Polydimethylsiloxane thin-film coating on silica nanoparticles and its influence on the properties of SiO2–polyethylene composite materials

Highly Hydrophobic Polydimethylsiloxane-Coated Expanded Vermiculite Sorbents for Selective Oil Removal from Water

Naturally abundant vermiculite clay was expanded by using an aqueous solution of H₂O₂ and its surface was modified with ultra-thin polydimethylsiloxane (PDMS) using facile thermal vapor deposition to prepare an ecologically friendly, low-cost oil sorbent that plays an important role in oil spillage remediation. The resulting PDMS-coated expanded vermiculite (eVMT@PDMS) particles exhibited adequate hydrophobicity and oleophilicity for oil/water separation, with numerous conical slit pores (a size of 0.1–100 μm) providing a great sorption capacity and an efficient capillarity-driven flow pathway for oil collection. Simply with using a physically-packed eVMT@PDMS tube (or pouch), selective oil removals were demonstrated above and beneath the surface of the water. Furthermore, these sorbents were successfully integrated and then applied to the advanced oil-collecting devices such as a barrel-shaped oil skimmer and a self-primed oil pump.

Enhancing and toughening plant oil-based polymeric materials through synergetic supramolecular and covalent interactions by introducing nucleobase-functionalized celluloses

Renewable plant oil-based polymeric materials were enhanced and toughened through complementary H-bonding interactions by introducing nucleobase-functionalized celluloses.

Surface Modification of TiO2 for Obtaining High Resistance against Poisoning during Photocatalytic Decomposition of Toluene

Titanium oxide (TiO2) nanostructures, the most widely used photocatalysts, are known to suffer from poisoning of the active sites during photocatalytic decomposition of volatile organic compounds. Partially oxidized organic compounds with low volatility stick to the catalyst surface, limiting the practical application for air purification. In this work, we studied the UV-driven photocatalytic activity of bare TiO2 toward toluene decomposition under various conditions and found that surface deactivation is pronounced either under dry conditions or humid conditions with a very high toluene concentration (~442 ppm). In contrast, when the humidity was relatively high (~34 %RH) and toluene concentration was low (~66 ppm), such deactivation was not significant. We then modified TiO2 surfaces by deposition of polydimethylsiloxane and subsequent annealing, which yielded a more hydrophilic surface. We provide experimental evidence that our hydrophilic TiO2 does not show deactivation under the conditions that induce significant deactivation with bare TiO2. Conversion of toluene into dimethylacetamide was observed on the hydrophilic TiO2 and did not result in poisoning of active sites. Our hydrophilic TiO2 shows high potential for application in air purification for extended time, which is not possible using bare TiO2 due to the significant poisoning of active sites.

Photocatalytic degradation of imidacloprid by Ag-ZnO composite

The present study focused on exploring the potential of Ag-ZnO composites for complete mineralization of imidacloprid with the aim to sustain the pollutant free safe water supply. The composites were prepared by hydrothermal method and characterized by Scanning electron microscope (SEM), Energy dispersive X-ray crystallography (EDX), X-ray diffraction (XRD) and band gap measurements. These composites were used to study the UV irradiated degradation of imidacloprid while optimizing the process parameters such as time of UV irradiation, pH of medium, pesticide concentration and composite loading. The results of the study revealed an increase in photodegradation of imidacloprid by Ag-ZnO composites than pure ZnO. Temperature and catalyst loading had a positive effect on degradation efficiency, while an inverse relation was observed between pesticide concentration and degradation. Moreover, no harmful degradation products of imidacloprid were observed in GC-MS analyses that confirmed its complete mineralization.