Phosphazene functionalized silsesquioxane-based porous polymers for absorbing I2, CO2 and dyes

Hybrid Dendrimer Network based on Silsesquioxane and Glycidyl Methacrylate for Enhanced Adsorption of Iodine and Dyes in Environmental Remediation

A novel hybrid network was synthesized in two steps: the first step involved the attachment of glycidyl methacrylate (GMA) to octa(aminophenyl) silsesquioxane (OAPS) through a ring-opening reaction, forming a hybrid dendrimer structure, and the second step involved the cross-linking of hybrid dendrimer using an azobisisobutyronitrile initiator to create the final hybrid network of OAPS-GMA. The synthesized hybrid material was comprehensively characterized using fourier transform infrared Spectroscopy (FTIR), nuclear magnetic resonance ((1H, 13C, and 29Si NMR) spectroscopy, thermogravimetric Analysis (TGA), and scanning electron microscopy (SEM). The BET surface area was found to be 25.44 m2/g, and significant 2.341 cm3/g of total pore volume was observed. The TGA analysis shows that the material is highly stable up to 450 °C. The synthesized network demonstrated remarkable adsorption capacities for iodine and dyes. It exhibited an iodine adsorption capacity of 3.4 g/g from vapors and 874 mg/g from solution. Additionally, it showed significant adsorption capacities for Rhodamine B and Congo red, with values of 762 mg/g and 517 mg/g, respectively. This study not only provides a novel method for preparing GMA-functionalized silsesquioxane-based porous hybrid polymers but also contributes to advancing solutions for environmental pollution issues.

Synthesis, characterization, and photophysical and fluorescence sensor behaviors of a new water-soluble double-bridged naphthalene diimide appended cyclotriphosphazene

A new water-soluble template of double-bridged naphthalene diimide appended cyclotriphosphazene was prepared, and its photophysical and sensor behaviors were evaluated. The characterization of novel double-bridged naphthalene diimide appended cyclotriphosphazene (6) was carried out by NMR (1H, 13C, 31P) and mass spectroscopies. The photophysical behaviors of compound 6 were evaluated by UV-Vis absorption and fluorescence spectroscopies in various solvent systems and different concentrations. As an application for usability of the obtained water-soluble template in different applications, the fluorescence sensor property of compound 6 was investigated in the presence of many different competing species (organic acids, saccharides, nitroaromatic compounds, anions, and metal cations). The results obtained showed that compound 6 had selectivity against only the nitroaromatic species among the competing species tested.

Phosphazene Functionalized Silsesquioxane-Based Porous Polymer as Thermally Stable and Reusable Catalyst for Bulk Ring-Opening Polymerization of ε-Caprolactone

The bulk ring-opening polymerization (ROP) of ε-caprolactone using phosphazene-containing porous polymeric material (HPCP) has been studied at high reaction temperatures (130-150 °C). HPCP in conjunction with benzyl alcohol as an initiator induced the living ROP of ε-caprolactone, affording polyesters with a controlled molecular weight up to 6000 g mol-1 and moderate polydispersity (Ð~1.5) under optimized conditions ([BnOH]/[CL] = 50; HPCP: 0.63 mM; 150 °C). Poly(ε-caprolactone)s with higher molecular weight (up to Mn = 14,000 g mol-1, Ð~1.9) were obtained at a lower temperature, at 130 °C. Due to its high thermal and chemical stability, HPCP can be reused for at least three consecutive cycles without a significant decrease in the catalyst efficiency. The tentative mechanism of the HPCP-catalyzed ROP of ε-caprolactone, the key stage of which consists of the activation of the initiator through the basic sites of the catalyst, was proposed.

Sulfonic Acid-Grafted Hybrid Porous Polymer Based on Double-Decker Silsesquioxane as Highly Efficient Acidic Heterogeneous Catalysts for the Alcoholysis of Styrene Oxide

β-Alkoxyalcohols generated from epoxide ring-opening reactions are significant due to their enormous value as pharmaceutical intermediates and fine chemicals. Using a phenyl-substituted double-decker-type silsesquioxane as the precursor, a hybrid porous material (PCS-DDSQ) was synthesized through a Scholl coupling reaction with an AlCl₃ catalyst. Then, novel excellent Brønsted acid-derived silsesquioxane solid catalysts (PCS-DDSQ-SO₃H-x) were successfully obtained through an electrophilic aromatic substitution reaction of chlorosulfonic acid on phenyl rings of PCS-DDSQ, fully characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, powder X-ray diffraction, temperature-programmed desorption, water contact angle, Brunauer-Emmett-Teller model, thermogravimetric analysis, and solid-state ¹³C and ²⁹Si nuclear magnetic resonance techniques. The catalytic behavior of the PCS-DDSQ-SO₃H-x with different SO₃H loadings for the methanolysis of styrene oxide was compared and evaluated. The presence of SO₃H groups endows them with excellent catalytic abilities, achieving the highest values from PCS-DDSQ-SO₃H-1 (the acid site of its catalyst is 1.84 mmol/g) as 99% conversion and 100% selectivity for the methanolysis of styrene oxide in 30 min, which shows superior catalytic properties of low dosage and high efficiency. Furthermore, the PCS-DDSQ-SO₃H-1 catalyst can maintain high activity and selectivity after three cycles. This study provides a feasible method for the preparation of Brønsted solid acid catalysts with different acid loadings by introducing the sulfonic group into PCS-DDSQ.

An Ultrastable Porous Polyhedral Oligomeric Silsesquioxane/Tetraphenylthiophene Hybrid as a High-Performance Electrode for Supercapacitors

In this study, we synthesized three hybrid microporous polymers through Heck couplings of octavinylsilsesquioxane (OVS) with 2,5-bis(4-bromophenyl)-1,3,4-oxadiazole (OXD-Br₂), tetrabromothiophene (Th-Br₄), and 2,5-bis(4-bromophenyl)-3,4-diphenylthiophene (TPTh-Br₂), obtaining the porous organic–inorganic polymers (POIPs) POSS-OXD, POSS-Th, and POSS-TPTh, respectively. Fourier transform infrared spectroscopy and solid state ¹³C and ²⁹Si NMR spectroscopy confirmed their chemical structures. Thermogravimetric analysis revealed that, among these three systems, the POSS-Th POIP possessed the highest thermal stability (T₅: 586 °C; T₁₀: 785 °C; char yield: 90 wt%), presumably because of a strongly crosslinked network formed between its OVS and Th moieties. Furthermore, the specific capacity of the POSS-TPTh POIP (354 F g⁻¹) at 0.5 A g⁻¹ was higher than those of the POSS-Th (213 F g⁻¹) and POSS-OXD (119 F g⁻¹) POIPs. We attribute the superior electrochemical properties of the POSS-TPTh POIP to its high surface area and the presence of electron-rich phenyl groups within its structure.

Pyridine-based conjugated microporous polymers as adsorbents for CO2 uptake via weak supramolecular interaction

Two pyridine-based conjugated microporous polymers with high micro-porosity exhibited a high CO2 capture value via weak supramolecular interaction.

Novel Approach for the Synthesis of Chlorophosphazene Cycles with a Defined Size via Controlled Cyclization of Linear Oligodichlorophosphazenes [Cl(PCl2=N)n-PCl3]+[PCl6]. Int J Mol Sci 2021;22:ijms22115958. [PMID: 34073083 PMCID: PMC8199110 DOI: 10.3390/ijms22115958]

Despite a significant number of investigations in the field of phosphazene chemistry, the formation mechanism of this class of cyclic compounds is still poorly studied. At the same time, a thorough understanding of this process is necessary, both for the direct production of phosphazene rings of a given size and for the controlled cyclization reaction when it is secondary and undesirable. We synthesized a series of short linear phosphazene oligomers with the general formula Cl[PCl2=N]n–PCl₃⁺PCl₆^– and studied their tendency to form cyclic structures under the influence of elevated temperatures or in the presence of nitrogen-containing agents, such as hexamethyldisilazane (HMDS) or ammonium chloride. It was established that linear oligophosphazenes are inert when heated in the absence of the mentioned cyclization agents, and the formation of cyclic products occurs only when these agents are involved in the process. The ability to obtain the desired size phosphazene cycle from corresponding linear chains is shown for the first time. Known obstacles, such as side interaction with the PCl₆^– counterion and a tendency of longer chains to undergo crosslinking elongation instead of cyclization are still relevant, and ways to overcome them are being discussed.