A highly-active endo-1,3-1,4-β-glucanase from thermophilic Talaromyces emersonii CBS394.64 with application potential in the brewing and feed industries

Biochemical properties and application of a multi-domain β-1,3-1,4-glucanase from Fibrobacter sp

A novel glycoside hydrolase (GH) family 16 multi-domain β-1,3-1,4-glucanase (FsGlc16A) from Fibrobacter sp. UWP2 was identified, heterogeneously expressed, and its enzymatic properties, protein structure and application potential were characterized. Enzymological characterization showed that FsGlc16A performed the optimal catalytic activity at pH 4.5 and 50 °C with a specific activity of 3263 U/mg. FsGlc16A exhibited the substrate specificity towards oat β-glucan, barley β-glucan and lichenan, and in addition, it hydrolyzed oat β-glucan and lichenan into different β-glucooligosaccharides with polymerization degrees of 3-4, which further illustrated that it belonged to the endo-type β-1,3-1,4-glucanase. FsGlc16A was classified in subfamily25 of GH16. A 'PXSSSS' repeats domain was identified at the C-terminus of FsGlc16A, which was distinct from the typical GH family 16 β-1,3-1,4-glucanases. Removing the 'PXSSSS' repeats domain affected the binding of the substrate to FsGlc16A and reduced the enzyme activity. FsGlc16A displayed good potential for the applications, which hydrolyzed oat bran into β-glucooligosaccharides, and reduced filtration time (18.89 %) and viscosity (3.64 %) in the saccharification process. This study investigated the enzymatic properties and domain function of FsGlc16A, providing new ideas and insights into the study of β-1,3-1,4-glucanase.

Modulation of the catalytic activity and thermostability of a thermostable GH7 endoglucanase by engineering the key loop B3

The loop B3 of glycoside hydrolase family 7 (GH7) endoglucanases is confined into long and short types. TtCel7 is a thermophilic GH7 endoglucanase from Thermothelomyces thermophilus ATCC 42464 with a long loop B3. TtCel7 was distinct for the excellent thermostability (>30 % residual activity after 1-h incubation at 90 °C). The catalytic efficiency was reduced by removing the disulfide bond in loop B3 (C220A) and truncated the loop B3 (B3cut). However, B3cut exhibited improved thermostability, the remaining enzyme activity increased by 39 %-171 % compared toTtCel7 when treated at 70-90 °C for 1-h. Based on the analysis of molecular dynamics simulation, both loops B1 and A3 of B3cut swing toward the catalytic center, which contributed to the reduced cleft-space and increased structure-rigidity. Conversely, the deletion of disulfide bond resulted in a reduction of structural rigidity in C220A. Through structure-directed enzyme modulation, this study has identified two structural elements that are related to the catalysis and thermostability of TtCel7. The loop B3 of TtCel7 possibly stretches the catalytic pocket, thereby increases the openness of the catalytic tunnel and enhancing flexibility for efficient catalysis. Additionally, the disulfide bond within loop B3 serves to enhance structural stability and maintain a heightened level of activity.

Biochemical Characterization of an Endoglucanase GH7 from Thermophile Thermothielavioides terrestris Expressed on Aspergillus nidulans

Endoglucanases (EC 3.2.1.4) are important enzymes involved in the hydrolysis of cellulose, acting randomly in the β-1,4-glycosidic bonds present in the amorphous regions of the polysaccharide chain. These biocatalysts have been classified into 14 glycosyl hydrolase (GH) families. The GH7 family is of particular interest since it may act on a broad range of substrates, including cellulose, β-glucan, and xylan, an attractive feature for biotechnological applications, especially in the renewable energy field. In the current work, a gene from the thermophilic fungus Thermothielavioides terrestris, encoding an endoglucanase GH7 (TtCel7B), was cloned in the secretion vector pEXPYR and transformed into the high-protein-producing strain Aspergillus nidulans A773. Purified TtCel7B has a molecular weight of approximately 66 kDa, evidenced by SDS-PAGE. Circular dichroism confirmed the high β-strand content consistent with the canonical GH7 family β-jellyroll fold, also observed in the 3D homology model of TtCel7B. Biochemical characterization assays showed that TtCel7B was active over a wide range of pH values (3.5–7.0) and temperatures (45–70 °C), with the highest activity at pH 4.0 and 65 °C. TtCel7B also was stable over a wide range of pH values (3.5–9.0), maintaining more than 80% of its activity after 24 h. The KM and Vmax values in low-viscosity carboxymethylcellulose were 9.3 mg mL−1 and 2.5 × 104 U mg−1, respectively. The results obtained in this work provide a basis for the development of applications of recombinant TtCel7B in the renewable energy field.

Expression, characterization, and activity optimization of a novel cellulase from the thermophilic bacteria Cohnella sp. A01

Cellulases are hydrolytic enzymes with wide scientific and industrial applications. We described a novel cellulase, CelC307, from the thermophilic indigenous Cohnella sp. A01. The 3-D structure of the CelC307 was predicted by comparative modeling. Docking of CelC307 with specific inhibitors and molecular dynamic (MD) simulation revealed that these ligands bound in a non-competitive manner. The CelC307 protein was purified and characterized after recombinant expression in Escherichia coli (E. coli) BL21. Using CMC 1% as the substrate, the thermodynamic values were determined as K_m 0.46 mM, k_cat 104.30 × 10^-3 (S^-1), and k_cat/K_m 226.73 (M^-1 S^-1). The CelC307 was optimally active at 40 °C and pH 7.0. The culture condition was optimized for improved CelC307 expression using Plackett-Burman and Box-Behnken design as follows: temperature 20 °C, pH 7.5, and inoculation concentration with an OD₆₀₀ = 1. The endoglucanase activity was positively modulated in the presence of Na⁺, Li⁺, Ca²⁺, 2-mercaptoethanol (2-ME), and glycerol. The thermodynamic parameters calculated for CelC307 confirmed its inherent thermostability. The characterized CelC307 may be a suitable candidate for various biotechnological applications.

Enhanced acidic resistance ability and catalytic properties of Bacillus 1,3-1,4-β-glucanases by sequence alignment and surface charge engineering

High stability at acidic environment is required for 1,3-1,4-β-glucanase to function in biofuel, brewing and animal feed industries. In this study, a mesophilic β-glucanase from Bacillus terquilensis CGX 5-1 was rationally engineered through sequence alignment and surface charge engineering to improve its acidic resistance ability. Nineteen singly-site variants were constructed and Q1E, I133L and V134A variants showed better acidic stability without the compromise of catalytic property and thermostability. Furthermore, four multi-site variants were constructed and one double-site variant Q1E/I133L with better stability at acidic environment and higher catalytic property was obtained. The fluorescence spectroscopy and structural analysis showed that more surface negative charge, decreased exposure degree of residue No.1, shifted side chain direction of residue No.133 and the lower total and folding free energy might be the reason for the improvement of acidic stability of Q1E/I133L variant. The obtained Q1E/I133L variant has potential applications in industries.

A Thermostable Aspergillus fumigatus GH7 Endoglucanase Over-Expressed in Pichia pastoris Stimulates Lignocellulosic Biomass Hydrolysis

In the context of avoiding the use of non-renewable energy sources, employing lignocellulosic biomass for ethanol production remains a challenge. Cellulases play an important role in this scenario: they are some of the most important industrial enzymes that can hydrolyze lignocellulose. This study aims to improve on the characterization of a thermostable Aspergillus fumigatus endo-1,4-β-glucanase GH7 (Af-EGL7). To this end, Af-EGL7 was successfully expressed in Pichia pastoris X-33. The kinetic parameters K_m and V_max were estimated and suggested a robust enzyme. The recombinant protein was highly stable within an extreme pH range (3.0-8.0) and was highly thermostable at 55 °C for 72 h. Low Cu²⁺ concentrations (0.1-1.0 mM) stimulated Af-EGL7 activity up to 117%. Af-EGL7 was tolerant to inhibition by products, such as glucose and cellobiose. Glucose at 50 mM did not inhibit Af-EGL7 activity, whereas 50 mM cellobiose inhibited Af-EGL7 activity by just 35%. Additionally, the Celluclast^® 1.5L cocktail supplemented with Af-EGL7 provided improved hydrolysis of sugarcane bagasse "in natura", sugarcane exploded bagasse (SEB), corncob, rice straw, and bean straw. In conclusion, the novel characterization of Af-EGL7 conducted in this study highlights the extraordinary properties that make Af-EGL7 a promising candidate for industrial applications.

Disulfide Bond Engineering of an Endoglucanase from Penicillium verruculosum to Improve Its Thermostability

Endoglucanases (EGLs) are important components of multienzyme cocktails used in the production of a wide variety of fine and bulk chemicals from lignocellulosic feedstocks. However, a low thermostability and the loss of catalytic performance of EGLs at industrially required temperatures limit their commercial applications. A structure-based disulfide bond (DSB) engineering was carried out in order to improve the thermostability of EGLII from Penicillium verruculosum. Based on in silico prediction, two improved enzyme variants, S127C-A165C (DSB2) and Y171C-L201C (DSB3), were obtained. Both engineered enzymes displayed a 15⁻21% increase in specific activity against carboxymethylcellulose and β-glucan compared to the wild-type EGLII (EGLII-wt). After incubation at 70 °C for 2 h, they retained 52⁻58% of their activity, while EGLII-wt retained only 38% of its activity. At 80 °C, the enzyme-engineered forms retained 15⁻22% of their activity after 2 h, whereas EGLII-wt was completely inactivated after the same incubation time. Molecular dynamics simulations revealed that the introduced DSB rigidified a global structure of DSB2 and DSB3 variants, thus enhancing their thermostability. In conclusion, this work provides an insight into DSB protein engineering as a potential rational design strategy that might be applicable for improving the stability of other enzymes for industrial applications.

Improved raw starch amylase production by Saccharomyces cerevisiae using codon optimisation strategies

Amylases are used in a variety of industries that have a specific need for alternative enzymes capable of hydrolysing raw starch. Five α-amylase and five glucoamylase-encoding genes were expressed in the Saccharomyces cerevisiae Y294 laboratory strain to select for recombinant strains that best hydrolysed raw corn starch. Gene variants of four amylases were designed using codon optimisation and different secretion signals. The significant difference in activity levels among the gene variants confirms that codon optimisation of fungal genes for expression in S. cerevisiae does not guarantee improved recombinant protein production. The codon-optimised glucoamylase variant from Talaromyces emersonii (temG_Opt) yielded 3.3-fold higher extracellular activity relative to the native temG, whereas the codon-optimised T. emersonii α-amylase (temA_Opt) yielded 1.6-fold more extracellular activity than the native temA. The effect of four terminator sequences was also investigated using temG and temG_Opt as reporter genes, with the ALY2T terminator resulting in a 14% increase in glucoamylase activity relative to the gene cassettes containing the ENO1T terminator. This is the first report of engineered S. cerevisiae strains to express T. emersonii amylase variants, and these enzymes may have potential applications in the industrial conversion of raw starch under fermentation conditions.

Insight into the cold adaptation and hemicellulose utilization of Cladosporium neopsychrotolerans from genome analysis and biochemical characterization

The occurrence of Cladosporium in cold ecosystems has been evidenced long before, and most of the knowledge about nutrient utilization of this genus is sporadic. An alpine soil isolate C. neopsychrotolerans SL-16, showing great cold tolerance and significant lignocellulose-degrading capability, was sequenced to form a 35.9 Mb genome that contains 13,456 predicted genes. Functional annotation on predicted genes revealed a wide array of proteins involved in the transport and metabolism of carbohydrate, protein and lipid. Large numbers of transmembrane proteins (967) and CAZymes (571) were identified, and those related to hemicellulose degradation was the most abundant. To undermine the hemicellulose (xyaln as the main component) utilization mechanism of SL-16, the mRNA levels of 23 xylanolytic enzymes were quantified, and representatives of three glycoside hydrolase families were functionally characterized. The enzymes showed similar neutral, cold active and thermolabile properties and synergistic action on xylan degradation (the synergy degree up to 15.32). Kinetic analysis and sequence and structure comparison with mesophilic and thermophilic homologues indicated that these cold-active enzymes employed different cold adaptation strategies to function well in cold environment. These similar and complementary advantages in cold adaptation and catalysis might explain the high efficiency of lignocellulose conversion observed in SL-16 under low temperatures.

Genome-wide characterization of cellulases from the hemi-biotrophic plant pathogen, Bipolaris sorokiniana, reveals the presence of a highly stable GH7 endoglucanase

BACKGROUND

Bipolaris sorokiniana is a filamentous fungus that causes spot blotch disease in cereals like wheat and has severe economic consequences. However, information on the identities and role of the cell wall-degrading enzymes (CWDE) in B. sorokiniana is very limited. Several fungi produce CWDE like glycosyl hydrolases (GHs) that help in host cell invasion. To understand the role of these CWDE in B. sorokiniana, the first step is to identify and annotate all possible genes of the GH families like GH3, GH6, GH7, GH45 and AA9 and then characterize them biochemically.

RESULTS

We confirmed and annotated the homologs of GH3, GH6, GH7, GH45 and AA9 enzymes in the B. sorokiniana genome using the sequence and domain features of these families. Quantitative real-time PCR analyses of these homologs revealed that the transcripts of the BsGH7-3 (3rd homolog of the GH 7 family in B. sorokiniana) were most abundant. BsGH7-3, the gene of BsGH7-3, was thus cloned into pPICZαC Pichia pastoris vector and expressed in X33 P. pastoris host to be characterized. BsGH7-3 enzyme showed a temperature optimum of 60 °C and a pH_opt of 8.1. BsGH7-3 was identified to be an endoglucanase based on its broad substrate specificity and structural comparisons with other such endoglucanases. BsGH7-3 has a very long half-life and retains 100% activity even in the presence of 4 M NaCl, 4 M KCl and 20% (v/v) ionic liquids. The enzyme activity is stimulated up to fivefold in the presence of Mn⁺² and Fe⁺² without any deleterious effects on enzyme thermostability.

CONCLUSIONS

Here we reanalysed the B. sorokiniana genome and selected one GH7 enzyme for further characterization. The present work demonstrates that BsGH7-3 is an endoglucanase with a long half-life and no loss in activity in the presence of denaturants like salt and ionic liquids, and lays the foundation towards exploring the Bipolaris genome for other cell wall-degrading enzymes.

Lignocellulose degrading extremozymes produced by Pichia pastoris: current status and future prospects

In this review article, extremophilic lignocellulosic enzymes with special interest on xylanases, β-mannanases, laccases and finally cellulases, namely, endoglucanases, exoglucanases and β-glucosidases produced by Pichia pastoris are reviewed for the first time. Recombinant lignocellulosic extremozymes are discussed from the perspectives of their potential application areas; characteristics of recombinant and native enzymes; the effects of P. pastoris expression system on recombinant extremozymes; and their expression levels and applied strategies to increase the enzyme expression yield. Further, effects of enzyme domains on activity and stability, protein engineering via molecular dynamics simulation and computational prediction, and site-directed mutagenesis and amino acid modifications done are also focused. Superior enzyme characteristics and improved stability due to the proper post-translational modifications and better protein folding performed by P. pastoris make this host favourable for extremozyme production. Especially, glycosylation contributes to the structure, function and stability of enzymes, as generally glycosylated enzymes produced by P. pastoris exhibit better thermostability than non-glycosylated enzymes. However, there has been limited study on enzyme engineering to improve catalytic efficiency and stability of lignocellulosic enzymes. Thus, in the future, studies should focus on protein engineering to improve stability and catalytic efficiency via computational modelling, mutations, domain replacements and fusion enzyme technology. Also metagenomic data need to be used more extensively to produce novel enzymes with extreme characteristics and stability.

A Novel GH7 Endo-β-1,4-Glucanase from Neosartorya fischeri P1 with Good Thermostability, Broad Substrate Specificity and Potential Application in the Brewing Industry

An endo-β-1,4-glucanase gene, cel7A, was cloned from the thermophilic cellulase-producing fungus Neosartorya fischeri P1 and expressed in Pichia pastoris. The 1,410-bp full-length gene encodes a polypeptide of 469 amino acids consisting of a putative signal peptide at residues 1–20, a catalytic domain of glycoside hydrolase family 7 (GH7), a short Thr/Ser-rich linker and a family 1 carbohydrate-binding module (CBM 1). The purified recombinant Cel7A had pH and temperature optima of pH 5.0 and 60°C, respectively, and showed broad pH adaptability (pH 3.0–6.0) and excellent stability at pH3.0–8.0 and 60°C. Belonging to the group of nonspecific endoglucanases, Cel7A exhibited the highest activity on barley β-glucan (2020 ± 9 U mg^–1), moderate on lichenan and CMC-Na, and weak on laminarin, locust bean galactomannan, Avicel, and filter paper. Under simulated mashing conditions, addition of Cel7A (99 μg) reduced the mash viscosity by 9.1% and filtration time by 24.6%. These favorable enzymatic properties make Cel7A as a good candidate for applications in the brewing industry.