Long-term continuous partial nitritation-anammox reactor aeration optimization at different nitrogen loading rates for the treatment of ammonium rich digestate lagoon supernatant

Using an innovative umbrella-shape membrane module to improve MBR for PN-ANAMMOX process

Membrane fouling has been a key factor limiting the applications of membrane bioreactor (MBR). In this study, a novel umbrella-shape membrane module was applied to construct two MBRs for two-stage partial nitrification-anaerobic ammonia oxidation (PN-ANAMMOX) process. After 55 days operation, the ANAMMOX process was started and the PN process was well controlled. Then, the ANAMMOX and PN process were successfully coupled to run the PN-ANAMMOX process. On 103 days, the best nitrogen removing effect was achieved with the maximum nitrogen loading rate (NLR) of 0.4 kg N·(m³·d)^-1 and the corresponding maximum total nitrogen removal rate (TNRR) of 75.23%. The umbrella-shape membrane module in both reactors only needed to be cleaned once during the operation for 105 days, indicating that the membrane module had better resistance to membrane fouling. The functional bacteria were cultivated in suspension state; moreover, the cell densities of ammonia oxidizing bacteria (AOB) and ANAMMOX bacteria (AnAOB) reached 58.32 × 10¹² copies/g sludge and 28.39 × 10¹² copies/g sludge. Their abundances reached 73.25% and 57.80% of the total bacteria, respectively. MBR improved by umbrella-shape membrane module could realize the rapid start-up of ANAMMOX process, effective control of PN process, and stable operation of PN-ANAMMOX process. This study provided a novel approach to control membrane fouling by optimizing the membrane module shape and widened applications of MBRs in PN-ANAMMOX process.

Integrating conventional nitrogen removal with anammox in wastewater treatment systems: Microbial metabolism, sustainability and challenges

The various forms of nitrogen (N), including ammonium (NH₄⁺), nitrite (NO₂^-), and nitrate (NO₃^-), present in wastewaters can create critical biotic stress and can lead to hazardous phenomena that cause imbalances in biological diversity. Thus, biological nitrogen removal (BNR) from wastewaters is considered to be imperatively urgent. Therefore, anammox-based systems, i.e. partial nitrification and anaerobic ammonium oxidation (PN/anammox) and partial denitrification and anammox (PD/anammox) have been universally acknowledged to consider as alternatives, promising and cost-effective technologies for sustainable N removal from wastewaters compared to nitrification-denitrification processes. This review comprehensively presents and discusses the latest advances in BNR technologies, including traditional nitrification-denitrification and anammox-based systems. To a deep understanding of a better-controlled combining anammox with traditional processes, the microbial community diversity and metabolism, as well as, biomass morphological characteristics were clearly reviewed in the anammox-based systems. Explaining simultaneous microbial competition and control of crucial operation parameters in single-stage anammox-based processes in terms of optimization and economic benefits makes this contribution a different vision from available review papers. The most important sustainability indicators, including global warming potential (GWP), carbon footprint (CF) and energy behaviours were explored to evaluate the sustainability of BNR processes in wastewater treatment. Additionally, the challenges and solutions for BNR processes are extensively discussed. In summary, this review helps facilitate a critical understanding of N removal technologies. It is confirmed that sustainability and saving energy would be achieved by anammox-based systems, thereby could be encouraged future outcomes for a sustainable N removal economy.

Performance evaluation and model-based optimization of the mainstream deammonification in an integrated fixed-film activated sludge reactor

This study aimed to model and optimize mainstream deammonification in an integrated fixed-film activated sludge (IFAS) pilot plant under natural seasonal temperature variations. The effect of gradually decreasing temperature on the performance was evaluated during a winter season and a transition period to summer conditions, and the correlation of the performance parameters was investigated using principal component analysis (PCA). The optimization of intermittent aeration in the long-term (30 days) dynamic conditions with on/off ratio and dissolved oxygen (DO) set-point control was used to maximize the N-removal rate (NRR) and N-removal efficiency (NRE). Optimization results (DO set-point of 0.2-0.25 mgO₂/L, and on/off ratio of 0.05) increased the NRE and NRR of total inorganic N (daily average) from 30% to > 50% and 15 gN/m³d to 25 gN/m³d, respectively. This novel long-term optimization strategy is a powerful tool for enhancing the efficiency in mainstream deammonification.

Comparison of the Efficiency of Deammonification under Different DO Concentrations in a Laboratory-Scale Sequencing Batch Reactor

The efficiency of deammonification depends on the cooperation of ammonium oxidizing bacteria and archaea (AOB/AOA), anaerobic ammonium oxidizing bacteria (AnAOB) and the effective suppression of nitrite oxidizing bacteria (NOB) that compete with AnAOB for nitrite (NO2-N). One of the effective NOB suppression strategies is intermittent aeration. However, it is important to have a good understanding of the optimum dissolved oxygen (DO) value in the aeration period and optimize the non-aeration time used during the reaction phase. This study comprised the investigation of the effect of different DO set points (0.4, 0.7, 1.0 and 1.5 mg O2/L) under the same aeration length off/on (12/3 min). Moreover, three different intermittent aeration modes (9/3, 6/3, 3/3) under the same DO set point (0.7 mg O2/L) were more investigated. The experiment was conducted for 6 months (180 days) in a laboratory-scale sequencing batch reactor (SBR) with a working volume of 10 L. The results indicated that a high N removal efficiency was achieved 74% at the DO set point = 0.7 mg O2/L during aeration strategy off/on (6/3 min) due to the low nitrate production rate (NPR) 0.9 mg N/g VSS/h and high ammonium utilization rate (AUR) 13 mg N/g VSS/h (NPR/AUR = 0.06). Mathematical modeling results confirmed that the feasible DO set point 0.7 and intermittent aeration mode off/on (6/3 min) were especially suitable for the optimal balance between the NOB suppression and keeping high activities of AOB and anammox in the system.