Laser-based diagnostics in the gas-phase synthesis of inorganic nanoparticles

Spatially resolved measurement of the distribution of solid and liquid Si nanoparticles in plasma synthesis through line-of-sight extinction spectroscopy

In many high-temperature gas-phase nanoparticle synthesis processes, freshly nucleated particles are liquid and solidify during growth and cooling. This study presents an approach to determine the location of the liquid-to-solid phase transition and the volume fraction and number density of particles of both phases within a gas phase reactor. Spectrally-resolved line-of-sight attenuation (LOSA) measurements are applied to a silicon nanoparticle aerosol generated from monosilane in a microwave plasma reactor. A phantom-based analysis using particle number density, particle size, and temperature distribution from direct numerical simulation (DNS) of the reacting flow indicates that the contributions from the two particle phases can be decoupled under practical conditions, even with noisy data. The approach was applied to analyze spatially and spectrally resolved LOSA measurements from the hot gas flow downstream of the plasma zone where both solid and liquid silicon particles coexist. Extinction spectra were recorded along a line perpendicular to the flow direction by a spectrometer with an electron-multiplying charge-coupled device (EMCCD) camera, and two-dimensional projections were deconvolved to obtain radial extinction coefficient distributions of solid and liquid particles across the cross-section of the flow. Particle number densities of both particle phases were retrieved simultaneously based on the size-dependent extinction cross-sections of the nanoparticles. The particle-size distribution was determined via thermophoretic sampling at the same location with subsequent transmission electron microscopy (TEM) analysis. The particle temperature distribution was determined from the particle's thermal radiation based on line-of-sight emission (LOSE) measurements. The approach for phase-selective data analysis can be transferred to other materials aerosol systems as long as significant differences exist in extinction spectra for the related different particle classes.

Molecular Emissions from Stretched Excitation Pulse in Nanosecond Phase-Selective Laser-Induced Breakdown Spectroscopy of TiO2 Nanoaerosols

In phase-selective laser-induced breakdown spectroscopy (PS-LIBS), gas-borne nanoparticles are irradiated with laser pulses (∼2.4 GW/cm²) resulting in breakdown of the nanoparticle phase but not the surrounding gas phase. In this work, the effect of excitation laser-pulse duration and energy on the intensity and duration of TiO₂-nanoparticle PS-LIBS emission signal is investigated. Laser pulses from a frequency-doubled neodymium-doped yttrium aluminum garnet (Nd:YAG) laser (532 nm) are stretched from 8 ns (full width at half maximum, FWHM) up to ∼30 ns at fixed pulse energy using combinations of two optical cavities. The intensity of the titanium atomic emissions at around 500 nm wavelength increases by ∼60%, with the stretched pulse and emissions at around 482 nm, attributed to TiO, enhanced over 10 times. While the atomic emissions rise with the stretched laser pulse and decay around 20 ns after the end of the laser pulse, the TiO emissions reach their peak intensity at about 20 ns later and last longer. At low laser energy (i.e., 1 mJ/pulse, or 80 MW/cm²), the TiO emissions dominate, but their increase with laser energy is lower compared to the atomic emissions. The origin of the 482 nm emission is explored by examining several different aerosol setups, including Ti-O, Ti-N, and Ti-O-N from a spark particle generator and Ti-O-N-C-H aerosol from flame synthesis. The 482 nm emissions are attributed to electronically excited TiO, likely resulting from the reaction of excited titanium atoms with surrounding oxidizing (carbonaceous and/or radical) species. The effects of pulse length are attributed to the shift of absorption from the initial interaction with the particle to the prolonged interaction with the plasma through inverse bremsstrahlung.

Investigating spray flames for nanoparticle synthesis via tomographic imaging using multi-simultaneous measurements (TIMes) of emission

Tomographic imaging using multi-simultaneous measurements (TIMes) of spontaneous light emission was performed on various operating conditions of the SpraySyn burner to analyse the flame morphology and its potential impact on spray flame pyrolysis. Concurrent instantaneous and time-averaged three-dimensional measurements of CH* chemiluminescence (flame front indicator) and atomic Na emission from NaCl dissolved in the injected combustible liquid (related to hot burnt products of the spray flame) were reconstructed employing a 29-camera setup. Overlapping regions of CH* and Na are presented using isosurface visualisation, local correlation coefficient fields and joint probability distributions. The instantaneous results reveal the complex nature of the reacting flow and regions of interaction between the flame front with the hot gases that originate from the spray stream. The averaged reconstructions show that the spray flames tested are slightly asymmetric near the burner exit but develop into symmetric bell-shaped distributions at downstream locations. The changes in the flame structure for different operating conditions are analysed in light of previous studies, helping in the better understanding of the nanoparticle synthesis process. Furthermore, the importance of using measurements from two views for significantly improved alignment of the burner based on the originally proposed procedure are discussed in light of the reconstructions. This is an important aspect since the SpraySyn is intended for use as a well-defined standardised burner for nanoparticle synthesis, which is being investigated numerically and experimentally across different research groups.

Laser-induced incandescence for non-soot nanoparticles: recent trends and current challenges

Laser-induced incandescence (LII) is a widely used combustion diagnostic for in situ measurements of soot primary particle sizes and volume fractions in flames, exhaust gases, and the atmosphere. Increasingly, however, it is applied to characterize engineered nanomaterials, driven by the increasing industrial relevance of these materials and the fundamental scientific insights that may be obtained from these measurements. This review describes the state of the art as well as open research challenges and new opportunities that arise from LII measurements on non-soot nanoparticles. An overview of the basic LII model, along with statistical techniques for inferring quantities-of-interest and associated uncertainties is provided, with a review of the application of LII to various classes of materials, including elemental particles, oxide and nitride materials, and non-soot carbonaceous materials, and core-shell particles. The paper concludes with a discussion of combined and complementary diagnostics, and an outlook of future research.

Laser-induced incandescence for non-soot nanoparticles: recent trends and current challenges

Laser-induced incandescence (LII) is a widely used combustion diagnostic for in situ measurements of soot primary particle sizes and volume fractions in flames, exhaust gases, and the atmosphere. Increasingly, however, it is applied to characterize engineered nanomaterials, driven by the increasing industrial relevance of these materials and the fundamental scientific insights that may be obtained from these measurements. This review describes the state of the art as well as open research challenges and new opportunities that arise from LII measurements on non-soot nanoparticles. An overview of the basic LII model, along with statistical techniques for inferring quantities-of-interest and associated uncertainties is provided, with a review of the application of LII to various classes of materials, including elemental particles, oxide and nitride materials, and non-soot carbonaceous materials, and core-shell particles. The paper concludes with a discussion of combined and complementary diagnostics, and an outlook of future research.

Laser-induced incandescence for non-soot nanoparticles: recent trends and current challenges

Laser-induced incandescence (LII) is a widely used combustion diagnostic for in situ measurements of soot primary particle sizes and volume fractions in flames, exhaust gases, and the atmosphere. Increasingly, however, it is applied to characterize engineered nanomaterials, driven by the increasing industrial relevance of these materials and the fundamental scientific insights that may be obtained from these measurements. This review describes the state of the art as well as open research challenges and new opportunities that arise from LII measurements on non-soot nanoparticles. An overview of the basic LII model, along with statistical techniques for inferring quantities-of-interest and associated uncertainties is provided, with a review of the application of LII to various classes of materials, including elemental particles, oxide and nitride materials, and non-soot carbonaceous materials, and core-shell particles. The paper concludes with a discussion of combined and complementary diagnostics, and an outlook of future research.

Modification of Aerosol Gold Nanoparticles by Nanosecond Pulsed-Periodic Laser Radiation

This study investigates the processes of interaction of nanosecond pulsed-periodic laser radiation with the flow of aerosol agglomerates of gold nanoparticles synthesized in a spark discharge. Nanoparticles in a gas flow are spatially separated nano-objects whose interaction with each other and with the walls of an experimental cell was insignificant. Therefore, the energy absorbed by nanoparticles was used only for their own heating with further shape and size modification and on heat transfer to the surrounding gas. In the research, we used laser radiation with wavelengths of 527 and 1053 nm at pulse energies up to 900 µJ and pulse repetition rates up to 500 Hz. The dynamics of changes in the nanoparticles size during their sintering process depending on the laser pulses energy is characterized by an S-shaped shrinkage curve. Complete sintering of the initial agglomerates with their transformation into spherical nanoparticles is achieved by a series of impacting laser pulses. The result of nanoparticles’ laser modification is largely determined by the pulse energy and the efficiency of the nanoparticles’ radiation absorption.

Phase-sensitive detection of gas-borne Si nanoparticles via line-of-sight UV/VIS attenuation

The distinct optical properties of solid and liquid silicon nanoparticles are exploited to determine the distribution of gas-borne solid and liquid particles in situ using line-of-sight attenuation measurements carried out across a microwave plasma reactor operated at 100 mbar. The ratio between liquid and solid particles detected downstream of the plasma varied with measurement location, microwave power, and flow rate. Temperatures of the liquid particles were pyrometrically-inferred using a spectroscopic model based on Drude theory. The phase-sensitive measurement supports the understanding of nanoparticle formation and interaction and thus the overall gas-phase synthesis process.

Phase-sensitive detection of gas-borne Si nanoparticles via line-of-sight UV/VIS attenuation

The distinct optical properties of solid and liquid silicon nanoparticles are exploited to determine the distribution of gas-borne solid and liquid particles in situ using line-of-sight attenuation measurements carried out across a microwave plasma reactor operated at 100 mbar. The ratio between liquid and solid particles detected downstream of the plasma varied with measurement location, microwave power, and flow rate. Temperatures of the liquid particles were pyrometrically-inferred using a spectroscopic model based on Drude theory. The phase-sensitive measurement supports the understanding of nanoparticle formation and interaction and thus the overall gas-phase synthesis process.

Characterization of tracers for two-color laser-induced fluorescence thermometry of liquid-phase temperature in ethanol, 2-ethylhexanoic-acid/ethanol mixtures, 1-butanol, and o-xylene

The fluorescence spectra of dye solutions change their spectral signature with temperature. This effect is frequently used for temperature imaging in liquids and sprays based on two-color laser-induced fluorescence (2cLIF) measurements by simultaneously detecting the fluorescence intensity in two separate wavelength channels resulting in a temperature-sensitive ratio. In this work, we recorded temperature-dependent absorption and fluorescence spectra of solutions of five laser dyes (coumarin 152, coumarin 153, rhodamine B, pyrromethene 597, and DCM) dissolved in ethanol, a 35/65 vol.% mixture of ethanol/2-ethylhexanoic acid, ethanol/hexamethylsiloxane, o-xylene, and 1-butanol to investigate their potential as temperature tracers in evaporating and burning sprays. The dissolved tracers were excited at either 266, 355, and 532 nm (depending on the tracer) for temperatures between 296 and 393 K (depending on the solvent) and for concentrations ranging between 0.1 and 10 mg/l. Absorption and fluorescence spectra of the tracers were investigated for their temperature dependence, the magnitude of signal re-absorption, the impact of different solvents, and varying two-component solvent compositions. Based on the measured fluorescence spectra, the tracers were analyzed for their 2cLIF temperature sensitivity in the respective solvents. Coumarin 152 showed for single-component solvents the overall best spectroscopic properties for our specific measurement situation related to temperature imaging measurements in spray-flame synthesis of nanoparticles as demonstrated previously in ethanol spray flames [Exp. Fluids61, 77 (2020)10.1007/s00348-020-2909-9].