New bifunctional cross-linkers / co-initiators for vinyl photopolymerization: Silsesquioxanes - B2 vitamin as eco-friendly hybrid photoinitiator systems

Photocurable biomaterials labeled with luminescent sensors dedicated to bioprinting

In the present study, we focused on the development and characterization of formulations that function as biological inks. These inks were doped with coumarin derivatives to act as molecular luminescent sensors that allow the monitoring of the kinetics of in situ photopolymerization in 3D (DLP) printing and bioprinting using pneumatic extrusion techniques, making it possible to study the changes in the system in real time. The efficiency of the systems was tested on compositions containing monomers: poly(ethylene glycol) diacrylates and photoinitiators: 2,4,6-trimethylbenzoyldi-phenylphosphinate and lithium phenyl-2,4,6-trimethylbenzoylphosphinate. The selected formulations were spectroscopically characterized and examined for their photopolymerization kinetics and rheological properties. This is important because of the fact that spectroscopic characterization, examination of photopolymerization kinetics, and rheological properties provide valuable insights into the behaviour of photocurable resin dedicated for 3D printing processes. The next step involved printing tests on commercially available 3D printers. In turn, printing carried out as part of the work on commercially available 3D printers further verified the effectiveness of the formulations. Moreover the formulation components and the resulting 3D objects were tested for their antiproliferative effects on the selected Chinese hamster ovary cell line, CHO-K1.

Reusable antimicrobial antibiotic-free dressings obtained by photopolymerization

In recent years significant efforts have been made to develop new materials for wound dressing with improved healing properties. However, the synthesis methods usually employed to this end are often complex or require several steps. We describe here the synthesis and characterization of antimicrobial reusable dermatological wound dressings based on N-isopropylacrylamide co-polymerized with [2-(Methacryloyloxy) ethyl] trimethylammonium chloride hydrogels (NIPAM-co-METAC). The dressings were obtained with a very efficient single-step synthesis procedure based on visible light (455 nm) by photopolymerization. To this end, F8BT nanoparticles of the conjugated polymer (poly(9,9-dioctylfluorene-alt-benzothiadiazole) - F8BT) were used as macro-photoinitiators, and a modified silsesquioxane was employed as crosslinker. Dressings obtained by this simple and gentle method show antimicrobial and wound healing properties, without the incorporation of antibiotics or any other additives. The physical and mechanical properties of these hydrogel-based dressings were evaluated, as well as their microbiological properties, through in vitro experiments. Results show that dressings with a molar ratio of METAC of 0.5 or higher exhibit high swelling capacity, appropriate water vapor transmission rate values, stability and thermal response, high ductility and adhesiveness. In addition, biological tests showed that the dressings have significant antimicrobial capacity. The best inactivation performance was found for hydrogels synthesized with the highest METAC content. The dressings were tested several times with fresh bacterial cultures, showing a bacterial kill efficiency of 99.99 % even after three repetitions in a row, employing the same dressing, demonstrating the intrinsic bactericidal property of the materials and their reusability. In addition, the gels show low hemolytic effect, high dermal biocompatibility and noticeable wound healing effects. Overall results demonstrate that some specific hydrogel formulations have potential application as dermatological dressings for wound healing and disinfection.

Fast Visible-Light Photopolymerization in the Presence of Multiwalled Carbon Nanotubes: Toward 3D Printing Conducting Nanocomposites

A new photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine, and multiwalled carbon nanobutes (MWCNTs) is presented for visible-light-induced photopolymerization of acrylic monomers. Using this PIS, photopolymerization of acrylamide and other acrylic monomers was quantitative in seconds. The intervention mechanism of CNTs in the PIS was studied deeply, proposing a surface interaction of MWCNTs with Rf which favors the radical generation and the initiation step. As a result, polyacrylamide/MWCNT hydrogel nanocomposites could be obtained with varying amounts of CNTs showing excellent mechanical, thermal, and electrical properties. The presence of the MWCNTs negatively influences the swelling properties of the hydrogel but significantly improves its mechanical properties (Young modulus values) and electric conductivity. The new PIS was tested for 3D printing in a LCD 3D printer. Due to the fast polymerizations, 3D-printed objects based on the conductive polyacrylamide/CNT nanocomposites could be manufactured in minutes.

High-Performance UV-Vis Light Induces Radical Photopolymerization Using Novel 2-Aminobenzothiazole-Based Photosensitizers

The popularity of using the photopolymerization reactions in various areas of science and technique is constantly gaining importance. Light-induced photopolymerization is the basic process for the production of various polymeric materials. The key role in the polymerization reaction is the photoinitiator. The huge demand for radical and cationic initiators results from the dynamic development of the medical sector, and the optoelectronic, paints, coatings, varnishes and adhesives industries. For this reason, we dealt with the subject of designing new, highly-efficient radical photoinitiators. This paper describes novel photoinitiating systems operating in UV-Vis light for radical polymerization of acrylates. The proposed photoinitiators are composed of squaraine (SQ) as a light absorber and various diphenyliodonium (Iod) salts as co-initiators. The kinetic parameters of radical polymerization of trimethylolpropane triacrylate (TMPTA), such as the degree of double bonds conversion (C%), the rate of photopolymerization (Rp), as well as the photoinitiation index (Ip) were calculated. It was found that 2-aminobenzothiazole derivatives in the presence of iodonium salts effectively initiated the polymerization of TMPTA. The rates of polymerization were at about 2 × 10-2 s-1 and the degree of conversion of acrylate groups from 10% to 36% were observed. The values of the photoinitiating indexes for the most optimal initiator concentration, i.e., 5 × 10-3 M were in the range from 1 × 10-3 s-2 even to above 9 × 10-3 s-2. The photoinitiating efficiency of new radical initiators depends on the concentration and chemical structure of used photoinitiator. The role of squaraine-based photoinitiating systems as effective dyeing photoinitiators for radical polymerization is highlighted in this article.