Immobilization of esterase SulE in cross-linked gelatin/chitosan and its application in remediating soils polluted with tribenuron-methyl and metsulfuron-methyl

Enhanced catalytic performance of penicillin G acylase by covalent immobilization onto functionally-modified magnetic Ni0.4Cu0.5Zn0.1Fe2O4 nanoparticles

With the emergence of penicillin resistance, the development of novel antibiotics has become an urgent necessity. Semi-synthetic penicillin has emerged as a promising alternative to traditional penicillin. The demand for the crucial intermediate, 6-aminopicillanic acid (6-APA), is on the rise. Enzyme catalysis is the primary method employed for its production. However, due to certain limitations, the strategy of enzyme immobilization has also gained prominence. The magnetic Ni0.4Cu0.5Zn0.1Fe2O4 nanoparticles were successfully prepared by a rapid-combustion method. Sodium silicate was used to modify the surface of the Ni0.4Cu0.5Zn0.1Fe2O4 nanoparticles to obtain silica-coated nanoparticles (Ni0.4Cu0.5Zn0.1Fe2O4-SiO2). Subsequently, in order to better crosslink PGA, the nanoparticles were modified again with glutaraldehyde to obtain glutaraldehyde crosslinked Ni0.4Cu0.5Zn0.1Fe2O4-SiO2-GA nanoparticles which could immobilize the PGA. The structure of the PGA protein was analyzed by the PyMol program and the immobilization strategy was determined. The conditions of PGA immobilization were investigated, including immobilization time and PGA concentration. Finally, the enzymological properties of the immobilized and free PGA were compared. The optimum catalytic pH of immobilized and free PGA was 8.0, and the optimum catalytic temperature of immobilized PGA was 50°C, 5°C higher than that of free PGA. Immobilized PGA in a certain pH and temperature range showed better catalytic stability. Vmax and Km of immobilized PGA were 0.3727 μmol·min-1 and 0.0436 mol·L-1, and the corresponding free PGA were 0.7325 μmol·min-1 and 0.0227 mol·L-1. After five cycles, the immobilized enzyme activity was still higher than 25%.

Design of biomass-based renewable materials for environmental remediation

Various materials have been used to remove environmental contaminants for decades and have been an effective strategy for environmental cleanups. The current nonrenewable materials used for this purpose could impose secondary hazards and challenges in further downstream treatments. Biomass-based materials present viable, renewable, and sustainable solutions for environmental remediation. Recent biotechnology advances have developed biomaterials with new capacities, such as highly efficient biodegradation and treatment train integration. This review systemically discusses how biotechnology has empowered biomass-derived and bioinspired materials for environmental remediation sustainably and cost-effectively.

Enzyme immobilization on biomass-derived carbon materials as a sustainable approach towards environmental applications

Enzymes with their environment-friendly nature and versatility have become highly important 'green tools' with a wide range of applications. Enzyme immobilization has further increased the utility and efficiency of these enzymes by improving their stability, reusability, and recyclability. Biomass-derived matrices when used for enzyme immobilization offer a sustainable solution to environmental pollution and fuel depletion at low costs. Biochar and other biomass-derived carbon materials obtained are suitable for the immobilization of enzymes through different immobilization strategies. Environmental pollution has become an utmost topic of research interest due to an ever-increasing trend being observed in anthropogenic activities. This has widely contributed to the release of various toxic effluents into the environment in their native or metabolized forms. Therefore, more focus is being directed toward the utilization of immobilized enzymes in the bioremediation of water and soil, biofuel production, and other environmental applications. In this review, up-to-date literature concerning the immobilization and potential uses of enzymes immobilized on biomass-derived carbon materials has been presented.

A Novel Pathway of Chlorimuron-Ethyl Biodegradation by Chenggangzhangella methanolivorans Strain CHL1 and Its Molecular Mechanisms

Chlorimuron-ethyl is a widely used herbicide in agriculture. However, uncontrolled chlorimuron-ethyl application causes serious environmental problems. Chlorimuron-ethyl can be effectively degraded by microbes, but the underlying molecular mechanisms are not fully understood. In this study, we identified the possible pathways and key genes involved in chlorimuron-ethyl degradation by the Chenggangzhangella methanolivorans strain CHL1, a Methylocystaceae strain with the ability to degrade sulfonylurea herbicides. Using a metabolomics method, eight intermediate degradation products were identified, and three pathways, including a novel pyrimidine-ring-opening pathway, were found to be involved in chlorimuron-ethyl degradation by strain CHL1. Transcriptome sequencing indicated that three genes (atzF, atzD, and cysJ) are involved in chlorimuron-ethyl degradation by strain CHL1. The gene knock-out and complementation techniques allowed for the functions of the three genes to be identified, and the enzymes involved in the different steps of chlorimuron-ethyl degradation pathways were preliminary predicted. The results reveal a previously unreported pathway and the key genes of chlorimuron-ethyl degradation by strain CHL1, which have implications for attempts to enrich the biodegradation mechanism of sulfonylurea herbicides and to construct engineered bacteria in order to remove sulfonylurea herbicide residues from environmental media.

Whole-Genome Sequencing of a Chlorimuron-Ethyl-Degrading Strain: Chenggangzhangella methanolivorans CHL1 and Its Degrading Enzymes

Chlorimuron-ethyl is a commonly used sulfonylurea herbicide, and its long-term residues cause serious environmental problems. Biodegradation of chlorimuron-ethyl is effective and feasible, and many degrading strains have been obtained, but still, the genes and enzymes involved in this degradation are often unclear. In this study, whole-genome sequencing was performed on chlorimuron-ethyl-degrading strain, Chenggangzhangella methanolivorans CHL1. The complete genome of strain CHL1 contains one circular chromosome of 5,542,510 bp and a G+C content of 68.17 mol%. Three genes, sulE, pnbA, and gst, were predicted to be involved in the degradation of chlorimuron-ethyl, and this was confirmed by gene knockout and gene complementation experiments. The three genes were cloned and expressed in Escherichia coli BL21 (DE3) to allow for the evaluation of the catalytic activities of the respective enzymes. The glutathione-S-transferase (GST) catalyzes the cleavage of the sulfonylurea bridge of chlorimuron-ethyl, and the esterases, PnbA and SulE, both de-esterify it. This study identifies three key functional genes of strain CHL1 that are involved in the degradation of chlorimuron-ethyl and also provides new approaches by which to construct engineered bacteria for the bioremediation of environments polluted with sulfonylurea herbicides. IMPORTANCE Chlorimuron-ethyl is a commonly used sulfonylurea herbicide, worldwide. However, its residues in soil and water have a potent toxicity toward sensitive crops and other organisms, such as microbes and aquatic algae, and this causes serious problems for the environment. Microbial degradation has been demonstrated to be a feasible and promising strategy by which to eliminate xenobiotics from the environment. Many chlorimuron-ethyl-degrading microorganisms have been reported, but few studies have investigated the genes and enzymes that are involved in the degradation. In this work, two esterase-encoding genes (sulE, pnbA) and a glutathione-S-transferase-encoding gene (gst) responsible for the detoxification of chlorimuron-ethyl by strain Chenggangzhangella methanolivorans CHL1 were identified, then cloned and expressed in Escherichia coli BL21 (DE3). These key chlorimuron-ethyl-degrading enzymes are candidates for the construction of engineered bacteria to degrade this pesticide and enrich the resources for bioremediating environments polluted with sulfonylurea herbicides.

Biodegradation and Subsequent Toxicity Reduction of Co-contaminants Tribenuron Methyl and Metsulfuron Methyl by a Bacterial Consortium B2R

AllyMax is a widely used herbicide formulation in wheat-rice cropping areas of the world. The residues of its active ingredients, tribenuron methyl (TBM) and metsulfuron methyl (MET), persist in soil and water as co-contaminants, and cause serious threats to nontarget organisms. This study was performed to assess the potential of a bacterial consortium for the degradation and detoxification of TBM and MET individually and as co-contaminants. A bacterial consortium (B2R), comprising Bacillus cereus SU-1, Bacillus velezensis OS-2, and Rhodococcus rhodochrous AQ1, capable of degrading TBM and MET in liquid cultures was developed. Biodegradation of TBM and MET was optimized using the Taguchi design of experiment. Optimum degradation of both TBM and MET was obtained at pH 7 and 37 °C. Regarding media composition, optimum degradation of TBM and MET was obtained in minimal salt medium (MSM) supplemented with glucose, and MSM without glucose, respectively. The consortium simultaneously degraded TBM and MET (94.8 and 80.4%, respectively) in cultures containing the formulation AllyMax, where TBM and MET existed as co-contaminants at 2.5 mg/L each. Mass spectrometry analysis confirmed that during biodegradation, TBM and MET were metabolized into simpler compounds. Onion (Allium cepa) root inhibition and Comet assays revealed that the bacterial consortium B2R detoxified TBM and MET separately and as co-contaminants. The consortium B2R can potentially be used for the remediation of soil and water co-contaminated with TBM and MET.

Impact of Chitosan on Water Stability and Wettability of Soils

Chitosan has become increasingly applied in agriculture worldwide, thus entering the soil environment. We hypothesized that chitosan should affect the water stability of soil. Since this problem has not been studied to date, we examined, for the first time, the influence of chitosan on the water stability and wettability of soil aggregates. The aggregates were prepared from four soils with various properties amended with different amounts of two kinds of powdered chitosan, and subjected to 1 and/or 10 wetting–drying cycles. The water stability was measured by monitoring air bubbling after aggregate immersion in water, and the wettability was measured by a water drop penetration test. The biopolymer with a lower molecular mass, lower viscosity, and higher degree of deacetylation was more effective in increasing the water stability of the soil than the biopolymer with a higher molecular mass, higher viscosity, and lower deacetylation degree. After a single wetting-drying cycle, the water stability of the soil aggregates containing chitosan with a higher molecular mass was generally lower than that of the soil; after ten wetting–drying cycles, the water stability increased 1.5 to 20 times depending on the soil. The addition of low-molecular-mass chitosan after a single wetting-drying cycle caused the water stability to become one to two hundred times higher than that of the soil. A trial to find out which soil properties (pH, C and N content, bulk density, porosity, and particle size distribution) are responsible for the effectiveness of chitosan action was not successful, and this will be the objective of further studies.

Myco-remediation of Chlorinated Pesticides: Insights Into Fungal Metabolic System

Synthetic chemicals including organochlorine pesticides pose environment and health hazard due to persistent and bio-accumulation property. Majority of them are recognized as endocrine disruptors. Fungi are ubiquitous in nature and employs efficient enzymatic machinery for the biotransformation and degradation of toxic, recalcitrant pollutants. This review critically discusses the organochlorine biotransformation process mediated by fungi and highlights the role of enzymatic system responsible for biotransformation, especially distribution of dehalogenase homologs among fungal classes. It also explores the potential use of fungal derived biomaterial, mainly chitosan as an adsorbing biomaterial for pesticides and heavy metals removal. Further, prospects of employing fungus to over-come the existing bioremediation limitations are discussed. The study highlights the potential scope of utilizing fungi for initial biotransformation purposes, preceding final biodegradation by bacterial species under environmental conditions.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-021-00940-8.