Effective strategy for improving sludge treatment rate and microbial mechanisms during chromium bioleaching of tannery sludge

Microbial electrochemical Cr(VI) reduction in a soil continuous flow system

Microbial electrochemical technologies represent innovative approaches to contaminated soil and groundwater remediation and provide a flexible framework for removing organic and inorganic contaminants by integrating electrochemical and biological techniques. To simulate in situ microbial electrochemical treatment of groundwater plumes, this study investigates Cr(VI) reduction within a bioelectrochemical continuous flow (BECF) system equipped with soil-buried electrodes, comparing it to abiotic and open-circuit controls. Continuous-flow systems were tested with two chromium-contaminated solutions (20-50 mg Cr(VI)/L). Additional nutrients, buffers, or organic substrates were introduced during the tests in the systems. With an initial Cr(VI) concentration of 20 mg/L, 1.00 mg Cr(VI)/(L day) bioelectrochemical removal rate in the BECF system was observed, corresponding to 99.5% removal within nine days. At the end of the test with 50 mg Cr(VI)/L (156 days), the residual Cr(VI) dissolved concentration was two orders of magnitude lower than that in the open circuit control, achieving 99.9% bioelectrochemical removal in the BECF. Bacteria belonging to the orders Solirubrobacteriales, Gaiellales, Bacillales, Gemmatimonadales, and Propionibacteriales characterized the bacterial communities identified in soil samples; differently, Burkholderiales, Mycobacteriales, Cytophagales, Rhizobiales, and Caulobacterales characterized the planktonic bacterial communities. The complexity of the microbial community structure suggests the involvement of different microorganisms and strategies in the bioelectrochemical removal of chromium. In the absence of organic carbon, microbial electrochemical removal of hexavalent chromium was found to be the most efficient way to remove Cr(VI), and it may represent an innovative and sustainable approach for soil and groundwater remediation. Integr Environ Assess Manag 2024;00:1-17. © 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Co-inoculation with beneficial microorganisms enhances tannery sludge bioleaching with Acidithiobacillus thiooxidans

Bioleaching of tannery sludge is an efficient and environmentally friendly way for chromium (Cr) removal, which supports the sustainable development of the leather industry. Acidithiobacillus thiooxidans has been reported effective in Cr bioleaching of tannery sludge. However, little is known about whether the presence of other benefiting species could further improve the Cr leaching efficiency of A. thiooxidans. Here, we studied the enhancing roles of four species namely Acidiphilium cryptum, Sulfobacillus acidophilus, Alicyclobacillus cycloheptanicus, and Rhodotorula mucilaginosa in chromium bioleaching of tannery sludge with A. thiooxidans by batch bioleaching experiments. We found that each of the four species facilitated the quick dominance of A. thiooxidans in the bioleaching process and significantly improved the bioleaching performance including bioleaching rate and efficiency. The bioleaching efficiency of Cr in the tannery sludge could reach 100% on the sixth day by co-inoculating A. thiooxidans and four auxiliary species. The achievements shed a light on the role of the community-level interactions on bioleaching and may also serve as guidance for managing bioleaching consortiums for better outcomes.

Bioleaching of heavy metals from wastewater sludge with the aim of land application

Presence of heavy metals in the wastewater sludge has greatly hindered sludge land application. Bioleaching has been developed for heavy metal removal from sludge. The pH of the sludge is declined by microorganisms with S or FeS as energy source. Sludge considered to be used in land is mainly due to its fertilizer values as it contains nitrogen, phosphorus, and potassium. Therefore, it is important to understand how the bioleaching would impact on sludge characterization. In addition, pathogens are great threat to human health. The ability of pathogen elimination of bioleaching is highly concerned. In this review, the major heavy metals in the sludge are summarized. The change of nitrogen, phosphorus, and potassium after bioleaching is stated. The pathogen elimination due to bioleaching has been discussed. The work has provided an insight of research need in sludge bioleaching with the aim of residual sludge land application.

Ultrasonic coupled bioleaching pretreatment for enhancing sewage sludge dewatering: Simultaneously mitigating antibiotic resistant genes and changing microbial communities

In this study, ultrasonic as a pretreatment coupled with bioleaching was used to enhance sludge dewaterability. Changes in microbial diversity and antibiotic resistant genes (ARGs) were studied during the combined treatment process. The results show that under optimal conditions, combined ultrasonic and bioleaching treatment led to decreases in the specific resistance of filtration and bioleaching time by 7.59% and 12.5%, respectively, compared with single bioleaching process. Using high pressure filtration system, the water content of sludge cake treated by the combined treatment was decreased to 58.04%, which was 10.04% lower than bioleaching sludge. After combined treatment, the microbial diversity and the total number of bacteria in the sludge decreased significantly, which caused the decreases in the absolute abundance of sulfonamide and tetracycline ARGs by 1.56-1.58 and 0.34-1.23 log units, respectively. However, the decrease in the total bacterial biomass was greater than the decrease in the number of potential hosts carrying the tetracycline ARG, resulting in an increase in the relative abundance of tetracycline gene. Furthermore, this study proposed a mechanism of the dewatering and ARGs, involving the combined ultrasonic and bioleaching treatment: Firstly, ultrasonic cavitation causes extracellular polymeric substances (EPS) to fall off the surface of sludge; Secondly, this faster and directly makes bacteria cells affected by bio-acidification and bio-oxidation. In this case, the cells could be more easily destroyed by the combined ultrasonic and bioleaching treatment, compared with individual bioleaching treatment; As a result, stronger dewaterability and more removal rates of ARGs were achieved under the combined treatment. The economic analyses showed that the combined ultrasonic and bioleaching treatment is a more practical and economical technique for achieving deep dewatering of sludge.

Activated Sludge Microbial Community and Treatment Performance of Wastewater Treatment Plants in Industrial and Municipal Zones

Controlling wastewater pollution from centralized industrial zones is important for reducing overall water pollution. Microbial community structure and diversity can adversely affect wastewater treatment plant (WWTP) performance and stability. Therefore, we studied microbial structure, diversity, and metabolic functions in WWTPs that treat industrial or municipal wastewater. Sludge microbial community diversity and richness were the lowest for the industrial WWTPs, indicating that industrial influents inhibited bacterial growth. The sludge of industrial WWTP had low Nitrospira populations, indicating that influent composition affected nitrification and denitrification. The sludge of industrial WWTPs had high metabolic functions associated with xenobiotic and amino acid metabolism. Furthermore, bacterial richness was positively correlated with conventional pollutants (e.g., carbon, nitrogen, and phosphorus), but negatively correlated with total dissolved solids. This study was expected to provide a more comprehensive understanding of activated sludge microbial communities in full-scale industrial and municipal WWTPs.