomposites containing an organo-modified hydrotalcite with loadings ranging from 0.5 to 5 wt.% were prepared by melt mixing performed just above the melting point of the polymer matrix. In these conditions, the dispersion of the nanofiller within the polymer matrix was quite homogeneous as revealed by TEM analyses. The effect of various thermal treatments and filler loadings was thoroughly investigated by means of rheological, morphological and gas chromatography-mass spectrometry, hyphenated to thermogravimetry analysis tests. Unfilled polyethylene glycol exhibited a continuous decrease in complex viscosity upon heating. In contrast, the complex viscosity of nanocomposites containing nanofiller loadings higher than 1 wt.% showed first a decrease, followed by an increase in the complex viscosity as the temperature increases, exhibiting a minimum between 130 and 140 °C. Annealing at 180 °C for different times further increased the viscosity of the system. This unusual behavior was explained by the occurrence of grafting reactions between the ⁻OH terminal groups of the polyethylene glycol chains and the hydroxyl groups of the organo-modified filler, thus remarkably affecting the relaxation dynamics of the system.

Microwave Attenuation of Graphene Modified Thermoplastic Poly(Butylene adipate-co-terephthalate) Nanocomposites

With the widespread development and use of electronics and telecommunication devices, electromagnetic radiation has emerged as a new pollution. In this study, we fabricated flexible multifunctional nanocomposites by incorporating graphene nanoplatelets into a soft thermoplastic matrix and investigated its performance in attenuating electromagnetic radiation over frequency ranges of C (5.85–8.2 GHz), X (8.2–12.4 GHz), and Ku bands (12.4–18 GHz). Effects of nanofiller loading, sample thickness, and radiation frequency on the nanocomposites shielding effectiveness (SE) were investigated via experimental measurements and simulation. The highest rate of increase in SE was observed near percolation threshold of graphene. Comparison of reflectivity and absorptivity revealed that reflection played a major role in nanocomposites shielding potential for all frequencies while the low absorptivity was due to high power reflection at nanocomposite surface and thin thickness. Subsequently, effective absorbance calculations revealed the great potential of nanocomposites for absorbing microwaves, reaching more than 80%. Simulations confirmed the observed nanocomposites SE behaviours versus frequency. Depending on thickness, different frequency dependency behaviours were observed; for thin samples, SE remained unchanged, while for thicker samples it exhibited either increasing or decreasing trends with increasing frequency. At any fixed frequency, increasing the thickness resulted in sine-wave periodic changes in SE with a general increasing trend.