Recycling of bio-polyurethane foam using high power ultrasound

Chemical recycling of polyurethane foam waste and application for antibacterial and removal of anionic and cationic dyes

The large amounts of polyurethane foam wastes (PUFWs) produced in the automobiles, buildings, and furniture industries cause many environmental problems. Therefore, the recycling of PUFWs has acquired great interest worldwide. In this study, the PUFWs were converted to new nanocomposite. The chemical modification of PUFWs was conducted through reflux with potassium permanganate in 0.1 M H2SO4. The produced PUF-COO@MnO2 nanocomposites was characterized by scanning electron microscope, energy-dispersive X-ray spectrometry, X-ray diffraction, and Magnetic susceptibility. PUF-COO@MnO2 has been used for the removal of cationic (Methylene blue) and anionic (Trypan blue) dyes from industrial wastewater. The antibacterial effect of PUF-COO@MnO2 was also examined against Gram-positive and Gram-negative bacterial strains. The adsorption capacities of PUF-COO@MnO2 for tested dyes were 277 and 269 mg/g. Moreover, PUF-COO@MnO2 showed a potent antibacterial action against B. cereus (8.8 mm) followed by S. aureus (7.5 mm) and E. coli (7.1 mm). It was concluded that PUF-COO@MnO2 can be employed as antibacterial low-cost material and for the removal of synthetic dyes from industrial effluents.

Phase Change Energy Storage Elastic Fiber: A Simple Route to Personal Thermal Management

A novel thermoplastic polyurethane (TPU) PCFs possessing a high loaded ratio and high elasticity was simply prepared by vacuum absorption following wet spinning, then coated by waterborne polyurethane (WPU). Octadecane (OCC), hexadecanol (HEO), and stearic acid (SA), which have different tendencies to form hydrogen bonds with TPU, were selected as PCMs, and their thermal behavior, thermal storge properties, and elasticity were systematically studied, respectively. The hierarchical pore structure though from the sheath to the core part of TPU filaments weakened the influence of the nonfreezing layer and hydrogen bond on the crystallization behavior of PCMs. The resulting HEO/TPU fiber has the highest enthalpy of 208.1 J/g compared with OCC and SA. Moreover, the HEO/TPU fiber has an elongation at break of 354.8% when the phase change enthalpy is as high as 177.8 J/g and the phase change enthalpy is still 174.5 J/g after fifty cycles. After ten tensile recovery cycles, the elastic recovery rate of HEO/TPU fiber was only 71.3%. When the HEO in the fiber was liquid state, the elastic recovery rate of HEO/TPU fiber promoted to 91.6%. This elastic PCFs have excellent thermal cycle stability, elastic recovery, and temperature sensitivity. It has great application potential in the fields of flexible wearable devices, intelligent fabrics, and temperature sensors.