Conquering lignin recalcitrance by Pandoraea sp. B-6 to improve co-solvent pretreatment of corn stover

The application of green solvent in a biorefinery using lignocellulosic biomass as a feedstock

The high dependence on crude oil for energy utilization leads to a necessity of finding alternative sustainable resources. Solvents are often employed in valorizing the biomass into bioproducts and other value-added chemicals during treatment stages. Unfortunately, despite the effectiveness of conventional solvents, hindrances such as expensive solvents, unfavourable environmental ramifications, and complicated downstream separation systems often occur. Therefore, the scientific community has been actively investigating more cost-effective, environmentally friendly alternatives and possess the excellent dissolving capability for biomass processing. Generally, 'green' solvents are attractive due to their low toxicity, economic value, and biodegradability. Nonetheless, green solvents are not without disadvantages due to their complicated product recovery, recyclability, and high operational cost. This review summarizes and evaluates the recent contributions, including potential advantages, challenges, and drawbacks of green solvents, namely ionic liquids, deep eutectic solvents, water, biomass-derived solvents and carbon dioxide in transforming the lignocellulosic biomass into high-value products. Moreover, research opportunities for future developments and potential upscale implementation of green solvents are also critically discussed.

Recent advances in the valorization of plant biomass

Plant biomass is a highly abundant renewable resource that can be converted into several types of high-value-added products, including chemicals, biofuels and advanced materials. In the last few decades, an increasing number of biomass species and processing techniques have been developed to enhance the application of plant biomass followed by the industrial application of some of the products, during which varied technologies have been successfully developed. In this review, we summarize the different sources of plant biomass, the evolving technologies for treating it, and the various products derived from plant biomass. Moreover, the challenges inherent in the valorization of plant biomass used in high-value-added products are also discussed. Overall, with the increased use of plant biomass, the development of treatment technologies, and the solution of the challenges raised during plant biomass valorization, the value-added products derived from plant biomass will become greater in number and more valuable.

Derived high reducing sugar and lignin colloid particles from corn stover

Lignocellulosic biomass is considered as the largest potential candidate to develop alternative energy, such as biofuel, biomaterial. However, the efficient conversion of cellulose and practical utilization of lignin are great challenges for sustainable biorefinery. In this study, high reducing sugar yield and different size of lignin colloid particles (LCPs) were obtained via tetrahydrofuran-water (THF-H2O) pretreatment of corn stover (CS). THF-H2O as a co-solvent, could efficiently dissolve lignin and retain cellulose. After the pretreatment, 640.87 mg/g of reducing sugar was produced, that was 6.66-fold higher than that of the untreated CS. Meanwhile, the pretreatment liquor could form spherical LCPs with different sizes ranged from 202 to 732 nm through self-assembly. We studied the optimal pretreatment condition to simultaneously realize the high reducing sugar yield (588.4 mg/g) and excellent LCPs preparation with average size of 243 nm was under TH22 (THF-H2O pretreatment at 120 °C for 2 h). To further explore the formation of LCPs with different sizes. We studied the lignin structure changes of various conditions, concluded the size of LCPs was related to the lignin concentration and syringyl/guaiacyl (S/G) ratio. As the increase of the lignin concentration and S/G, the sizes of LCPs were increased. G-type lignin was easier to dissolve in the mild pretreatment supernatant, contributing to form smaller LCPs with a good dispersibility. In the severe condition, both of S and G-type lignin were dissolved due to the lignin depolymerization, formed the larger sphere particles. This work provides a novel perspective for the technical design of lignocellulosic biomass conversion.

The Roles of H2O/Tetrahydrofuran System in Lignocellulose Valorization

Lignocellulosic biomass as a potential alternative to fossil resource for the production of valuable chemicals and fuels has attracted substantial attention, while reducing the recalcitrance of lignocellulosic biomass is still challenging due to the complex and cross-linking structure of biomass. Solvent system plays important roles in the pretreatment of lignocellulose, enabling the transformation of solid biomass to liquid fluid with better mass and heat transfer, as well as in the selective formation of target products. In particular, H2O/tetrahydrofuran (H2O/THF) system has recently been widely applied in lignocellulose valorization, which has been proved to exhibit outstanding efficiency for the conversion of lignocellulose, solubilization of the intermediates and products, and shifting reaction equilibrium, thereby significantly improving the yield and selectivity of target products, as well as the full utilization of lignocellulose. In addition, THF shows low toxicity, and is known as a renewable solvent which can be produced from bio-derived chemicals. Herein, this review concentrates on the advances of H2O/THF system in lignocellulose valorization in recent years. Several aspects relative to the roles of H2O/THF system are discussed as follows: the pretreatment of lignin, conversion of hemicellulose and cellulose components in lignocelluloses, and the promoting formation of valuable chemicals like furfural, 5-hydroxymethyl furfural (HMF), levulinic acid, and so on, as well as the inhibiting role in humins formation. This review might provide useful information for the design of effective solvent system in full utilization of lignocellulosic biomass.