Exfoliation, reduction, hybridization and polymerization mechanisms in one-step microwave-assist synthesis of nanocomposite nylon-6/graphene

Graphene Modified Multifunctional Personal Protective Clothing

Personal protective clothing is intended to protect the wearer from various hazards (mechanical, biological, chemical, thermal, radiological, etc.) and inhospitable environmental conditions that may cause harm or even death. There are various types of personal protective clothing, manufactured with different materials based on hazards and end user requirements. Conventional protective clothing has impediments such as high weight, bulky nature, lack of mobility, heat stress, low heat dissipation, high physical stress, diminishing dexterity, diminishing scope of vision, lack of breathability, and reduced protection against pathogens and hazards. By virtue of the superlative properties of graphene, fabrics modified with this material can be an effective means to overcome these limitations and to improve properties such as mechanical strength, antibacterial activity, flame resistance, conductivity, and UV resistance. The limitations of conventional personal protective equipment are discussed, followed by necessary measures which might be taken to improve personal protective equipment (PPE), the unique properties of graphene, methods of graphene incorporation in fabrics, and the current research status and potential of graphene-modified performance textiles relevant to PPE.

Effect of Cross-Linking Degree of EPDM Phase on the Morphology Evolution and Crystallization Behavior of Thermoplastic Vulcanizates Based on Polyamide 6 (PA6)/Ethylene-Propylene-Diene Rubber (EPDM) Blends

As a special class of “green” elastomers, thermoplastic vulcanizates (TPVs) have been widely used in industries due to the combination of the excellent resilience of conventional elastomers and the easy recyclability of thermoplastics. Here, the morphology evolution of TPVs based on polyamide 6/ethylene-propylene-diene rubber (PA6/EPDM) blends was investigated by varying the content of the curing agent, phenolic resin (PF). With the incorporation of 6 wt% PF, the gel content of the EPDM phase reaches a high value of 49.6 wt% and a typical sea-island structure is formed with EPDM domain in a micro-nano size. The dynamic rheology behaviors of TPVs showed that with the curing degree of EPDM phase increasing, a denser network of EPDM particles is formed in PA6 matrix. Additionally, a lower crystal degree and crystal peak temperature are observed, indicating that there exists a growth restriction of PA6 crystal plate induced by a thinner plastic layer between the adjacent EPDM particles. However, the crystal form of PA6 is not changed with the increasing curing degree of the EPDM phase. This study provides an effective strategy to realize a new kind of TPVs, which can be easily introduced into industrial applications.

Preparation of polyimide films via microwave-assisted thermal imidization

A series of polyimide (PI) films based on aromatic heterocyclic monomers of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA), p-phenylenediamine (p-PDA) and 4,4′-oxydianiline (ODA) were prepared via a microwave-assisted thermal imidization and conventional thermal imidization method at different temperatures. The effects of microwave irradiation on the imidization degree, microstructures, mechanical and thermal properties of PI films were investigated. The imidization degree of the PI films treated with microwave-assisted heating reached a relatively high value at 250 °C, which was twice as much as those treated with traditional thermal imidization. The tensile strength and modulus of PI films treated with microwave-assisted imidization at 300 °C were 187.61 MPa and 2.71 GPa respectively, which were 30% higher than those of PI films treated with thermal imidization. Moreover, the order degree of polymer chains was improved by the microwave-assisted imidization method. The PI films prepared by the microwave-assisted imidization method showed excellent thermal stability with a 5% weight loss temperature of 573 °C under N₂. The microwave-assisted thermal imidization proved to be a rapid and efficient way to prepare high-performance polyimide materials.

A series of polyimide films were prepared via a microwave-assisted thermal imidization and conventional thermal imidization method at different temperatures.