An integrated model of predicting sand erosion in elbows for multiphase flows

Numerical Simulation of Gas-Solid Two-Phase Erosion for Elbow and Tee Pipe in Gas Field

Erosion caused by solid particles in a pipeline is one of the main problems endangering the safety production of the oil and gas industry, which may lead the equipment to malfunction or even fail. However, most of the previous studies focused on the standard elbow, and the erosion law of right-angle elbow and blind tee is rarely reported in the literature. This work aims to investigate the erosion law of different pipeline structures including 90° elbow, right-angle pipe, and tee pipe based on the production characteristics and engineering parameters of the gas field. An integrated CFD-DPM method is established including a realizable k-ε turbulence model, discrete phase model, and erosion rate prediction model. The accuracy of the model is evaluated by a series of experimental data of flow conditions of our previous work. Further, the erosion rate, pressure distributions, and particle trajectories in 90° elbow, right-angle pipe, and tee pipe under different flow velocities, particle mass flow rate, pipe diameter are investigated by applying the presented model. The results show that the blind tee has the most obvious growth rate, and the most serious erosion is located in the blind end of the pipe wall. The maximum erosion rate of the 1.5D is greater than that of the 3D elbow as a whole, and the 1.5D elbow is more concentrated in the serious erosion area. Furthermore, the erosion rate of the bend weld is much greater than that of the straight pipe weld. This study can provide a basis for the selection of different structural pipe fittings, thereby reducing the pipeline erosion rate and improving the integrity of the management of gas pipelines.

Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90° Elbow Pipe in Slug Flow

Erosion-corrosion of elbow configurations has recently been a momentous concern in hydrocarbon processing and transportation industries. The carbon steel 90° elbows are susceptible to the erosion-corrosion during the multiphase flow, peculiarly for erosive slug flows. This paper studies the erosion-corrosion performance of 90° elbows at slug flow conditions for impact with 2, 5, and 10 wt.% sand fines concentrations on AISI 1018 carbon steel exploiting quantitative and qualitative analyses. The worn surface analyses were effectuated by using laser confocal and scanning electron microscopy. The experiment was conducted under air and water slug flow containing sand fines of 50 µm average size circulated in the closed flow loop. The results manifest that with the increase of concentration level, the erosion-corrosion magnitude increases remarkably. Sand fines instigate the development of perforation sites in the form of circular, elongated, and coalescence pits at the elbow downstream and the corrosion attack is much more obvious with the increase of sand fines concentration. Another congruent finding is that cutting and pitting corrosion as the primitive causes of material degradation, the 10 wt.% sand fines concentration in carrier phase increases the erosion-corrosion rate of carbon steel up to 93% relative to the 2 wt.% sand fines concentration in slug flow.