Effects of process parameters of rotary tablet press on die filling behavior during mini-tablet production: Comparison with conventional tablet

An experimental study on flow behaviour of pharmaceutical powders during suction filling

Die filling is a crucial step in the pharmaceutical tablet manufacturing process. For industrial-scale production using rotary presses, suction filling is typically employed due to its significant efficiency advantages over gravity filling. Despite its widespread use, our understanding of the suction filling process remains limited. Specifically, there is insufficient comprehension of how filling performance is influenced by factors such as suction velocity, filling velocity, and the properties of the powder materials. Building on our previous research, this study aims to further investigate the effects of powder properties and process parameters (e.g., filling velocity, suction velocity, fill depth) on suction filling behaviour. A systematic experimental investigation was conducted using a model suction filling system, considering both cohesive and free-flowing pharmaceutical powders. The effect of fill depth on suction filling of these powders was examined at different filling and suction velocities. The results demonstrate that two distinctive flow regimes for suction filling can be identified: slow filling and fast filling. These regimes are delineated by a critical filling-to-suction velocity ratio. In the slow filling regime, the filling-to-suction velocity ratio is lower than the critical ratio, meaning that the filling phase is slower than the suction phase. Conversely, the fast filling regime occurs when the filling-to-suction velocity ratio exceeds the critical ratio, implying that the filling phase is faster than the suction phase. This study reveals, for the first time, that when the powder flow pattern during suction filling is dominated by plug flow, full die fill (i.e., the fill ratio equals unity) is achieved in the slow filling regime. However, in the fast filling regime, incomplete die fill is obtained. It is also found that when plug flow prevails during fast filling, the fill ratio has an inverse correlation with the filling-to-suction velocity ratio. This study further reveals that when the plug flow assumption is valid, the filling ratio at various fill-to-suction velocity ratios can be well predicted mathematically. Furthermore, it is also found that once the powder flow pattern differs from the ideal plug flow, which could be induced by the filling conditions and powder cohesion, the fill ratio can be overpredicted.

Improving the Manufacturability of Cohesive and Poorly Compactable API for Direct Compression of Mini-tablets at High Drug Loading via Particle Engineering

PURPOSE

To utilize a particle engineering strategy to improve the manufacturability of a cohesive and poorly compactable API at high drug loading for direct compression of mini-tablets.

METHODS

A high-shear mixer was used for wet milling during the API manufacturing process to obtain target particle size distributions. The targeted particles were characterized and formulated into blends by mixing with excipients. The formulated blends were compressed directly into mini-tablets using a compaction simulator. The tablet hardness, weight variation, and friability of the mini-tablets were characterized and compared with mini-tablets prepared with hammer milled APIs.

RESULTS

Compared to the hammer milled APIs, the wet milled APIs, had smoother surface, narrower particle size distributions and demonstrated a better flow properties. Moreover, the mini-tablets produced with the wet milled APIs exhibited better weight uniformity, robust tablet mechanical strength and ultimately better friability. In addition, unlike the hammer milled process, the wet milling process is controllable and easy to scale up.

CONCLUSIONS

This study successfully implemented API particle engineering through a high shear wet milling process to produce particles suitable for robust drug product manufacturing.

Effects of Manufacturing Process Variables on the Tablet Weight Variation of Mini-tablets Clarified by a Definitive Screening Design

This study investigated the effect of manufacturing process variables of mini-tablets, in particular, the effect of process variables concerning fluidized bed granulation on tablet weight variation. Test granules were produced with different granulation conditions according to a definitive screening design (DSD). The five evaluated factors assigned to DSD were: the grinding speed of the sample mill at the grinding process of the active pharmaceutical ingredient (X1), microcrystalline cellulose content in granules (X2), inlet air temperature (X3), binder concentration (X4) and the spray speed of the binder solution (X5) at the granulation process. First, the relationships between the evaluated factors and the granule properties were investigated. As a result of the DSD analysis, the mode of action of granulation parameters on the granule properties was fully characterized. Subsequently, the variation in tablet weight was examined. In addition to mini-tablets (3 mm diameter), this experiment assessed regular tablets (8 mm diameter). From the results for regular tablets, the variation in tablet weight was affected by the flowability of granules. By contrast, regarding the mini-tablets, no significant effect on the variation of tablet weight was found from the evaluated factors. From this result, this study further focused on other important factors besides the granulation process, and then the effect of the die-hole position of the multiple-tip tooling on tablet weight variation was proven to be significant. Our findings provide a better understanding of manufacturing mini-tablets.

Evaluation of Weight Variation in Mini-Tablets Manufactured by a Multiple-Tip Tool

Recently, owing to their pharmaceutical and clinical utility, mini-tablets have been well studied by researchers. Mini-tablets are usually manufactured by compression molding using a multiple-tip tool in a rotary tableting machine. Owing to their special structure, ensuring uniformity is a very important challenge in the manufacturability of mini-tablets using the multiple-tip tool. In this study, we aimed to evaluate the weight variation in mini-tablets produced by a multiple-tip tool, which is considered to be the root cause affecting the uniformity, and to investigate the physical properties of drug granules and tableting conditions in a rotary tableting machine that could reduce this weight variation. In addition, the relationship between these factors and response was visualized using response surface analysis. It was shown that the weight variation in mini-tablets produced by a multiple-tip tool was reduced when using a forced feeder compared with an open feeder. Furthermore, in the case of an open feeder, the optimal range of the average particle size diameter of drug granules and the rotational speed of the rotating disc in the rotary tableting machine were determined from response surface analysis. It was suggested that it is possible to reduce the weight variation in the mini-tablets by selecting drug granules with an average particle size diameter of 100-150 µm and using tableting conditions with a rotational speed of 40-60 rpm. This study elucidated the factors that affect uniformity and determined their optimal range for the manufacture of mini-tablets.