Effect of [EMIM][BF4] ionic liquid on the properties of ultrafiltration membranes

Porous Hydrogels: Present Challenges and Future Opportunities

In this feature article, we critically review the physical properties of porous hydrogels and their production methods. Our main focus is nondense hydrogels that have physical pores besides the space available between adjacent cross-links in the polymer network. After reviewing theories on the kinetics of swelling, equilibrium swelling, the structure-stiffness relationship, and solute diffusion in dense hydrogels, we propose future directions to develop models for porous hydrogels. The aim is to show how porous hydrogels can be designed and produced for studies leading to the modeling of physical properties. Additionally, different methods that are used for making hydrogels with physically incorporated pores are briefly reviewed while discussing the potentials, challenges, and future directions for each method. Among kinetic methods, we discuss bubble generation approaches including reactions, gas injection, phase separation, electrospinning, and freeze-drying. Templating approaches discussed are solid-phase, self-assembled amphiphiles, emulsion, and foam methods.

Controlled Cationic Polymerization of p-Methylstyrene in Ionic Liquid and Its Mechanism

Ionic liquid (IL) as a green solvent is entirely composed of ions; thus, it may be more than a simple solvent for ionic polymerization. Here, the cationic polymerization of p-methylstyrene (p-MeSt) initiated by 1-chloro-1-(4-methylphenyl)-ethane (p-MeStCl)/tin tetrachloride (SnCl₄) was systematically studied in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Bmim][NTf₂]) IL at −25 °C. The results show that IL did not participate in cationic polymerization, but its ionic environment and high polarity were favorable for the polarization of initiator and monomer and facilitate the controllability. The gel permeation chromatography (GPC) trace of the poly(p-methylstyrene) (poly(p-MeSt)) changes from bimodal in dichloromethane (CH₂Cl₂) to unimodal in IL, and polydispersities M_w/M_n of the polymer in IL showed narrower (1.40–1.59). The reaction rate and heat release rate were milder in IL. The effects of the initiating system, Lewis acid concentration, and 2,6-di-tert-butylpyridine (DTBP) concentration on the polymerization were investigated. The controlled cationic polymerization initiated by p-MeStCl/SnCl₄ was obtained. The polymerization mechanism of p-MeSt in [Bmim][NTf₂] was also proposed.

Green Blends Based on Ionic Liquids with Improved Performance for Membrane Technology: Perspectives for Environmental Applications

Present research was directed towards the development of new high-performance and cost-effective polysulfone membranes (PSFQ) by introducing ionic liquids (ILs—Cyphos 101 IL and Aliquat 336) into their matrix. Variation of ILs was performed with the aim to find the one that brings new properties and improves the functionality and selectivity of PSFQ membranes in ultrafiltration processes. Based on the obtained results of the rheological study, we established the compatibility of compounds and optimal content of the used ILs, namely 3 wt% and 15 wt% Cyphos 101 IL and compositions varying between 3 and 15 wt % Aliquat 336. Results indicated that the ILs acted as plasticizers when they were added to the system, a helpful aspect in processing membranes used in water decontamination. The efficiency and performance of the membranes were evaluated by their use in the treatment of diclofenac (DCF)-containing waters. Membranes obtained from PSFQ/Aliquat 336 solution containing 15 wt% IL exhibited a 97% removal degree of DCF in the treatment process of 50 mL solution containing 3 mg/L DCF. The separation efficiency was kept constant for four filtration/cleaning cycles. The results indicated an improvement in membrane performance as the amount of IL in their structure increased, which confirms the potential for application in water treatment processes.

Effect of ionic liquid on formation of copolyimide ultrafiltration membranes with improved rejection of La3

Ultrafiltration (UF) as a widely used industrial separation method with optimal selection of membrane materials can be applied to extract rare earth metals from dilute solutions formed during the processing of electronic waste by hydrometallurgical methods. In the present work, promising UF copolyimide membranes were prepared using [hmim][TCB] ionic liquid (IL) co-solvent which can be considered as an environmentally friendly alternative to conventional solvents. The membranes were characterized by ATR-FTIR, TGA, SEM and quantum chemical calculations. A significant difference in morphology of these membranes was revealed by SEM of membrane cross-sections; the P84 membrane has finger-like structure of porous substrate in contrast to spongy structure of substrate for the P84/IL membrane due to a higher dynamic viscosity of the casting solution. The transport parameters were determined in ultrafiltration tests with pure water and an aqueous solution of bovine serum albumin. The addition of ionic liquid to the P84 casting solution increases the performance of the membrane. The rejection capacity was evaluated with respect to La³⁺ in the form of a lanthanum alizarin complex (LAC) in aqueous acetone solution. The P84 membrane prepared using IL showed a high rejection (98.5%) with respect to LAC, as well as a significant productivity.

Construction of antifouling zwitterionic membranes by facile multi-step integration method

Membrane fouling during the use of separation membrane has always been the main reason for the degradation of membrane performance. The traditional solution is complicated and inefficient, so we proposed multi-step integration method to prepare antifouling zwitterionic poly(aryl ether sulfone) (PAES-Z-x) ultrafiltration (UF) membrane with higher efficiency. We designed and synthesized a bisphenol precursor containing tertiary amine groups, which could provide reactive sites for grafting zwitterionic group. Afterwards, the zwitterionic modified UF membrane was prepared by graft copolymerization and non-solvent-induced phase separation (NIPS). The morphology, hydrophilicity, water flux and rejection of the PAES-Z-x membrane could be optimized by tuning zwitterion content. The hydration layer formed by zwitterions effectively reduced the adsorption of proteins and endowed the membrane good antifouling properties. The resulting membrane showed the pure water flux increased (up to 311 L m^-2h^-1 bar^-1), high bovine serum albumin (BSA) rejection (97%) and good water flux recovery ratio (FRR) (82.8%). Zwitterionic antifouling PAES UF membrane prepared by a simple and effective method provided a new direction for improving PAES UF membrane's antifouling performance.