Promotion of molecular diffusion and/or crystallization in fused deposition modeled poly(lactide) welds

Crystallisation Dynamics in Large-Scale Extrusion Additive Manufacturing: An Analysis with and without Temperature Modification

Large-Scale Material Extrusion (LS-MEX) is increasingly being used in small-scale production and prototyping due to its ability to create components in new temporal and spatial dimensions. However, the use of this manufacturing process poses microscopic and macroscopic challenges not encountered in previous small-scale production systems. These challenges arise primarily from the prolonged retention of heat in the material, which leads to insufficient strength in the extruded strands at the macrostructural level. As a result, the component can collapse, a phenomenon known as 'slumping'. Thermal energy also influences microstructural changes, such as crystallisation kinetics, which affect properties such as the strength and stiffness of the final product. The duration and dynamics of thermal energy are influenced by manufacturing parameters and the possible use of additional peripheral equipment, which affects component quality. In this study, the influence of thermal energy on structural processes through simulations of polyamide 6 with 40% carbon fibres (PA6 wt.%40 CF) is investigated. The results show that by adjusting the process parameters and using modification units, the thermal profile of the material can be accurately controlled, which allows the microstructural processes to be precisely controlled. This leads to the targeted modification of the macroscopic material properties. The focus of this work is on the combination of numerical simulations of the LS-MEX process with semi-empirical methods for the analysis of crystallisation processes. The application of the Nakamura model, which is used throughout similar investigations, allows a detailed description and prediction of the crystallisation kinetics during the manufacturing process. The study shows that the absolute degree of crystallisation can be determined with simplified assumptions using a combination of thermal simulations and semi-empirical approaches. It was found that the absolute degree of crystallisation increases from the outer interface of the strand to the print bed across the cross-section. This can be attributed to the specific thermal boundary conditions and the resulting temperature profiles at different points.

Influence of Crystallization Kinetics and Flow Behavior on Structural Inhomogeneities in 3D-Printed Parts Made from Semi-Crystalline Polymers

We report the results of a study focusing on the influence of crystallization kinetics and flow behavior on structural inhomogeneities in 3D-printed parts made from polyamide 12 (PA12) and poly(lactic acid) (PLA) by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), fast scanning calorimetry (FSC), and wide-angle X-ray diffraction (WAXD). Temperature-dependent WAXD measurements on the neat PLA filament reveal that PLA forms a single orthorhombic α phase during slow cooling and subsequent 2nd heating. The PA12 filament shows a well pronounced polymorphism with a reversible solid-solid phase transition between the (pseudo)hexagonal γ phase near room temperature and the monoclinic α' phase above the Brill transition temperature TB = 140 °C. The influence of the print bed temperature Tb on structure formation, polymorphic state, and degree of crystallinity χc of the 3D-printed parts is investigated by height and depth-dependent WAXD scans and compared with that of 3D-printed single layers, used as a reference. It is found that the heat transferred from successive layers has a strong influence on the polymorphic state of PA12 since a superimposed mixture of γ and α phases is present in the 3D-printed parts. In the case of PLA, a single α phase is formed. The print bed temperature has, in comparison to PA12, a major influence on the degree of crystallinity χc and thus the homogeneity of the 3D-printed parts, especially close to the print bed. By comparing the obtained results from WAXD, DMA, DSC, and FSC measurements with relevant printing times, guidelines for 3D-printed parts with a homogeneous structure are derived.

Fused Deposition Modelling (FDM) of Thermoplastic-Based Filaments: Process and Rheological Properties-An Overview

The fused deposition modeling (FDM) process, an extrusion-based 3D printing technology, enables the manufacture of complex geometrical elements. This technology employs diverse materials, including thermoplastic polymers and composites as well as recycled resins to encourage sustainable growth. FDM is used in a variety of industrial fields, including automotive, biomedical, and textiles, as a rapid prototyping method to reduce costs and shorten production time, or to develop items with detailed designs and high precision. The main phases of this technology include the feeding of solid filament into a molten chamber, capillary flow of a non-Newtonian fluid through a nozzle, layer deposition on the support base, and layer-to-layer adhesion. The viscoelastic properties of processed materials are essential in each of the FDM steps: (i) predicting the printability of the melted material during FDM extrusion and ensuring a continuous flow across the nozzle; (ii) controlling the deposition process of the molten filament on the print bed and avoiding fast material leakage and loss of precision in the molded part; and (iii) ensuring layer adhesion in the subsequent consolidation phase. Regarding this framework, this work aimed to collect knowledge on FDM extrusion and on different types of rheological properties in order to forecast the performance of thermoplastics.

Controlling Morphing Behavior in 4D Printing: A Review About Microstructure and Macrostructure Changes in Polylactic Acid

Four-dimensional (4D) printing combines stimulus-responsive materials with additive manufacturing (AM) technologies. This new concept of printing three-dimensional (3D) objects opens the possibility for solving processing issues, through the production of complex geometries that can undergo programmed temporal changes in response to external stimuli. However, as 4D technology emerges from AM, various challenges still need to be explored, such as the controlled morphing effect. Understanding the aspects related to this behavior, both at the macroscopic level of the structure and at the microscopic level of the polymeric chain, is fundamental. Focused on thermoplastic poly(lactic acid) (PLA) printed by fused deposition modeling, this review addressed the influence of molecular weight, polymeric chain modifications, and 3D printing parameters on the shape change effect of a PLA-based material. The glass transition temperature proved to be a highly important parameter, which can be modified by molecular weight changes. Nozzle temperature, fill density, print patterns, and raster angle are 3D printing parameters that influence the material shape change. Shape recovery is highly dependent on the recovery temperature. Potential applications for shape memory structures are also addressed in this review.

Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance

The incessant developments in the pharmaceutical and biomedical fields, particularly, customised solutions for specific diseases with targeted therapeutic treatments, require the design of multicomponent materials with multifunctional capabilities. Biodegradable polymers offer a variety of tailored physicochemical properties minimising health adverse side effects at a low price and weight, which are ideal to design matrices for hybrid materials. PLAs emerge as an ideal candidate to develop novel materials as are endowed withcombined ambivalent performance parameters. The state-of-the-art of use of PLA-based materials aimed at pharmaceutical and biomedical applications is reviewed, with an emphasis on the correlation between the synthesis and the processing conditions that define the nanostructure generated, with the final performance studies typically conducted with either therapeutic agents by in vitro and/or in vivo experiments or biomedical devices.

The Role of Molar Mass in Achieving Isotropy and Inter-Layer Strength in Mat-Ex Printed Polylactic Acid

There has been extensive research in the field of material-extrusion (Mat-Ex) 3D printing to improve the inter-layer bonding process. Much research focusses on how various printing conditions may be detrimental to weld strength; many different feedstocks have been investigated along with various additives to improve strength. Surprisingly, there has been little attention directed toward how fundamental molecular properties of the feedstock, in particular the average molar mass of the polymer, may contribute to microstructure of the weld. Here we showed that weld strength increases with decreasing average molar mass, contrary to common observations in specimens processed in more traditional ways, e.g., by compression molding. Using a combination of synchrotron infra-red polarisation modulation microspectroscopy measurements and continuum modelling, we demonstrated how residual molecular anisotropy in the weld region leads to poor strength and how it can be eradicated by decreasing the relaxation time of the polymer. This is achieved more effectively by reducing the molar mass than by the usual approach of attempting to govern the temperature in this hard to control non-isothermal process. Thus, we propose that molar mass of the polymer feedstock should be considered as a key control parameter for achieving high weld strength in Mat-Ex.

Fused Deposition Modeling of Polyamides: Crystallization and Weld Formation

International newspapers and experts have called 3D printing the industrial revolution of this century. Among all its available variants, the fused deposition modeling (FDM) technique is of greater interest since its application is possible using simple desktop printers. FDM is a complex process, characterized by a large number of parameters that influence the quality and final properties of the product. In particular, in the case of semicrystalline polymers, which afford better mechanical properties than amorphous ones, it is necessary to understand the crystallization kinetics as the processing conditions vary, in order to be able to develop models that allow having a better control over the process and consequently on the final properties of the material. In this work it was proposed to study the crystallization kinetics of two different polyamides used for FDM 3D printing and to link it to the microstructure and properties obtained during FDM. The kinetics are studied both in isothermal and fast cooling conditions, thanks to a home-built device which allows mimicking the quenching experienced during filament deposition. The temperature history of a single filament is then determined by mean of a micro-thermocouple and the final crystallinity of the sample printed in a variety of conditions is assessed by differential scanning calorimetry. It is found that the applied processing conditions always allowed for the achievement of the maximum crystallinity, although in one condition the polyamide mesomorphic phase possibly develops. Despite the degree of crystallinity is not a strong function of printing variables, the weld strength of adjacent layers shows remarkable variations. In particular, a decrease of its value with printing speed is observed, linked to the probable development of molecular anisotropy under the more extreme printing conditions.