Enhanced mechanical and thermal properties of polyamide 6/p (N-(4-F-phenylmaleimide)–alt-styrene) composites based on interfacial complexation inducing crystal transformation

Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels

This study focuses on polyamide 6/organo-modified montmorillonite (PA6/OMMT) nanocomposites as potential liner materials, given the growing interest in enhancing the performance of type IV composite overwrapped hydrogen storage pressure vessels. The mechanical properties of PA6/OMMT composites with varying filler concentrations were investigated across a temperature range relevant to hydrogen storage conditions (-40 °C to +85 °C). Liner collapse, a critical issue caused by rapid gas discharge, was analyzed using an Ishikawa diagram to identify external and internal factors. Mechanical testing revealed that higher OMMT content generally increased stiffness, especially at elevated temperatures. The Young's modulus and first yield strength exhibited non-linear temperature dependencies, with 1 wt. per cent OMMT content enhancing yield strength at all tested temperatures. Dynamic mechanical analysis (DMA) indicated that OMMT improves the storage modulus, suggesting effective filler dispersion, but it also reduces the toughness and heat resistance, as evidenced by lower glass transition temperatures. This study underscores the importance of optimizing OMMT content to balance mechanical performance and thermal stability for the practical application of PA6/OMMT nanocomposites in hydrogen storage pressure vessels.

Star-Branched Polyamides as the Matrix in Thermoplastic Composites

The aim of this study is the preparation of star-shaped branched polyamides (sPA6) with low melt viscosity, but also with improved mechanical properties by reactive extrusion. This configuration has been obtained by grafting a tri-functional, three-armed molecule: 5-aminoisophthalic-acid, used as a linking agent (LA). The balance between the fluidity, polarity and mechanical properties of sPA6s is the reason why these materials have been investigated for the impregnation of fabrics in the manufacture of thermoplastic composites. For these impregnation processes, the low viscosity of the melt has allowed the processing parameters (temperature, pressure and time) to be reduced, and its new microstructure has allowed the mechanical properties of virgin thermoplastic resins to be maintained. A significant improvement in the ultrasonic welding processes of the composites was also found when an energy director based on these materials was applied at the interface. In this work, an exhaustive microstructural characterization of the obtained sPAs is presented and related to the final properties of the composites obtained by film stacking.