Immobilization of starch-converting enzymes on surface-modified carriers using single and co-immobilized systems: properties and application to starch hydrolysis

Optimizing the immobilization conditions of β-galactosidase on UV-cured epoxy-based polymeric film using response surface methodology

UV-cured epoxy-based polymeric film was prepared from glycidyl methacrylate, trimethylolpropane triacrylate, and poly(ethylene glycol) methylether acrylate. 2-hydroxy-2- methylpropiophenone was used as photo initiator. Covalent binding through epoxy groups was employed to immobilize β-galactosidase from Escherichia coli onto this film, and immobilization conditions were optimized by the response surface methodology. ATR-Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) analysis was carried out to characterize the epoxy-based polymeric film. Immobilization yield of β-galactosidase on the material was calculated as 3.57 mg/g and the highest enzyme activity for the immobilized enzyme recorded at pH 6.5°C and 60°C. The immobilized enzyme preserved 51% of its activity at the end of 12 runs. Free and immobilized enzyme hydrolyzed 163.8 and 172.3 µM lactose from 1% lactose, respectively. Kinetic parameters of both free and immobilized β-galactosidase were also investigated, and K_m values were determined to be 0.647 and 0.7263 mM, respectively. PRACTICAL APPLICATIONS: In our study we prepared a UV-cured epoxy-based polymeric film and optimized the immobilization conditions of β-galactosidase from Escherichia coli onto this polymeric film by using response surface methodology (RSM). For this purpose, three-level and three-factor Box-Behnken design, which is an independent, rotatable or nearly rotatable, quadratic design, was applied. Optimal levels of three variables, namely, the amount of enzyme, immobilization time, and pH were determined using Box-Behnken experimental design. Lactose hydrolysis studies were performed from milk and lactose samples using free and immobilized enzyme. In addition, kinetic parameters, storage stability, and re-usability of immobilized β-galactosidase were examined.

Overexpression of amyA and glaA substantially increases glucoamylase activity in Aspergillus niger

The purpose of this study was to obtain an engineered Aspergillus niger strain with high glucoamylase activity by overexpressing the glucoamylase gene glaA and α-amylase gene amyA in A. niger CICC2462. Three recombinant strains containing a single copy of amyA (1A), containing two copies of amyA (2A), and coexpressing amyA and glaA (AG), respectively, were constructed. The transcript levels of amyA in 1A and 2A were increased by 2.95 folds and 3.09 folds, respectively. The levels of amyA and glaA in AG were increased by 1.21 folds and 2.86 folds, but the maximum extracellular glucoamylase activities did not differ significantly. In addition, after 1% casein phosphopeptides (CPPs) was added to the fermentation medium, the maximum extracellular glucoamylase activities for strains 1A, 2A, and AG were 35,200, 37,300, and 40,710 U/ml, respectively, which were significantly higher than that of the parental strain CICC2462 (28,250 U/ml), while CPPs alone had no effect on the parental strain CICC2462. We demonstrate that overexpression of amyA and glaA substantially increases the expression and secretion of glucoamylase in A. niger, and CPPs effectively improves the yield of glucoamylase in recombinant A. niger strains overexpressing amyA and glaA. The newly developed strains and culture methods may have extensive industrial applications.

Bienzyme Magnetic Nanobiocatalyst with Fe3+-Tannic Acid Film for One-Pot Starch Hydrolysis

In this study, a novel co-immobilization biocatalyst for one-pot starch hydrolysis was prepared through shielding enzymes on the Fe₃O₄/SiO₂ core-shell nanospheres by a Fe³⁺-tannic acid (TA) film. In brief, α-amylase and glucoamylase were covalently immobilized on amino-modified Fe₃O₄/SiO₂ core-shell nanospheres using glutarldehyde as a linker. Then, a Fe³⁺-TA protective film was formed through the self-assembly of the Fe³⁺ and TA coordination complex (Fe³⁺-TA@Fe₃O₄/SiO₂-enzymes). The film acts a "coating" to prevent the enzyme from denaturation and detachment, thus significantly improving its structural and operational stability. Furthermore, the immobilization efficiency reached 90%, and the maximum activity recovery of α-amylase and glucoamylase was 87 and 85%, respectively. More importantly, the bienzyme magnetic nanobiocatalyst with Fe³⁺-TA film could be simply recovered by a magnet. The Fe³⁺-TA@Fe₃O₄/SiO₂-enzymes kept 55% of the original activity after reuse for 9 cycles, indicating outstanding reusability. However, the bienzyme magnetic nanobiocatalyst without Fe³⁺-TA film maintained 28% of the initial activity.

An environmentally-friendly enzyme-based nanofibrous membrane for 3,3′,5,5′-tetrabromobisphenol removal

Immobilization of HRP on NCC-incorporated CS/PVA membranes and its application in TBBPA removal.

Carrier free co-immobilization of alpha amylase, glucoamylase and pullulanase as combined cross-linked enzyme aggregates (combi-CLEAs): a tri-enzyme biocatalyst with one pot starch hydrolytic activity

A tri-enzyme biocatalyst "combi-CLEAs" with starch hydrolytic activity was prepared from commercially available alpha amylase, glucoamylase and pullulanase preparations by aggregating enzymes with ammonium sulphate followed by cross-linking formed aggregates for 4.5h with 40 mM glutaraldehyde. The effects of precipitant type and cross-linking were studied and the biocatalyst was characterized. Scanning electron microscopy analysis showed that tri-enzyme biocatalyst was of spherical structure. For one pot starch hydrolytic activity, shift in optimum pH from 6 to 7 and temperature from 65 to 75 °C were observed after co-immobilization of enzymes. After one pot starch hydrolysis reaction in batch mode, 100%, 60% and 40% conversions were obtained with combi-CLEAs, separate CLEAs mixture and free enzyme mixture, respectively. Co-immobilization also enhanced the thermal stability of enzymes. Finally, the catalytic activity of enzymes in combi-CLEAs during one pot starch hydrolysis was well maintained up to five cycles without performance changes.

From protein engineering to immobilization: promising strategies for the upgrade of industrial enzymes

Enzymes found in nature have been exploited in industry due to their inherent catalytic properties in complex chemical processes under mild experimental and environmental conditions. The desired industrial goal is often difficult to achieve using the native form of the enzyme. Recent developments in protein engineering have revolutionized the development of commercially available enzymes into better industrial catalysts. Protein engineering aims at modifying the sequence of a protein, and hence its structure, to create enzymes with improved functional properties such as stability, specific activity, inhibition by reaction products, and selectivity towards non-natural substrates. Soluble enzymes are often immobilized onto solid insoluble supports to be reused in continuous processes and to facilitate the economical recovery of the enzyme after the reaction without any significant loss to its biochemical properties. Immobilization confers considerable stability towards temperature variations and organic solvents. Multipoint and multisubunit covalent attachments of enzymes on appropriately functionalized supports via linkers provide rigidity to the immobilized enzyme structure, ultimately resulting in improved enzyme stability. Protein engineering and immobilization techniques are sequential and compatible approaches for the improvement of enzyme properties. The present review highlights and summarizes various studies that have aimed to improve the biochemical properties of industrially significant enzymes.

Simulation of enzyme catalysis in calcium alginate beads

A general mathematical model for a fixed bed immobilized enzyme reactor was developed to simulate the process of diffusion and reaction inside the biocatalyst particle. The modeling and simulation of starch hydrolysis using immobilized α-amylase were used as a model for this study. Corn starch hydrolysis was carried out at a constant pH of 5.5 and temperature of 50°C. The substrate flow rate was ranging from 0.2 to 5.0 mL/min, substrate initial concentrations 1 to 100 g/L. α-amylase was immobilized on to calcium alginate hydrogel beads of 2 mm average diameter. In this work Michaelis-Menten kinetics have been considered. The effect of substrate flow rate (i.e., residence time) and initial concentration on intraparticle diffusion have been taken into consideration. The performance of the system is found to be affected by the substrate flow rate and initial concentrations. The reaction is controlled by the reaction rate. The model equation was a nonlinear second order differential equation simulated based on the experimental data for steady state condition. The simulation was achieved numerically using FINITE ELEMENTS in MATLAB software package. The simulated results give satisfactory results for substrate and product concentration profiles within the biocatalyst bead.

Affinity covalent immobilization of glucoamylase onto ρ-benzoquinone activated alginate beads: I. Beads preparation and characterization

ρ-Benzoquinone-activated alginate beads were presented as a new carrier for affinity covalent immobilization of glucoamylase enzyme. Evidences of alginate modification were extracted from FT-IR and thermal gravimetric analysis and supported by morphological changes recognized through SEM examination. Factors affecting the modification process such as ρ-benzoquinone (PBQ) concentration, reaction time, reaction temperature, reaction pH and finally alginate concentration, have been studied. Its influence on the amount of coupled PBQ was consequently correlated to the changes of the catalytic activity and the retained activity of immobilized enzyme, the main parameters judging the success of the immobilization process. The immobilized glucoamylase was found kept almost 80% of its native activity giving proof of non-significant substrate, starch, diffusion limitation. The proposed affinity covalent immobilizing technique would rank among the potential strategies for efficient immobilization of glucoamylase enzyme.

Production of glucose and fructose syrups from cassava (Manihot esculenta Crantz) starch using enzymes produced by microorganisms isolated from Brazilian Cerrado soil

The high demands for sugars and the development of enzymatic technology have increased the production of sweeteners, especially for glucose and fructose syrups. This work describe a technology for glucose and fructose syrups from Brazilian cassava starch using enzymes produced by soil microrganisms isolated from the Brazilian Cerrado soil. Firstly, Aspergillus niger and Streptomyces sp. were isolated from the soil and used as glucoamylase (GA) and glucose isomerase (GI) producer sources. After characterization, GA and GI exhibited optimum pH 4.5 and 8.0, respectively. GA showed maximum activity at 60 ºC and GI at 85 ºC. GA and GI retained 65 and 80%, respectively, of initial activity after 180 minutes of incubation at 60 ºC. The kinetic parameters Km and Vmáx were 0.476 (mg.mL-1) and 8.58 (µmol/minute) for GA and 0.082 (M) and 48.20 (µmol/minute) for GI. The maximum glucose syrups production occurred after 24 hours of reaction with a 98% yield. The production of fructose syrups with 42% (w/v) was reached after 96 hours of reaction.

Hydroxyapatite organofunctionalized with silylating agents to heavy cation removal

Hydroxyapatite surface silylation with organosilane derivatives (H3CO)3SiR, R being the corresponding organic moieties CH2CH2CH2NH2, CH2CH2CH2NHCH2CH2NH2, and CH2CH2CH2NHCH2CH2NHCH2CH2NH2, was carried out to yield organofunctionalized nanomaterials, named HApR1, HApR2, and HApR3, respectively. The products were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction, thermogravimetry, and (1P and 13C NMR in the solid state. The amounts of groups grafted onto surfaces were 0.75+/-0.05, 2.35+/-0.14, and 2.48+/-0.18 mmolg(-1) for HApRx (x=1,2,3) surfaces, respectively. Linear correlations between elemental analysis, mass loss, (31)P chemical shift data, and the characteristics of the chain of each alkoxysilane were observed. The organic basic centers distributed onto the external surface have the ability to adsorb divalent copper and cobalt cations from aqueous solution. The degree of adsorption obtained from batchwise processes showed the best performance of these synthesized nanomaterials when compared with the pristine hydroxyapatite.