Tween 80 influences the production of intracellular lipase by Schizochytrium S31 in a stirred tank reactor

Integration of the Exogenous Tuning of Thraustochytrid Fermentation and Sulfur Polymerization of Single-Cell Oil for Developing Plant-like Oils

In this study, we have demonstrated a bioprocessing approach encompassing the exogenous addition of low-molecular-weight compounds to tune the fatty acid (FA) profile in a novel thraustochytrid strain to produce desirable FAs. Maximum lipid recovery (38%, dry wt. biomass) was obtained at 1% Tween 80 and 0.25 mg/L of Vitamin B12. The transesterified lipid showed palmitic acid (C16, 35.7% TFA), stearic acid (C18, 2.1% TFA), and oleic acid (C18:1, 18.7% TFA) as the main components of total FAs, which are mainly present in plant oils. Strikingly, D-limonene addition in the fermentation medium repressed the production of polyunsaturated fatty acid (PUFAs). Sulfur-polymerization-guided lipid separation revealed the presence of saturated (SFAs, 53% TFA) and monounsaturated fatty acids (MUFAs, 46.6% TFA) in thraustochytrid oil that mimics plant-oil-like FA profiles. This work is industrially valuable and advocates the use of sulfur polymerization for preparation of plant-like oils through tuneable thraustochytrid lipids.

Bioconversion of waste acid oil to docosahexaenoic acid by integration of "ex novo'' and "de novo'' fermentation in Aurantiochytrium limacinum

Thraustochytrids have predominantly been grown on hydrophilic substrates i.e. by "de novo" fermentation. The fatty acid composition of thraustochytrids oil in "de novo" mode is enriched in saturated palmitic acid and polyunsaturated docosahexaenoic acid. The "ex novo" fermentation of a novel Aurantiochytrium limacinum ICTSG-17 with waste acid oil altered the fatty acid composition of produced oil. This led to increased total unsaturated fatty acids (TUFA) and concomitant decrease in the total saturated fatty acids (TSFA) resulting in higher TUFA/TSFA ratio. However, cell growth and DHA content in "ex novo" were lower than that of "de novo" fermentation. Integration of "de novo" and "ex novo" fermentation modes were devised to attain high biomass and lipids enriched in DHA. Sequential "de novo"-"ex novo" fermentation resulted in ~20 g/L biomass and ~40% DHA content and higher TUFA/TSFA ratio as compared to that of "de novo" mode.

The Occurrence of Triple Catalytic Characteristics of Yeast Lipases and Their Application Prospects in Biodiesel Production from Non-Edible Jatropha curcas Oil in a Solvent-Free System

Extracellular and cell-bound lipase-producing yeasts were isolated from the palm oil mill wastes and investigated for their potential uses as biocatalysts in biodiesel production. Twenty-six yeast strains were qualitatively screened as lipase producers. From those yeast strains, only six were selected and screened further for quantitative lipase production.The phylogenetic affiliations of the yeast strains were confirmed by investigating the D1/D2 domains of 26S rDNA and ITS1-5.8S-ITS2 molecular regions of the six yeast strains selected as potent lipase producers. The three yeast strains A4C, 18B, and 10F showed a close association with Magnusiomyces capitatus. Two yeast strains (17B and AgB) had a close relationship with Saprochaete clavata, whereas the strain AW2 was identified as Magnusiomyces spicifer. Three main catalytic activities of the yeast lipases were evaluated and Magnusiomyces capitatus A4C, among the selected lipase-producing yeasts, had the highest extracellular lipolytic enzyme activity (969 U/L) with the cell-bound lipolytic enzyme activity of 11.3 U/gdm. The maximum cell-bound lipolytic activity (12.4 U/gdm) was observed in the cell-bound lipase fraction produced by Magnusiomyces spicifer AW2 with an extracellular lipolytic enzyme activity of 886 U/L. Based on the specific hydrolytic enzymatic activities, the cell-bound lipases (CBLs) from the three yeast strains M. capitatus A4C, M. spicifer AW2, and Saprochaete clavata 17B were further investigated for biodiesel production. Among them, the CBL from M. spicifer AW2 synthesized the most FAME (fatty acid methyl esters) at 81.2% within 12 h indicating that it has potential for application in enzymatic biodiesel production.

Nutrient recovery from tofu whey wastewater for the economical production of docosahexaenoic acid by Schizochytrium sp. S31

Docosahexaenoic acid plays a vital role in human health as it is essential for the proper function of the nervous system and for visual functions. To decrease the cost of docosahexaenoic acid production by Schizochytrium, the cost of the medium should be further decreased. In this study, the use of tofu whey wastewater to culture Schizochytrium sp. for docosahexaenoic acid production was tested, with the goal of reducing the medium cost. The results indicated that tofu whey wastewater presented a better culture performance with respect to biomass, lipid, and docosahexaenoic acid production compared with three traditional media. Through simple pH adjustment, the biomass and docosahexaenoic acid productivity reached 1.89 and 0.24 g/L/day, respectively, which were much higher than those obtained using traditional medium. The removal efficiency of chemical oxygen demand, total nitrogen, and total phosphorus reached 64.7, 66.0, and 59.3%, respectively. Due to the rich nutrients in tofu whey wastewater, the use of extra nitrogen source was avoided and the total medium cost for docosahexaenoic acid production in cultures using tofu whey wastewater was <1/3 of that of traditional media. This result indicated that tofu whey wastewater is an effective and economic basal medium for docosahexaenoic acid production by Schizochytrium sp.

A new strategy for the efficient production of pyocyanin, a versatile pigment, in Pseudomonas aeruginosa OG1 via toluene addition

Pseudomonas aeruginosa produce pyocyanin, which is an extracellular secondary metabolite and multifunctional pigment. In this study, the effects of several surfactants (Tween 20, Tween 80 and Triton X-100) and organic solvents (toluene and chloroform) on pyocyanin production and cell growth were investigated in submerged culture of P. aeruginosa OG1. Organic solvents were found to be more effective in the production of pyocyanin. The maximum production of pyocyanin (33 mg/L) was achieved when 0.2% toluene was added at the stationary growth phase (30 h), corresponding to significant increase of 312% compared with the control (8 mg/L). With the addition of toluene, pyocyanin production was significantly increased, but bacterial biomass reduced. Production of alkaline protease was also affected by toluene addition. It was found that the ratio of saturated/unsaturated fatty acids in the bacterial biomass significantly increased when toluene addition to the medium. This study revealed that with a novel strategy, the addition of toluene to the fermentation medium significantly increased pyocyanin production. These findings suggest that solvent-assisted fermentation strategy can be used in microbial fermentations to increase the production of biotechnological products such as industrially important pigment and enzyme. This study is a first investigation on the stimulation of pyocyanin release in the medium of P. aeruginosa cultures by the addition of toluene.

Algal biotechnology for pursuing omega-3 fatty acid (bioactive) production

Algae are spread in diversified ecosystems that include marine, freshwater, desert and hot springs and even snow and ice environments. Algae are classified as multicellular large sea weeds (macroalgae) or unicellular microalgae. Macroalgae are targeted for mining of natural biologically active components, which include proteins, linear peptides, cyclic peptides, and amino acids1. Recently, microalgae have been exploited for the production of high-value compounds such as lipids (omega-3 fatty acids), enzymes, polymers, toxins, antioxidants, and pigments (carotenoids)2. Thus, algal biotechnology is defined as ‘the technology developed using algae (macro or micro) to make or modify bioactive compounds, or products (nutritional supplements, fine chemicals) and renewable fuels for specific use’.