Kinetics and mechanism analysis of CO2 adsorption on LiX@ZIF-8 with core shell structure

Adsorption properties of M-UiO-66 (M = Zr(IV); Hf(IV) or Ce(IV)) with BDC or PDC linker

The increasing CO2 emissions and their direct impact on climate change due to the greenhouse effect are environmental issues that must be solved as soon as possible. Metal-organic frameworks (MOFs) are one class of crystalline adsorbent materials that are thought to have enormous potential in CO2 capture applications. In this research, the effect of changing the metal center between Zr(IV), Ce(IV), and Hf(IV), and the linker between BDC and PDC has been fully studied. Thus, the six UiO-66 isoreticular derivatives have been synthesized and characterized by FTIR, PXRD, TGA, and N2 adsorption. We also report the BET surface area, CO2 adsorption capacities, kinetics, and the adsorption isosteric heat (Qst) of the UiO-66 derivatives mentioned family. The CO2 adsorption kinetics were evaluated using pseudo-first order, pseudo-second order, Avrami's kinetic models, and the rate-limiting step with Boyd's film diffusion, interparticle diffusion, and intraparticle diffusion models. The isosteric heats of CO2 adsorption using various MOFs are in the range 20-65 kJ mol-1 observing differences in adsorption capacities between 1.15 and 4.72 mmol g-1 at different temperatures due to the electrostatic interactions between CO2 and extra-framework metal ions. The isosteric heat of adsorption calculation in this report, which accounts for the unexpectedly high heat released from Zr-UiO-66-PDC, is finally represented as an increase in the interaction of CO2 with the PDC linker and an increase in Qst with defects.

Effects of Particle Size on the Gas Uptake Kinetics and Physical Properties of Type III Porous Liquids

Type III porous liquids (PLs) consist of porous solid particles dispersed in a size-excluded liquid phase and are attracting much attention as novel media for applications such as gas separation. However, the effects of fundamental variables such as particle size on their physical properties are currently largely unknown. Here we study the effects of particle size in a series of porous liquids based on solid Al(OH)(fumarate) (a microporous metal-organic framework, MOF) with particle sizes of 60 nm, 200-600 nm, or 800-1000 dispersed in liquid polydimethylsiloxane (PDMS). Properties examined include physical stability of the dispersion, viscosity, total CO2 uptake, and kinetics of CO2 uptake. As expected, both physical stability and viscosity decreased with increasing particle size. Unexpectedly, total gravimetric gas uptake also varied with particle size, being greatest for the largest particles, which we ascribe to larger particles having a lower relative content of surface-bound FMA ligands. Various models for the gas uptake kinetic data were considered, specifically adsorption reaction models such as pseudo-first-order, pseudo-second-order, and Elovich models. In contrast to pure PDMS, which showed first-order kinetics, all PLs fit best to the Elovich model confirming that their uptake mechanism is more complex than for a simple liquid. Adsorption diffusion models, specifically Weber and Morris' intraparticle model and Boyd's model, were also applied which revealed a three-step process in which a combination of diffusion through a surface layer and intraparticle diffusion were rate-limiting. The rate of gas uptake follows the order PDMS < PL1 < PL2 < PL3, showing that the porous liquids take up gas more rapidly than does PDMS and that this rate increases with particle size. Overall, the study suggests that for high gas uptake and fast uptake kinetics, large particles may be preferred. Also, the fact that large particles resulted in low viscosity may be advantageous in reducing the pumping energy needed in flow separation systems. Therefore, the work suggests that finding ways to stabilize PLs with large particles against phase separation could be advantageous for optimizing the properties of PLs toward applications.

Application of montmorillonite/octadecylamine nanoparticles in the removal of textile dye from aqueous solutions: Modeling, kinetic, and equilibrium studies

In the study, the proliferation of industries has been associated with an increase in the production of industrial wastewater and subsequent environmental pollution, wherein dyes emerge as prominent pollutants. The characteristics of nanoclay modified with octadecylamine, were elucidated throughvarious techniques, including Field Emission Scanning Electron Microscopy/Energy Dispersive Spectroscopy (FE-SEM/EDS), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), X-ray Diffraction (XRD), and Brunauer-Emmett-Teller Surface Area Analysis (BET). The research delved into the impact of variables such as pH, initial dye concentration, adsorbent dose, temperature, and ultrasonication time on the removal of Acid Black 1 (AB1) through an ultrasonic process, employing a central composite design (CCD). Optimal conditions for the adsorption process were determined: pH at 5.46, adsorbent mass at 4 mg/30 mL, initial dye concentration at 20 mg/L, ultrasound time at 20 min, and temperature at 50 °C, resulting in a remarkable 96.49% adsorption efficiency. The fitting of experimental equilibrium data to different isotherm models, including Langmuir, Freundlich, and Temkin, indicated thatthe Freundlich model was the most suitable. Analysis of the adsorption data with various kinetic models such as pseudo-first and second-order models, and intraparticle diffusion models, revealed the applicability of the second-order equation model. A thermodynamic study unveiled that the adsorption process was spontaneous and endothermic. In conclusion, the study highlights the significant capability ofmontmorillonite nanoclay modified with octadecylamine in removing AB1 dye, rendering it a viable option for wastewater treatment.

Mechanism and kinetic of piezo-catalytic desulfurization of model and actual fuel samples over CexOy/SrO nanocomposite at room temperature

SOx emissions are primarily caused by compounds containing sulfur in petroleum and fuels, which lead to severe air pollution. For this reason, it is necessary to develop a fast and simple desulfurization method in order to comply with ever-increasing environmental regulations. The newly discovered piezo-catalyst nanocomposite CexOy/SrO can convert mechanical energy directly into chemical energy, thereby enabling mechanically oxidative sulfur desulfurization. 320 W of bath sonication were used to polarize and activate the prepared piezo-catalyst nanocomposite CexOy/SrO for sulfur removal from thiophene and dibenzothiophene as model fuels and kerosene as a real fuel. Using uniform and spherical CeO2/SrO nanocomposites resulted in the highest desulfurization rates of 95.4 %, 97.3 %, and 59.7 %, respectively, for thiophene and dibenzothiophene. This study examined the effect of several parameters, such as sulfur concentration, pH of fuel, dosage of CexOy/SrO nanocomposite, power and time of ultrasonic, and shaking time, on the piezo-desulfurization of thiophene (TP) and dibenzothiophene (DBTP). To identify the major active species in piezo desulfurization, radical trapping experiments were conducted. This study investigated the possibility of reusing the catalyst, and the piezo-desulfurization activity that was demonstrated in the removal of TP and DBTP after 11 cycles as well as the ability of the catalyst to remove real fuel even after 14 cycles was promising. As the kinetic results show, the reaction follows the second order with K = 0.0050. Also, thermodynamic results showed the oxidation of sulfide to sulfoxide and sulfoxide is endothermic. Activation energy for second order rate constant is (3.824 Kj/mole). 0.0236 mol-1. Sec-1 was calculated for Arrhenius Constant.

Preparation of double-system imprinted polymer-coated multi-walled carbon nanotubes and their application in simultaneous determination of thyroid-disrupting chemicals in dust samples

Dust ingestion is a significant route of human exposure to thyroid-disrupting chemicals (TDCs), and simultaneous determination of multi-contaminants is a great challenge for environmental monitoring. In this study, molecularly imprinted polymer-coated multi-walled carbon nanotubes using thyroxine as the template were synthesized for highly selective TDCs capture. This polymer was prepared by integrating the atom transfer radical polymerization using 2-(3-indol-yl)ethylmethacrylamide as the monomer with the self-polymerization of dopamine. Construction of double-system imprinted cavities could significantly improve their selective recognition performance for TDCs and the coincidence rate reached 88.5 %. The prepared polymers were applied as the solid phase extraction adsorbent to simultaneously determine 7 groups of 35 TDCs. The proposed method showed wide linear range (0.25-1000 ng L-1), low limits of detection (0.02-0.23 ng L-1) and acceptable recoveries (81.8 %-103.5 %). The occurrence and distribution of TDCs were then studied in indoor dust samples (n = 65) collected from four cities in China. We found that tetrabromobisphenol A was the predominant compound and perfluorinated compounds were the most abundant TDCs. In addition, the distribution ratio of TDCs varied between regions. This study provides an efficient technology for direct exposure assessment of multi-contaminants.

Facile synthesis of polyethyleneimine-modified cellulose nanocrystal/silica hybrid aerogel for CO2 adsorption

Cellulose nanocrystal (CNC)/silica hybrid aerogel (CSA) was synthesized from CNC and sodium silicate hybridization using the one-step sol-gel method under atmospheric drying. At a weight ratio of CNC to silica of 1:1, the obtained CSA-1 had a highly porous network, a high specific area of 479 m² g^-1, and a CO₂ adsorption capacity of 0.25 mmol g^-1. Then, polyethyleneimine (PEI) was impregnated on CSA-1 to improve CO₂ adsorption performance. The parameters governing CO₂ adsorption performance on CSA-PEI, such as temperatures (70-120 °C) and PEI concentrations (40-60 wt%), were investigated systematically. The optimum adsorbent (CSA-PEI50) exhibited an excellent CO₂ adsorption capacity of 2.35 mmol g^-1 at 70 °C and a PEI concentration of 50 wt%. The adsorption mechanism of CSA-PEI50 was elucidated by analyzing many adsorption kinetic models. The CO₂ adsorption behaviors of CSA-PEI at various temperatures and PEI concentrations had the goodness of fit with the Avrami kinetic model, which can correspond to the multiple adsorption mechanism. The Avrami model also showed fractional reaction orders in a range of 0.352-0.613, and the root mean square error is negligible. Moreover, the rate-limiting kinetic analysis showed that film diffusion and intraparticle diffusion resistance controlled the adsorption speed and dominated the subsequent adsorption stages, respectively. The CSA-PEI50 also exhibited excellent stability after ten adsorption-desorption cycles. This study illustrated that CSA-PEI was a potential adsorbent for CO₂ capture from flue gas.

Studying the mechanism and kinetics of fuel desulfurization using CexOy/NiOx piezo-catalysts as a new low-temperature method

In order to advance desulfurization technology, a new method for excellent oxidative desulfurization of fuel at room temperature will be of paramount importance. As a novel desulfurization method, we developed piezo-catalysts that do not require adding any oxidants and can be performed at room temperature. A microwave method was used to prepare CeO₂/Ce₂O₃/NiO_x nanocomposites. Model and real fuel desulfurization rates were examined as a function of synthesis parameters, such as microwave power and time, and operation conditions, such as pH and ultrasonic power. The results showed that CeO₂/Ce₂O₃/NiO_x nanocomposites demonstrated outstanding piezo-desulfurization at room temperature for both model and real fuels. Furthermore, CeO₂/Ce₂O₃/NiO_x nanocomposites exhibited remarkable reusability, maintaining 79% of their piezo-catalytic activity even after 17 repetitions for desulfurization of real fuel. An investigation of the mechanism of sulfur oxidation revealed that superoxide radicals and holes played a major role. Additionally, the kinetic study revealed that sulfur removal by piezo-catalyst follows a second-order reaction kinetic model.

Kinetic and thermodynamic study in piezo degradation of methylene blue by SbSI/Sb2S3 nanocomposites stimulated by zirconium oxide balls

Mechanical energy harvesting by piezoelectric materials to drive catalysis reactions received extensive attention for environmental remediation. In this work, SbSI/Sb₂S₃ nanocomposites were synthesized as a catalyst. ZrO₂ balls were used as an alternative mechanical force to ultrasonic for stimulating the piezocatalyst for the first time. The kinetics and thermodynamics of the piezo degradation of methylene blue (MB) were studied deeply. Besides the effect of the type of mechanical force, the number of ZrO₂ balls, and temperature of the reaction on the degradation efficiency were studied. Here mechanical energy came from the collision of the ZrO₂ balls with the catalyst particles. Using ZrO₂ balls instead of ultrasonic vibration led to enhance degradation efficiency by 47% at 30 ± 5 °C. A kinetic study revealed that piezo degradation of methylene blue (MB) by SbSI/Sb₂S₃ catalyst followed pseudo-second-order kinetics. Based on thermodynamic results piezo degradation of MB was an exothermic reaction.