Sodium alginate nanofibers loaded Terminalia catappa scaffold regulates intrinsic apoptosis signaling in skin melanoma cancer

Synthesis of novel thiazoles bearing lupeol derivatives as potent anticancer and anti-inflammatory agents

Lupeol is one of the most important metabolite in the class of terpenoids and possess excellent anticancer, anti-inflammatory, anti-diabetic activities etc. In the present study, the different thiazoles and oxazoles bearing lupeol derivatives were prepared to enhance their biological activity. Initially, the in vitro cytotoxic activity results showed that the synthesized lupeol derivatives (9a-9j and 10a-10e) showed significant activity against various cancer cells and the compounds 9h and 10b exhibited excellent activity against CAL27 cells. Further, these compounds 9h and 10b arrest the cell cycle at S phase and induce the late apoptosis in CAL27 cells by downregulating the BcL2 and vimentin expression and upregulating the Bax gene expression. Moreover, the lupeol derivatives showed dose-dependent anti-inflammatory activity by inhibiting the secretion of IL-6 cytokines in LPS-induced Raw 264.7 cells. Together, these results clearly indicated that the thiazoles and oxazoles bearing lupeol derivatives can used as chemotherapeutic drugs against cancer and inflammatory diseases.

Repurposing of Antifungal Drug Flucytosine/Flucytosine Cocrystals for Anticancer Activity against Prostate Cancer Targeting Apoptosis and Inflammatory Signaling Pathways

This study aimed to repurpose the antifungal drug flucytosine (FCN) for anticancer activity together with cocrystals of nutraceutical coformers sinapic acid (SNP) and syringic acid (SYA). The cocrystal screening experiments with SNP resulted in three cocrystal hydrate forms in which two are polymorphs, namely, FCN-SNP F-I and FCN-SNP F-II, and the third one with different stoichiometry in the asymmetric unit (1:2:1 ratio of FCN:SNP:H2O, FCN-SNP F-III). Cocrystallization with SYA resulted in two hydrated cocrystal polymorphs, namely, FCN-SYA F-I and FCN-SYA F-II. All the cocrystal polymorphs were obtained concomitantly during the slow evaporation method, and one of the polymorphs of each system was produced in bulk by the slurry method. The interaction energy and lattice energies of all cocrystal polymorphs were established using solid-state DFT calculations, and the outcomes correlated with the experimental results. Further, the in vitro cytotoxic activity of the cocrystals was determined against DU145 prostate cancer and the results showed that the FCN-based cocrystals (FCN-SNP F-III and FCN-SYA F-I) have excellent growth inhibitory activity at lower concentrations compared with parent FCN molecules. The prepared cocrystals induce apoptosis by generating oxidative stress and causing nuclear damage in prostate cancer cells. The Western blot analysis also depicted that the cocrystals downregulate the inflammatory markers such as NLRP3 and caspase-1 and upregulate the intrinsic apoptosis signaling pathway marker proteins, such as Bax, p53, and caspase-3. These findings suggest that the antifungal drug FCN can be repurposed for anticancer activity.

Trends in the Incorporation of Antiseptics into Natural Polymer-Based Nanofibrous Mats

Nanofibrous materials represent a very promising form of advanced carrier systems that can be used industrially, especially in regenerative medicine as highly functional bandages, or advanced wound dressings. By incorporation of antimicrobial additives directly into the structure of the nanofiber carrier, the functionality of the layer is upgraded, depending on the final requirement-bactericidal, bacteriostatic, antiseptic, or a generally antimicrobial effect. Such highly functional nanofibrous layers can be prepared mostly by electrospinning technology from both synthetic and natural polymers. The presence of a natural polymer in the composition is very advantageous. Especially in medical applications where, due to the presence of the material close to the human body, the healing process is more efficient and without the occurrence of an unwanted inflammatory response. However, converting natural polymers into nanofibrous form, with a homogeneously distributed and stable additive, is a great challenge. Thus, a combination of natural and synthetic materials is often used. This review clearly summarizes the issue of the incorporation and effectiveness of different types of antimicrobial substances, such as nanoparticles, antibiotics, common antiseptics, or substances of natural origin, into electrospun nanofibrous layers made of mostly natural polymer materials. A section describing the problematic aspects of antimicrobial polymers is also included.

Application of Electrospun Drug-Loaded Nanofibers in Cancer Therapy

In the 21st century, chemotherapy stands as a primary treatment method for prevalent diseases, yet drug resistance remains a pressing challenge. Utilizing electrospinning to support chemotherapy drugs offers sustained and controlled release methods in contrast to oral and implantable drug delivery modes, which enable localized treatment of distinct tumor types. Moreover, the core-sheath structure in electrospinning bears advantages in dual-drug loading: the core and sheath layers can carry different drugs, facilitating collaborative treatment to counter chemotherapy drug resistance. This approach minimizes patient discomfort associated with multiple-drug administration. Electrospun fibers not only transport drugs but can also integrate metal particles and targeted compounds, enabling combinations of chemotherapy with magnetic and heat therapies for comprehensive cancer treatment. This review delves into electrospinning preparation techniques and drug delivery methods tailored to various cancers, foreseeing their promising roles in cancer treatment.

Synthesis of ring-A modified lupeol derivatives and their anti-proliferative activity: identification of potent lead active against MCF-7 breast cancer cells

In continuation of our research program aimed at the development of new natural product-based anticancer agents, a series of lupeol derivatives (5a-5k and 6a-6i) were prepared with the introduction of aryl functionalities and amino acids at C-3 position. All the synthesised derivatives were assessed for in vitro anticancer activity against four human cancer cell lines using MTT assay. Interestingly, the compounds 5j, 5k, and 6 g showed potent activity against MCF7 cells as compared with the parent compound. Further, the flowcytometry analysis revealed that the 5j,5k, and 6 g arrest the cells at the G2/M phase and induce the early apoptosis in MCF7 cells. In addition, the selected compounds inhibit the BcL2 expression and increase the Bax protein expression in MCF7 cells. Overall, these results indicated that the lupeol derivatives could serve as a promising launch point for the development of anticancer agents.

Synthesis of aminomethyl linked (+)-usnic acid derivatives via the Mannich reaction and evaluation of their biological activities

(+)-Usnic acid (UA), a natural dibenzofuran derivative, abundantly produced by lichens and possess wide number of biomedical applications including antibacterial, anti-inflammatory, anti-oxidant and anticancer activities. In the present study, as series of usnic acid derivatives (3a-3i) were synthesised using Mannich reaction assessed for their antioxidant, α-glucosidase, and anticancer activities. The in vitro antioxidant activity showed that compound 3d displayed potent antioxidant activity by scavenging the activities of DPPH and ABTS+. The compounds 3d and 3e showed potent cytotoxic activity against HepG2 cancer cells by arresting the cell cycle at S phase and regulating the Bax/BcL2 expression and subsequently induce the apoptosis. Overall, the results clearly indicated that (+)-usnic acid derivatives bearing secondary amines are useful scaffolds for the development of drug candidates for treatment of oxidative stress mediated cancer and metabolic disorders.

Evolving Trends in Nanofibers for Topical Delivery of Therapeutics in Skin Disorders

Nanotechnology has yielded nanostructure-based drug delivery approaches, among which nanofibers have been explored and researched for the potential topical delivery of therapeutics. Nanofibers are filaments or thread-like structures in the nanometer size range that are fabricated using various polymers, such as natural or synthetic polymers or their combination. The size or diameter of the nanofibers depends upon the polymers, the techniques of preparation, and the design specification. The four major processing techniques, phase separation, self-assembly, template synthesis, and electrospinning, are most commonly used for the fabrication of nanofibers. Nanofibers have a unique structure that needs a multimethod approach to study their morphology and characterization parameters. They are gaining attention as drug delivery carriers, and the substantially vast surface area of the skin makes it a potentially promising strategy for topical drug products for various skin disorders such as psoriasis, skin cancers, skin wounds, bacterial and fungal infections, etc. However, the large-scale production of nanofibers with desired properties remains challenging, as the widely used electrospinning processes have certain limitations, such as poor yield, use of high voltage, and difficulty in achieving in situ nanofiber deposition on various substrates. This review highlights the insights into fabrication strategies, applications, recent clinical trials, and patents of nanofibers for different skin disorders in detail. Additionally, it discusses case studies of its effective utilization in the treatment of various skin disorders for a better understanding for readers.

A Sustainable Solution to Skin Diseases: Ecofriendly Transdermal Patches

Skin is the largest epithelial surface of the human body, with a surface area of 2 m2 for the average adult human. Being an external organ, it is susceptible to more than 3000 potential skin diseases, including injury, inflammation, microbial and viral infections, and skin cancer. Due to its nature, it offers a large accessible site for administrating several medications against these diseases. The dermal and transdermal delivery of such medications are often ensured by utilizing dermal/transdermal patches or microneedles made of biocompatible and biodegradable materials. These tools provide controlled delivery of drugs to the site of action in a rapid and therapeutically effective manner with enhanced diffusivity and minimal side effects. Regrettably, they are usually fabricated using synthetic materials with possible harmful environmental effects. Manufacturing such tools using green synthesis routes and raw materials is hence essential for both ecological and economic sustainability. In this review, natural materials including chitosan/chitin, alginate, keratin, gelatin, cellulose, hyaluronic acid, pectin, and collagen utilized in designing ecofriendly patches will be explored. Their implementation in wound healing, skin cancer, inflammations, and infections will be discussed, and the significance of these studies will be evaluated with future perspectives.