Structural relaxation and dielectric response of PVDF/PMMA blend in the presence of graphene oxide

Thermal behavior of the dielectric response of composites based on poly(vinylidene fluoride) filled with two-dimensional V2CTx MXenes

In this study, two-dimensional V2CTx MXenes were prepared by an accessible and rapid method, which involved aluminothermic combustion synthesis of the V2AlC MAX phase and its further processing in an HCl/LiF mixture under hydrothermal conditions. The resulting V2CTx MXene was characterised by XRD, SEM, TEM and XANES. A colloidal solution of the V2CTx MXene in dimethylformamide was used to prepare nanocomposites based on a poly(vinylidene fluoride) polymer matrix with a conductive filler content of 2.5 to 20 wt%. The nanocomposites were characterised by XRD, SEM and simultaneous DSC-TG analysis. The dielectric properties of the nanocomposites were studied using impedance spectroscopy in the frequency range from 100 Hz to 1 MHz at temperatures from -50 to +140 °C. The results showed that adding 20 wt% V2CTx to PVDF allows increasing the permittivity to 425.3 with a dielectric loss tangent of 0.54 at a frequency of 10 kHz. Studies of the temperature behavior of the dielectric response of composites have shown that the nature of the temperature dependence of the permittivity and dielectric loss tangent was determined mainly by the characteristics of the PVDF polymer matrix, while the filler had a significant effect only on the interfacial polarization, which increased with increasing V2CTx filler concentration and temperature.

One-pot synthesis of hexafluorobutyl acrylate hyperbranched copolymer for graphene/poly(vinylidenefluoride-trifluoroethylene- chlorofluoroethylene) dielectric composite

Dielectric polymer film capacitor is rapidly emerging as next-generation energy storage for advanced engineering applications because of its lightweight, low cost, and processability. Further increasing energy density of polymer film with high charge-discharge efficiency is prevalent research spotlight. The filler/polymer composite with compatible interface is proved as an effective strategy to improve the energy storage capability of dielectric film. In this work, we designed hyperbranched hexafluorobutyl acrylate copolymer as miscible interface in graphene/fluoropolymer dielectric composite. A facile one-pot method was adopted to synthesize hyperbranched polyethylene grafted hexafluorobutyl acrylate (HBPE-g-HFBA) copolymer, which was adsorbed on surface of nanosheets by non-covalent interaction during exfoliation of natural graphite. The graphene/poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)) composite was prepared by solution casting. The interfacial polarization is enhanced with the improved compatibility of composite that is due to the chemical similarity between hexafluorobutyl acrylate segments and fluoropolymer matrix. The energy density of 0.1 wt% nanocomposite achieves 5.0 J cm^-3with charge-discharge efficiency of 78.1% at 250 MV m^-1. This work provides an optional route for non-covalent functionalization of graphene and the development of flexible polymer film capacitor with large energy storage capability.