On mechanical activation of glauconite: Physicochemical changes, alterations in cation exchange capacity and mechanisms

Magnetic hybrid spheres of glauconite/calcium alginate interface for methylene blue adsorption: Synthesis, characterization, and novel physicochemical insights through theoretical treatment

Fe3O4 nanoparticles were embedded within a glauconite‑calcium alginate (G/CA) matrix to create magnetic hybrid spheres (MNPs-G/CA), with the aim of purifying water from methylene blue (MB) at temperatures of 25, 40, and 50 °C. MNPs-G/CA adsorbent was characterized using numerous techniques, including elemental mapping, zeta potential, FTIR, FESEM, XRD, EDX, and TEM. The greatest amount of the removed MB was achieved under definite conditions of solution pH 8.0, MNPs-G/CA mass (25 mg), interaction time (2 h), and 200 mg/L of MB concentration. The MB uptake process kinetic followed a pseudo-second-order equation (R2 > 0.99) at all tested temperatures. The equilibrium data were fitted to a statistical physics multilayer model in conjunction with the Langmuir and Freundlich equations. The steric n parameter reveals that MNPs-G/CA adsorbent possesses a mixed adsorption orientation (i.e., ranging from 0.69 to 0.93) across various temperatures. The amount of MNPs-G/CA active positions (the NM parameter) was progressively increased from 245 mg/g to 419 mg/g. The measured adsorption capacities (Qsat) ranged from 466.49 to 664.37 mg/g, and the removal of MB molecules was consistent with an endothermic interaction. The interface between the MNPs-G/CA-MB was principally dictated by electrostatic attractions, as evidenced by the values of adsorption energies (∆E), which varied from 16.75 to 21.52 kJ/mol. The regenerated MNPs-G/CA offered over 80 % of its adsorption strength after the fourth adsorption-desorption cycle. This study contributes to our understanding of the physicochemical parameters controlling the MB adsorption mechanism on multifunctional hybrid adsorbents, like the interface between glauconite, alginate, and MNPs.

Enhanced remediation of U(vi) ions from water resources using advanced forms of morphologically modified glauconite (nano-sheets and nano-rods): experimental and theoretical investigations

Two forms of morphologically transformed glauconite (GL) involved exfoliated nanosheets (EXG) and nanorods (GRs), which were synthesized by facile exfoliating and scrolling modification under sonication. The two advanced forms (EXG and GRs) were applied as enhanced adsorbents for U(vi) ions and compared with using raw glauconite. The developed GRs structure displays higher saturation retention properties (319.5 mg g-1) in comparison with both EXG (264.8 mg g-1) and GL (237.9 mg g-1). This enhancement is assigned to the noticeable increment in the surface area (32.6 m2 g-1 (GL), 86.4 m2 g-1 (EXG), and 123.7 m2 g-1 (GRs)) in addition to the surface reactivity and exposure of effective siloxane groups. This was supported by the steric investigation based on the isotherm basics of the monolayer model of one energy site. The steric functions declared a strong increase in the density of the existing effective uptake receptors throughout the modification stages (GRs (112.1 mg g-1) > EXG (87.7 mg g-1) > 72.5 mg g-1 (GL)). Also, each active site can be filled with 4 U(vi) ions, donating the parallel orientation of these ions and the operation of multi-ionic mechanisms. The energetic functions, either the uptake energy (<13 kJ mol-1) or Gaussian energy (<5 kJ mol-1), validate the retention of U(vi) by physical reactions. These reactions displayed spontaneous properties and exothermic behaviors based on the investigated thermodynamic functions, including entropy, enthalpy, and internal energy. The structures also showed significant recyclability, indicating potential application on a realistic and commercial scale.

Synthesis and Characterization of Iron-Rich Glauconite Nanorods by a Facile Sonochemical Method for Instantaneous and Eco-friendly Elimination of Malachite Green Dye from Aquatic Environments

Novel glauconite nanorods (GNRs) were synthesized by the sonication-induced chemical expansion and scrolling process of natural glauconite. The synthetic nanostructure was characterized by different analytical techniques as a superior adsorbent for the malachite green dye (MG). The synthetic GNRs were detected as porous nanorods with an average length of 150 nm to 5 μm, an average diameter of 25 to 200 nm, and a specific surface area of 123.7 m2/g. As an adsorbent for MG, the synthetic GNRs showed superior uptake capacity up to 1265.6 mg/g at the saturation stage, which is higher than most of the recently developed highly adsorbent dyes. The adsorption behavior and mechanistic properties were depicted by using modern and traditional equilibrium modeling. The kinetic assumption of the pseudo-first-order model (R2 > 0.94) and the classic isotherm of the Langmuir equilibrium model (R2 > 0.97) were used to describe the adsorption reactions. The steric investigation demonstrates that each active site on the surface of GNRs can adsorb up to three MG molecules (n = 2.19-2.48) in vertical orientation involving multimolecular mechanisms. Also, the determined active site density (577.89 mg/g) demonstrates the enrichment of the surface of GNRs with numerous adsorption receptors with strong affinity for the MG dye. The energetic study, including Gaussian energy (6.27-7.97 kJ/mol) and adsorption energy (9.45-10.43 kJ/mol), revealed that GNRs had physically adsorbed the dye, which might involve electrostatic attraction, hydrogen bonding, van der Waals forces, and dipole forces. The internal energy, enthalpy, and entropy determined the exothermic and spontaneous uptake of MG.

Mechanical Activation of Smectite-Based Nanocomposites for Creation of Smart Fertilizers

This research presents the mechanical creation of smart fertilizers from a mixture of smectite and urea in a 3:2 ratio by using the planetary milling technique. The smectite–urea composites show intercalation between urea and mineral, which increases steadily with increasing activation time. A shift of X-Ray Diffraction basal reflections, intensities of Fourier transform infrared spectroscopy (FTIR) peaks, and weight losses in thermogravimetric analysis (TG) document the systematic crystallo-chemical changes of the composites related to nitrogen interaction with activation. Observations of the nanocomposites by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) corroborate the inference. Nitrogen intercalates with smectite in the interlayer space and remains absorbed either within micro-aggregates or on the surface of activated smectites. Soil leaching tests reveal a slower rate of nitrogen than that of traditional urea fertilizers. Different forms of nitrogen within the composites cause their differential release rates to the soil. The formulated nanocomposite fertilizer enhances the quality and quantity of oat yield.

Influence of Zwitterionic CAPB on Flocculation of the Aqueous Cationic Guar Gum/Glauconite Suspensions at Various pH

The influence of the pseudoamphoteric zwitterionic surfactant cocamidopropylbetaine (CAPB) on the stabilizing flocculating properties of the aqueous suspensions of glauconite (GT) with cationic guar gum (CGG) at various pH values was investigated. The following techniques were used: turbidimetry, UV-VIS spectrophotometry, tensiometry, electrophoretic mobility measurements, SEM, CHN, XRD, and FT-IR. It was established that CGG is an effective glauconite flocculant. Moreover, the most probable mechanism that is responsible for flocculation is bridge flocculation resulting from polymer adsorption on the glauconite surface. The adsorption process is caused by electrostatic interactions between the negatively charged glauconite surface and the positively charged polymer. The amount of CGG adsorption increases with the increase of the pH, which was confirmed by the adsorption and zeta potential measurements. The addition of CAPB increases the amount of the polymer adsorption due to the formation of intermolecular polymer–surfactant complexes; however, it reduces flocculation effectiveness.

Tribochemistry, Mechanical Alloying, Mechanochemistry: What is in a Name?

Over the decades, the application of mechanical force to influence chemical reactions has been called by various names: mechanochemistry, tribochemistry, mechanical alloying, to name but a few. The evolution of these terms has largely mirrored the understanding of the field. But what is meant by these terms, why have they evolved, and does it really matter how a process is called? Which parameters should be defined to describe unambiguously the experimental conditions such that others can reproduce the results, or to allow a meaningful comparison between processes explored under different conditions? Can the information on the process be encoded in a clear, concise, and self-explanatory way? We address these questions in this Opinion contribution, which we hope will spark timely and constructive discussion across the international mechanochemical community.

Glauconite clay-functionalized chitosan nanocomposites for efficient adsorptive removal of fluoride ions from polluted aqueous solutions

We herein have developed a mild approach for the fabrication of glauconite clay (G)-modified chitosan (CS) nanocomposites by the combination of a simple blending and crosslinking method. The chitosan was modified with ethylenediaminetetraacetic acid (EDTA), glutaraldehyde (GL), sodium dodecyl sulfate (SDS), and cetyltrimethyl ammonium bromide (CTAB). The as-prepared composites were identified using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), nitrogen physical adsorption (BET), atomic absorption spectrophotometry (AA), and thermal gravimetric analysis (TGA). The adsorption activities of the as-prepared materials were assessed for the removal of fluoride ions from aqueous media using a batch technique. Raw glauconite (G), GL-CS/G, SDS-CS/G, EDTA-GL-CS/G, and CTAB-CS/G adsorbents displayed maximum adsorption capacity values of 1.15, 4.31, 4.55, 6.90, and 9.03 mg g⁻¹, respectively. The adsorption results were well described by employing the pseudo-second-order kinetic and Langmuir isotherm models. The estimated thermodynamic constants indicated that the F⁻ ion adsorption was a spontaneous, physisorption process. Furthermore, the modified chitosan adsorbents are good candidates for the adsorptive elimination of F⁻ ions from aqueous solutions, according to their reusability, high stability, good adsorption capacity, and applicability for actual field water samples.

We herein have developed a mild approach for the fabrication of glauconite clay (G)-modified chitosan (CS) nanocomposites by the combination of a simple blending and crosslinking method.