Structure and integrity of sequentially extracted lignin during poplar (alkaline) pretreatment

Fabrication of PVA-Silica Sol Wood Composites via Delignification and Freezing Pretreatment

The efficient exploitation of planted fast-growing wood is crucial for enhancing wood resource utilization. In this study, the fast-growing poplar wood was modified by in situ impregnation through vacuum impregnation with polyvinyl alcohol and nano-silica sol as impregnation modifiers, combined with delignification-freezing pretreatment. The samples were characterized by FTIR, XRD, SEM, and the universal mechanical testing machine. The results showed that the wrinkle deformation and cracking of the wood blocks were greatly alleviated after the delignification-freezing pretreatment and the polyvinyl alcohol and nano-silica sol were successfully integrated into the wood. The resulting polyvinyl alcohol-silica sol poplar composites exhibited about 216%, 80% and 43% higher compressive strength with respect to delignified wood, natural wood and impregnated natural wood, respectively, thereby demonstrating superior mechanical properties and potential opportunities for value-added and efficient utilization of low-quality wood.

Unraveling interplay between lignocellulosic structures caused by chemical pretreatments in enhancing enzymatic hydrolysis

To investigate the interplay between substrate structure and enzymatic hydrolysis (EH) efficiency, poplar was pretreated with acidic sodium-chlorite (ASC), 3 % sodium-hydroxide (3-SH), and 3 % sulfuric acid (3-SA), resulting in different glucose yields of 94.10 %, 74.35 %, and 24.51 %, respectively, of pretreated residues. Residues were fractionated into cellulose, lignin and unhydrolyzed residue after EH (for lignin-carbohydrate complex (LCC) analysis) and analyzed using HPLC, FTIR, XPS, CP MAS 13C NMR and 2D-NMR (Lignin and LCC analysis). After delignification, holocellulose exhibited a dramatic increase in glucose yield (74.35 % to 90.82 % for 3-SH and 24.51 % to 80.0 % for 3-SA). Structural analysis of holocellulose suggested the synergistic interplay among cellulose allomorphs to limit glucose yield. Residual lignin analysis from un/pretreated residues indicated that higher β-β' contents and S/G ratios were favorable to the inhibitory effect but unfavourable to the holocellulose digestibility and followed the trend in the following order: 3-SA (L3) > 3-SH (L2) > native-lignin (L1). Analysis of enzymatically unhydrolyzed pretreated residues revealed the presence of benzyl ether (BE1,2) LCC and phenyl glycoside (PG) bond linking to xylose (X) and mannose (M), which yielded a xylan-lignin-glucomannan network. The stability, steric hindrance and hydrophobicity of this network may play a central role in defining poplar recalcitrance.

Unrevealing the influence of reagent properties on disruption and digestibility of lignocellulosic biomass during alkaline pretreatment

Beyond the conventional consideration of pretreatment severity (PS) responsible for biomass disruption, the influence of reagent properties on biomass (LCB) disruption is often overlooked. To investigate the LCB disruption as a function of reagent properties, reagents with distinct cations (NaOH and KOH) and significantly higher delignification potential were chosen. NaOH solution (3 % w/v) with a measured pH of 13.05 ± 0.01 is considered the reference, against which a KOH solution (pH = 13.05 ± 0.01) was prepared for LCB pretreatment under the same PS. Despite comparable lignin content, varying glucose yield of NaOH (68.76 %) and KOH (46.88 %) pretreated residues indicated the presence of heterogeneously disrupted substrate. Holocellulose extracted from raw poplar (ASC, control) and alkaline pretreated residues (C-NaOH and C-KOH) were analyzed using HPLC, XRD, SEM, TGA/DTG, XPS, and 13CP MAS NMR to investigate the pretreatment-induced structural modification. Results revealed that, despite the same pretreatment severity, better disruption in C-NaOH (higher accessible fibril surface and less-ordered region) leading to higher digestibility than C-KOH, likely due to the smaller ionic radius of Na+, facilitates better penetration into dense LCB matrix. This study elucidates the importance of considering the reagent properties during LCB pretreatment, eventually enhancing consciousness while selecting reagents for efficient LCB utilization.