Preparation of a one-dimensional soluble polysilsesquioxane containing phosphonic acid side-chain groups and its thermal and proton-conduction properties

Preparation of Antifog Hard Coatings Based on Carboxy-Functionalized Polyhedral Oligomeric Silsesquioxane Cross-Linked with Oligo(ethylene glycol)s

In this study, we prepared antifog hard coatings by heating a mixture of carboxy-functionalized polyhedral oligomeric silsesquioxane (POSS-C) and oligo(ethylene glycol)s (OEGs, HO(CH2CH2O) n H, n = 1-6) in N,N-dimethylformamide, applying the mixture onto a glass substrate, and subsequently removing the solvent via heating. In addition, we evaluated the water resistance, hardness, and antifogging performance of the coatings. In particular, the coating produced at a 2:1 functional group ratio of POSS-C to tetraethylene glycol (OEG, n = 4) coating exhibited high surface hardness (6H), as determined using pencil scratch testing. The coating remained clear after exposure to the vapor of warm water at 40 °C at a height of 2 cm for 10 s, demonstrating its antifogging property. Furthermore, no dissolution or cracking was observed when the POSS-C/OEG coating (n = 4, COOH/OH = 2:1) was immersed in water at room temperature for 1 h, confirming its water resistance. The Fourier transform infrared/attenuated total reflectance results showed the formation of ester bonds, indicating the construction of a network structure that enhanced the water resistance and hardness of the coating.

Ionic Liquids Containing Silsesquioxane and Cyclic Siloxane Frameworks

This paper describes the author's recent work on the preparation and properties of thermally stable ionic liquids (ILs) containing siloxane frameworks. Quaternary ammonium and imidazolium salt-type ILs containing random oligosilsesquioxane frameworks were successfully prepared via the hydrolytic condensation of the corresponding organotrialkoxysilanes by using an aqueous superacid bis(trifluoromethanesulfonyl)imide (HNTf2 ) solution as a catalyst and solvent. Imidazolium salt-type ILs containing polyhedral oligomeric silsesquioxane (POSS) frameworks were also prepared through a reaction similar to that described above by using a water/methanol mixed solution of HNTf2 . In addition, amorphous POSSs with two types of ionic groups randomly distributed in the side chain were prepared. These POSSs were ILs exhibiting fluidity at relatively low temperatures. Furthermore, imidazolium and ammonium salt-type ILs containing cyclic oligosiloxane frameworks were prepared through a reaction similar to that of the corresponding organodialkoxysilanes. The thermal decomposition temperatures of the above ILs containing siloxane frameworks were higher than those of general ILs.

Designing UiO-66-Based Superprotonic Conductor with the Highest Metal-Organic Framework Based Proton Conductivity

Metal-organic framework (MOF) based proton conductors have received immense importance recently. The present study endeavors to design two post synthetically modified UiO-66-based MOFs and examines the effects of their structural differences on their proton conductivity. UiO-66-NH₂ is modified by reaction with sultones to prepare two homologous compounds, that is, PSM 1 and PSM 2, with SO₃H functionalization in comparable extent (Zr:S = 2:1) in both. However, the pendant alkyl chain holding the -SO₃H group is of different length. PSM 2 has longer alkyl chain attachment than PSM 1. This difference in the length of side arms results in a huge difference in proton conductivity of the two compounds. PSM 1 is observed to have the highest MOF-based proton conductivity (1.64 × 10^-1 S cm^-1) at 80 °C, which is comparable to commercially available Nafion, while PSM 2 shows significantly lower conductivity (4.6 × 10^-3 S cm^-1). Again, the activation energy for proton conduction is one of the lowest among all MOF-based proton conductors in the case of PSM 1, while PSM 2 requires larger activation energy (almost 3 times). This profound effect of variation of the chain length of the side arm by one carbon atom in the case of PSM 1 and PSM 2 was rather surprising and never documented before. This effect of the length of the side arm can be very useful to understand the proton conduction mechanism of MOF-based compounds and also to design better proton conductors. Besides, PSM 1 showed proton conductivity as high as 1.64 × 10^-1 S cm^-1 at 80 °C, which is the highest reported value to date among all MOF-based systems. The lability of the -SO₃H proton of the post synthetically modified UiO-66 MOFs has theoretically been determined by molecular electrostatic potential analysis and theoretical p K_a calculation of models of functional sites along with relevant NBO analyses.

Preparation of irrefrangible polyacrylamide hybrid hydrogels using water-dispersible cyclotetrasiloxane or polyhedral oligomeric silsesquioxane containing polymerizable groups as cross-linkers

Irrefrangible polyacrylamide hybrid hydrogels were prepared using polymerizable siloxane oligomers as cross-linkers (CyTS-MNa and POSS-MNa, respectively).