Effects of organic solvents on activity and conformation of recombinant Candida antarctica lipase A produced by Pichia pastoris

Effect of attaching hydrophilic oligopeptides to the C-terminus of organic solvent-tolerant metal-free bromoperoxidase BPO-A1 from Streptomyces aureofaciens on organic solvent-stability

Metal-free bromoperoxidase BPO-A1 from Streptomyces aureofacience was selected among several similar enzymes exhibiting brominating activity as the most stable haloperoxidase against 70%(v/v) methanol. A comparison of the BPO-A1 and octahistidine-tagged BPO-A1 at the C-terminus (BPO-A1-His₈) revealed that the His-tag enhanced the organic solvent-stability of BPO-A1 with pH- and heat-stabilities. Additionally, the contribution of the hydrophilicity at the C-terminal of BPO-A1 to the organic solvent-stability was confirmed employing several mutants bearing hydrophilic oligopeptides. Fortunately, two excellent mutants, BPO-A1-Lys₈ and BPO-A1-Arg₈, with high stabilities against various water-miscible organic solvents were obtained. In conclusion, the enhancing effect of the hydrophilic oligopeptides on the organic solvent-stability was associated with a decrease in the hydrophobic surface area near the C-terminus.

Immobilization of Candida antarctica Lipase A onto Macroporous Resin NKA-9: Esterification and Glycerolysis Performance Study

In this study, lipase A from Candida antarctica (CALA) was immobilized onto the macroporous resin NKA-9. Immobilization conditions (pH, time and CALA concentration) were studied, enzymatic activity and immobilization efficiency (IE) up to 968.89 U/g and 53.19% were respectively obtained under optimal conditions (immobilization pH 5.0, time 5 h and CALA concentration at 30 mg/mL). Then, the NKA-9 supported CALA (CALA@NKA-9) samples were used to catalyze glycerolysis in solvent-free system. With 0.25 g of the present CALA@NKA-9 (soybean oil 3.52 g and glycerol 0.184 g) and after 12 h reaction at 50 °C, diacylglycerols (DAG) content up to 64.37% and triacylglycerols (TAG) conversion at 83.33% were obtained. The relationship between temperature and TAG conversion was LnV ₀ = 13.9310-6.4212/T for CALA@NKA-9. Meanwhile, the activation energy (Ea) of CALA@NKA-9 was calculated to be 53.39 kJ/mol. In addition, reusability in the glycerolysis reaction was also evaluated, and 57.82% of the initial glycerolysis activity was retained after 9 consecutive applications. Furthermore, the CALA@NKA-9 was also used to catalyze the esterification (esterification of fatty acids with glycerol), however, the present CALA@NKA-9 cannot initiate the esterification. Therefore, the present CALA@NKA-9 is shown to be potential for DAG production through glycerolysis reaction.

Stability comparison of four lipases and catalytic mechanism during the synthesis of 1,3-di-oleic-2-medium chain triacylglycerols in a trace water-in-oil system: Experimental analyses and computational simulations

In the present study, a kind of structured lipids, namely 1,3-di-oleic-2-medium chain (OMO) triacylglycerols, were synthesized through lipase-catalyzed reactions using coconut oil and rapeseed acid as materials in a trace water-in-oil system. Experimental analysis and computational simulations were undertaken to compare the stability of four lipases including Lipozyme RMIM, Lipozyme TLIM, Novozym 435, and Aspergillus oryzae immobilized lipase (AOIM), and illustrate catalytic mechanism of Novozym 435 during the synthesis of OMO. Fourier transform infrared and molecular dynamics simulation results demonstrated that a decrease in ordered structure (α-helix and β-sheet) led to a reduction in enzyme activity. Compared with Lipozyme RMIM and Novozym 435, Lipozyme TLIM and AOIM exhibited better stability due to a short-chain lid in TLIM, which covers activity sites, and hydrogen bonds formed between activity center of AOIM and water. Among four lipases, AOIM exhibited best catalytic performance: a OMO yield of 30.7% at 3 hr and a good stability of long term (48 hr). Density functional theory results demonstrated that specifically, during the synthesis of OMO triacylglycerol, the addition of Novozym 435 (derived from Candida antarctica lipase B, CALB) substantially lowered reaction barriers (64.4 KJ/mol with CALB vs. 332.7 KJ/mol with no lipase), aiding in the generation of OMO because of the formations of transitional tetrahedral intermediates. A trace water-in-oil system was a green and efficient alternative for lipase-catalyzed production of OMO, and this study provided crucial insights into the stability/instability and catalytic mechanisms of lipase in the synthesis of structured lipids. PRACTICAL APPLICATIONS: We compared the stability of Lipozyme RMIM, Lipozyme 435, Lipozyme TLIM, and AOIM during the synthesis of the OMO triacylglycerols in a trace water-in-oil system, where exhibited a high catalytic activity of lipase in water-oil interface. AOIM had the highest stability and showed the best catalytic performance due to the formation of hydrogen bonds. Besides, for the first time, the transition tetrahedral structure was revealed in the enzymatic synthesis of medium- and long-chain triacylglycerols. This study provides a rational approach to compare lipase stability and a possible hint to choose appropriate enzyme in a specific catalytic condition.

Continuous-Flow Biocatalytic Process for the Synthesis of the Best Stereoisomers of the Commercial Fragrances Leather Cyclohexanol (4-Isopropylcyclohexanol) and Woody Acetate (4-(Tert-Butyl)Cyclohexyl Acetate)

Leather cyclohexanol (4-(isopropyl)cyclohexanol) and woody acetate (4-(tert-butyl)cyclohexyl acetate) are commercialized for functional perfumery applications as mixtures of cis- and trans-isomers. The cis-isomers are more potent odorants than the corresponding trans counterparts, but they are the less favoured products in most of the classical synthetic routes. Known stereoselective routes to cis-4-alkylcyclohexanols are characterized by a high environmental burden and/or troublesome reaction work-up. In this work, we examine the use of commercial alcohol dehydrogenases (ADHs) to produce cis-4-alkylcyclohexanols, including the two derivatives with isopropyl and tert-butyl substituents, by the stereoselective reduction of the corresponding ketones. High conversions and diastereoisomeric excess values were achieved with five of the eighteen tested ADHs. To complete the synthetic approach to woody acetate, Candida antarctica A (CALA) was employed as a catalyst for the enzymatic acetylation of cis-4-(tert-butyl)cyclohexanol. In order to provide a technological upgrade to the production of the most odorous isomers of the two commercial fragrances, we designed a continuous-flow process based on the combination of in-line enzymatic steps with in-line work-up, effectively providing samples of cis-leather cyclohexanol and cis-woody acetate with high diastereoisomeric purity.

Solvent stable microbial lipases: current understanding and biotechnological applications

OBJECTIVE

This review examines on our current understanding of microbial lipase solvent tolerance, with a specific focus on the molecular strategies employed to improve lipase stability in a non-aqueous environment.

RESULTS

It provides an overview of known solvent tolerant lipases and of approaches to improving solvent stability such as; enhancing stabilising interactions, modification of residue flexibility and surface charge alteration. It shows that judicious selection of lipase source supplemented by appropriate enzyme stabilisation, can lead to a wide application spectrum for lipases.

CONCLUSION

Organic solvent stable lipases are, and will continue to be, versatile and adaptable biocatalytic workhorses commonly employed for industrial applications in the food, pharmaceutical and green manufacturing industries.

Stability and structure of Penicillium chrysogenum lipase in the presence of organic solvents

The present work describes the enzymatic properties of Penicillium chrysogenum lipase and its behavior in the presence of organic solvents. The temperature and pH optima of the purified lipase was found to be 55 °C and pH 8.0 respectively. The lipase displayed remarkable stability in both polar and non-polar solvents upto 50% (v/v) concentrations for 72 h. A structural perspective of the purified lipase in different organic solvents was gained by using circular dichroism and intrinsic fluorescence spectroscopy. The native lipase consisted of a predominant α-helix structure which was maintained in both polar and non-polar solvents with the exception of ethyl butyrate where the activity was decreased and the structure was disrupted. The quenching of fluorescence intensity in the presence of organic solvents indicated the transformation of the lipase microenviroment P. chrysogenum lipase offers an interesting system for understanding the solvent stability mechanisms which could be used for rationale designing of engineered lipase biocatalysts for application in organic synthesis in non-aqueous media.

Lipase-catalysed esters synthesis of cafestol and kahweol

Cafestol and kahweol (C&K), two coffee diterpene alcohols with structural similarity which exhibit anticarcinogenic effects, were isolated from green coffee Arabica beans, followed by their lipase-catalysed esterification and purification by preparative high-performance liquid chromatography (HPLC). The isolation and enzymatic synthesis parameters of C&K esters were studied, with the latter optimised by a Central Composite Design; both procedures were monitored by gas chromatography. Scale up and improved isolation conditions resulted in 1.29 g of C&K, with 98% purity from 300 g of green Arabica beans. The highest C&K ester yields were observed using an alcohol:fatty acid molar ratio of 1:5, 73.3 mg mL^-1 of CAL-B enzyme, 70 °C and 240 rpm for 3 days in toluene, leading to 85-88% conversion among a variety of tested C&K esters, including n-C_14:0-C_20:0, C_18:1, C_18:2 and C_18:3.

The near-ideal catalytic property of Candida antarctica lipase A to highly concentrate n-3 polyunsaturated fatty acids in monoacylglycerols via one-step ethanolysis of triacylglycerols

Declining quantity/quality of available n-3 polyunsaturated fatty acids (n-3 PUFAs) resources demand innovative technology to concentrate n-3 PUFAs from low quality oils into value-added products/health-beneficial ingredients rich in n-3 PUFAs. This work proposed the catalytic property and specificity of an ideal enzyme required to tackle this task and identified Candida antarctica lipase A (CAL-A) is such a near-ideal enzyme in practice, which concentrates n-3 PUFAs from 25% to 27% in oils to a theoretically closer value 90% in monoacylglycerols (MAGs) via one-step enzymatic ethanolysis. Non-regiospecificity and high non-n-3 PUFAs preference of CAL-A are the catalytic feature to selectively cleave non-n-3 PUFAs in all 3 positions of triacylglycerols (TAGs); while high ethanol/TAGs ratio, low operation temperature and high tolerance to polar ethanol are essential conditions beyond biocatalyst itself. C-13 Nuclear magnetic resonance ((13)C NMR) analysis and competitive factor estimation verified the hypothesis and confirmed the plausible suggestion of catalytic mechanism of CAL-A.

Lipolytic potential of Aspergillus japonicus LAB01: production, partial purification, and characterisation of an extracellular lipase

Lipolytic potential of Aspergillus japonicus LAB01 was investigated by describing the catalytic properties and stability of a secreted extracellular lipase. Enzyme production was considered high under room temperature after 4 days using sunflower oil and a combination of casein with sodium nitrate. Lipase was partially purified by 3.9-fold, resulting in a 44.2% yield using ammonium sulphate precipitation (60%) quantified with Superose 12 HR gel filtration chromatography. The activity of the enzyme was maximised at pH 8.5, and the enzyme demonstrated stability under alkaline conditions. The optimum temperature was found to be 45°C, and the enzyme was stable for up to 100 minutes, with more than 80% of initial activity remaining after incubation at this temperature. Partially purified enzyme showed reasonable stability with triton X-100 and was activated in the presence of organic solvents (toluene, hexane, and methanol). Among the tested ions, only Cu²⁺, Ni²⁺, and Al³⁺ showed inhibitory effects. Substrate specificity of the lipase was higher for C14 among various p-nitrophenyl esters assayed. The K_M and V_max values of the purified enzyme for p-nitrophenyl palmitate were 0.13 mM and 12.58 umol/(L·min), respectively. These features render a novel biocatalyst for industrial applications.

Production of fatty acid butyl esters using the low cost naturally immobilized Carica papaya lipase

In this work, the low cost naturally immobilized Carica papaya lipase (CPL) was investigated for production of fatty acid butyl esters (FABE) to fulfill the aim of reducing the lipase cost in the enzymatic butyl-biodiesel process. The CPL showed specificities to different alcohol acyl acceptors. Alcohols with more than three carbon atoms did not have negative effects on the CPL activity. The CPL catalyzed butanolysis for FABE production was systematically investigated. The reaction solvent, alcohol/oil molar ratio, enzyme amount, reaction temperature, and water activity all affected the butanolysis process. Under the optimized conditions, the highest conversion of 96% could be attained in 24 h. These optimal conditions were further applied to CPL catalyzed butanolysis of other vegetable oils. All of them showed very high conversion. The CPL packed-bed reactor was further developed, and could be operated continuously for more than 150 h. All of these results showed that the low cost Carica papaya lipase can be used as a promising lipase for biodiesel production.

Conformation and catalytic properties studies of Candida rugosa Lip7 via enantioselective esterification of ibuprofen in organic solvents and ionic liquids

Enantioselective esterification of ibuprofen was conducted to evaluate the enzyme activity and ees of lipase from Candida rugosa (CRL7) in ten conventional organic solvents and three ionic liquids. Different alcohols were tested for selecting the most suitable acyl acceptor due to the fact that the structure of alcohols (branch and length of carbon chains; location of -OH functional group) could affect the enzyme activity and ees. The results of alcohol and solvent selection revealed that 1-isooctanol and isooctane were the best substrate and reaction medium, respectively, because of the highest enzyme activity and ees. Compared with the control, conformational studies via FT-IR indicate that the variations of CRL7's secondary structure elements are probably responsible for the differences of enzyme activity and ees in the organic solvents and ionic liquids. Moreover, the effects of reaction parameters, such as molar ratio, water content, temperature, and reaction time, in the selected reaction medium, were also examined.

Improving activity and enantioselectivity of lipase via immobilization on macroporous resin for resolution of racemic 1- phenylethanol in non-aqueous medium

Background

Burkholderia cepacia lipase (BCL) has been proved to be capable of resolution reactions. However, its free form usually exhibits low stability, bad resistance and no reusability, which restrict its further industrial applications. Therefore, it is of great importance to improve the catalytic performance of free lipase in non-aqueous medium.

Results

In this work, macroporous resin NKA (MPR-NKA) was utilized as support for lipase immobilization. Racemic transesterification of 1-phenylethanol with vinyl acetate was chosen as model reaction. Compared with its free form, the enzyme activity and enantioselectivity (ee_s) of the immobilized lipase have been significantly enhanced. The immobilized BCL exhibited a satisfactory thermostability over a wide range of temperature (from 10 to 65°C) and an excellent catalytic efficiency. After being used for more than 30 successive batches, the immobilized lipase still kept most of its activity. In comparison with other immobilized lipases, the immobilized BCL also exhibits better catalytic efficiency, which indicates a significant potential in industrial applications.

Conclusion

The results of this study have proved that MPR-NKA was an excellent support for immobilization of lipase via the methods of N₂ adsorption–desorption, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Fourier transform-infrared spectroscopy (FT-IR). The improvement of enzyme activity and ee_s for the immobilized lipase was closely correlated with the alteration of its secondary structure. This information may contribute to a better understanding of the mechanism of immobilization and enzymatic biotransformation in non-aqueous medium.

Chemoenzymatic synthesis and biological evaluation of enantiomerically enriched 1-(β-hydroxypropyl)imidazolium- and triazolium-based ionic liquids

Racemic 1-(β-hydroxypropyl)azoles were prepared by solvent-free direct regioselective ring opening of 1,2-propylene oxide with imidazole or 1,2,4-triazole. Lipase-catalyzed transesterification of alcohols with vinyl acetate resulted in kinetic enantiomers resolution. Separated (S)-enantiomers of (+)-1-(1H-imidazol-1-yl)propan-2-ol and (+)-1-(1H-1,2,4-triazol-1-yl)propan-2-ol were quaternized with alkyl bromides or iodides, yielding novel optically active ionic liquids. Racemic salts were tested against a wide range of microorganisms.