Continuous production of pure maltodextrin from cyclodextrin using immobilized Pyrococcus furiosus thermostable amylase

Enzymatic synthesis and characterization of novel lipophilic inotodiol-oleic acid conjugates

In this study, we establish an efficient enzymatic approach for producing novel inotodiyl-oleates (IOs) from pure inotodiol and oleic acid to improve the properties of inotodiol. For the esterification between inotodiol and oleic acid, CALA and n-hexane were the optimal biocatalyst and solvents for forming IOs with 80.17% conversion yield. These IOs comprised two distinct monoesters, the C3 or C22 ester forms of inotodiol. Intriguingly, no diesters were detected. The IOs had a melting point of 53.48 °C, much lower than that of inotodiol (192.06 °C). The in vitro digestion rate of IOs (25-28%) was significantly (p < 0.05) lower than that of cholesteryl-oleate (60%). Additionally, IOs exhibited much lower in vivo absorption than inotodiol when orally administered using different formulations (p < 0.05). The results indicated that IOs were resistant to enzymatic digestion in the small intestine, which could be advantageous in targeting the large intestine for disease treatments.

Cost-effective and controllable synthesis of isomalto/malto-polysaccharides from β-cyclodextrin by combined action of cyclodextrinase and 4,6-α-glucanotransferase GtfB

Isomalto/malto-polysaccharides (IMMPs) derived from malto-oligosaccharides such as maltoheptaose (G7) are elongated non-branched gluco-oligosaccharides produced by 4,6-α-glucanotransferase (GtfB). However, G7 is expensive and cumbersome to produce commercially. In this study, a cost-effective enzymatic process for IMMPs synthesis is developed that utilizes the combined action of cyclodextrinase from Palaeococcus pacificus (PpCD) and GtfB-ΔN from Limosilactobacillus reuteri 121 to convert β-cyclodextrin into IMMPs with a maximum yield (16.19 %, w/w). The purified IMMPs synthesized by simultaneous or sequential treatments, designated as IMMP-Sim and IMMP-Seq, possess relatively high contents of α-(1 → 6) glucosidic linkages. By controlling the release of G7 and smaller malto-oligosaccharides by PpCD, IMMP-Seq was obtained of DP varying from 12.9 to 29.5. Enzymatic fingerprinting revealed different linkage-type distribution of α-(1 → 6) linked segments with α-(1 → 4) segments embedded at the reducing end and middle part. The proportion of α-(1 → 6) segments containing the non-reducing end was 56.76 % for IMMP-Sim but 28.98 % for IMMP-Seq. Addition of G3 or G4 as specific acceptors resulted in IMMPs exhibiting low polydispersity. This procedure can be applied as a novel bioprocess that does not require costy high-purity malto-oligosaccharides and with control of the average DP of IMMPs by adjusting the substrate composition.

Malto-oligosaccharides as critical functional ingredient: a review of their properties, preparation, and versatile applications

Malto-oligosaccharides (MOS) are α-1,4 glycosidic linked linear oligosaccharides of glucose, which have a diverse range of functional applications in the food, pharmaceutical, and other industries. They can be used to modify the physicochemical properties of foods thereby improving their quality attributes, or they can be included as prebiotics to improve their nutritional attributes. The degree of polymerization of MOS can be controlled by using specific enzymes, which means their functionality can be tuned for specific applications. In this article, we review the chemical structure, physicochemical properties, preparation, and functional applications of MOS in the food, health care, and other industries. Besides, we offer an overview for this saccharide from the perspective of prospect functional ingredient, which we feel lacks in the current literature. MOS could be expected to provide a novel promising substitute for functional oligosaccharides.

Co-immobilized Alcohol Dehydrogenase and Glucose Dehydrogenase with Resin Extraction for Continuous Production of Chiral Diaryl Alcohol

Ni²⁺-functionalized porous ceramic/agarose composite beads (Ni-NTA Cerose) can be used as carrier materials to immobilize enzymes harboring a metal affinity tag. Here, a 6×His-tag fusion alcohol dehydrogenase Mu-S5 and glucose dehydrogenase from Bacillus megaterium (BmGDH) were co-immobilized on Ni-NTA Cerose to construct a packed bed reactor (PBR) for the continuous synthesis of the chiral intermediate (S)-(4-chlorophenyl)-(pyridin-2-yl) methanol ((S)-CPMA) NADPH recycling, and in situ product adsorption was achieved simultaneously by assembling a D101 macroporous resin column after the PBR. Using an optimum enzyme activity ratio of 2:1 (Mu-S5: BmGDH) and hydroxypropyl-β-cyclodextrin as co-solvent, a space-time yield of 1560 g/(L·d) could be achieved in the first three days at a flow rate of 5 mL/min and substrate concentration of 10 mM. With simplified selective adsorption and extraction procedures, (S)-CPMA was obtained in 84% isolated yield.

A novel maltoheptaose-based sugar ester having excellent emulsifying properties and optimization of its lipase-catalyzed synthesis

A novel maltoheptaose-palmitate ester (G7-PA) was synthesized and investigated for emulsion properties. First of all, the optimal conditions for lipase-catalyzed G7-PA synthesis, which were 0.2 of the G7/PA molar ratio, 33.5 U of immobilized CALB per 1 g of PA in 10% DMSO, were determined by response surface methodology. G7-PA was compared with the commercial sucrose-PA (S-PA) in terms of emulsion-forming ability and stability at extreme conditions. At the 0.1% surfactant concentration, G7-PA emulsion exhibited a droplet distribution similar to the 0.2% surfactant condition, while S-PA emulsion was quickly destabilized. G7-PA showed better emulsifying properties than the S-PA at the acidic condition (pH 3). Flocculation and phase separation was observed at the S-PA emulsion, but the G7-PA emulsion was stable for 7-day. In thermostability tests, G7-PA and S-PA both were stable up to the boiling temperature. Conclusively, G7-PA exhibits excellent properties as a biosurfactant in O/W emulsion compared with S-PA.

Properties and applications of starch modifying enzymes for use in the baking industry

Enzyme technology has many potential applications in the baking industry because carbohydrate-active enzymes specifically react with carbohydrate components, such as starch, in complex food systems. Amylolytic enzymes are added to starch-based foods, such as baking products, to retain moisture more efficiently and to increase softness, freshness, and shelf life. The major reactions used to modify the structure of food starch include: (1) hydrolysis of α-1, 4 or α-1, 6 glycosidic linkages, (2) disproportionation by the transfer of glucan moieties, and (3) branching by formation of α-1, 6 glycosidic linkage. The catalytic reaction of a single enzyme or a mixture of more than two enzymes has been applied, generating novel starches, with chemical changes in the starch structure, in which the changes of molecular mass, branch chain length distribution, and the ratio of amylose to amylopectin may occur. These developments of enzyme technology highlight the potential to create various structured-starches for the food and baking industry.

Bacterial and Archaeal α-Amylases: Diversity and Amelioration of the Desirable Characteristics for Industrial Applications

Industrial enzyme market has been projected to reach US$ 6.2 billion by 2020. Major reasons for continuous rise in the global sales of microbial enzymes are because of increase in the demand for consumer goods and biofuels. Among major industrial enzymes that find applications in baking, alcohol, detergent, and textile industries are α-amylases. These are produced by a variety of microbes, which randomly cleave α-1,4-glycosidic linkages in starch leading to the formation of limit dextrins. α-Amylases from different microbial sources vary in their properties, thus, suit specific applications. This review focuses on the native and recombinant α-amylases from bacteria and archaea, their production and the advancements in the molecular biology, protein engineering and structural studies, which aid in ameliorating their properties to suit the targeted industrial applications.