Biomedical applications and colloidal properties of amphiphilically modified chitosan hybrids

Carboxymethyl chitosan-N-alkylimine derivatives: Synthesis, characterization and use for preservation of symbiotic biofertilizer bacteria on chickpea seeds

A series of carboxymethyl chitosan-N-alkylimine derivatives with side chain length of 4 to 10 carbons (CMCS-n, n = 4, 6, 8, 10) was prepared in a one-step solvent-free synthesis using Schiff base chemistry. The modified polysaccharides were characterized by their spectral, thermal and physical properties. The prepared polymers demonstrated an ability to spontaneous self-assembly with a clear correlation between critical aggregation concentration and the chain length of the alkyl substituent. N-alkylimine-CMCS derivatives were found to deliver hydrophobic (curcumin) and hydrophilic (ascorbic acid) active agents in unfavorable environments of water and oil, respectively. Then, N-alkylimine-CMCS derivatives were used as a platform for the delivery of symbiotic gram-positive bacteria Bacillus subtilis CJ onto chickpea seeds. These bacteria demonstrated a significantly higher survival rate (106 CFU/mL) in dried CMCS-6 derivative film than in other films tested. The seeds treated with N-alkylimine-CMCS coatings that contained B. subtilis CJ demonstrated up to 100-fold increase of this bacterial population on the seedlings in comparison to the pristine CMCS.

Triphenylphosphine Derivatives of Allylbenzenes Express Antitumor and Adjuvant Activity When Solubilized with Cyclodextrin-Based Formulations

Allylbenzenes (apiol, dillapiol, myristicin and allyltetramethoxybenzene) are individual components of plant essential oils that demonstrate antitumor activity and can enhance the antitumor activity of cytotoxic drugs, such as paclitaxel, doxorubicin, cisplatin, etc. Triphenylphosphine (PPh3) derivatives of allylbenzenes are two to three orders of magnitude more potent than original allylbenzenes in terms of IC50. The inhibition of efflux pumps has been reported for allylbenzenes, and the PPh3 moiety is deemed to be responsible for preferential mitochondrial accumulation and the depolarization of mitochondrial membranes. However, due to poor solubility, the practical use of these substances has never been an option. Here, we show that this problem can be solved by using a complex formation with cyclodextrin (CD-based molecular containers) and polyanionic heparin, stabilizing the positive charge of the PPh3 cation. Such containers can solubilize both allylbenzenes and their PPh3 derivatives up to 0.4 mM concentration. Furthermore, we have observed that solubilized PPh3 derivatives indeed work as adjuvants, increasing the antitumor activity of paclitaxel against adenocarcinomic human alveolar basal epithelial cells (A549) by an order of magnitude (in terms of IC50) in addition to being quite powerful cytostatics themselves (IC50 in the range 1-10 µM). Even more importantly, CD-solubilized PPh3 derivatives show pronounced selectivity, being highly toxic for the A549 tumor cell line and minimally toxic for HEK293T non-tumor cells, red blood cells and sea urchin embryos. Indeed, in many cancers, the mitochondrial membrane is more prone to depolarization compared to normal cells, which probably explains the observed selectivity of our compounds, since PPh3 derivatives are known to act as mitochondria-targeting agents. According to the MTT test, 100 µM solution of PPh3 derivatives of allylbenzenes causes the death of up to 85% of A549 cancer cells, while for HEK293T non-cancer cells, only 15-20% of the cells died. The hemolytic index of the studied substances did not exceed 1%, and the thrombogenicity index was < 1.5%. Thus, this study outlines the experimental foundation for developing combined cytostatic medications, where effectiveness and selectivity are achieved through decreased concentration of the primary ingredient and the inclusion of adjuvants, which are safe or practically harmless substances.

Covalent Conjugates of Allylbenzenes and Terpenoids as Antibiotics Enhancers with the Function of Prolonged Action

The drug resistance of pathogenic bacteria is often due efflux pumps-specific proteins that remove foreign compounds from bacterial cells. To overcome drug resistance, adjuvants are often used that can inhibit efflux pumps or other systems that ensure the resistance of bacteria to the action of antibiotics. We assumed that a new level of effectiveness with the use of an antibiotic + an adjuvant pair could be achieved by their joint delivery into the pathogen. To test this hypothesis, we constructed a series of molecular carriers based on poly-(olygo-, dendry)mers based on cyclodextrin-grafted PEI or mannan, as well as glycol chitosan, covalently bound to antibiotic, adjuvant, and the oligosaccharide ligand to the macrophage mannose receptor (CD206), which we studied earlier and showed high efficiency and selectivity of delivery of a therapeutic "cargo" to macrophages. Moxifloxacin was used as an antibiotic, and terpenoid and allylbenzene compounds were used as adjuvants, for which we previously discovered the ability to inhibit bacterial efflux pumps. We show that: (a) the resulting structures were stable in vitro for a long time (up to 10 days); (b) they were adsorbed on bacterial cells, providing a local increase in the concentration of the antibiotic and adjuvant in pathogen cells; (c) they were internalized by bacterial cells, ensuring the accumulation of both antibiotic and adjuvant inside bacterial cells; (d) the adjuvant, after entering the bacterial cell, provided inhibition of the efflux pumps; (e) due to this action of the adjuvant, combined with the targeted delivery by the carrier, the antibiotic's half-life in rats increased by more than 2 times, the effective concentration of the drug in the blood plasma (AUC) increased up to 8-10 times; (f) a significant increase in the effectiveness of the antibacterial action against Gram+ and Gram- cells was achieved (up to 3 times). Potentially, such an approach would significantly increase the effectiveness of therapies for a number of infectious and other diseases, reduce the dosage of antibiotics, shorten the duration of treatment, and reduce the risk of developing bacterial resistance. Moreover, the use of a polymer carrier with covalently bound organic molecules of different structures will avoid problems linked to different (suboptimal) solubility and bio-distribution of the administered molecules, which would be almost inevitable when using the same compounds separately. It would be very difficult to find antibiotic/adjuvant pairs that simultaneously achieve optimal concentrations in the same target cells. In our case, terpenoids and alkylbenzenes used as adjuvants are practically insoluble as individual compounds, and their unacceptable pharmacological properties would not allow them to be used as efflux pump inhibitors.

Prevention of marine biofouling in the aquaculture industry by a coating based on polydimethylsiloxane-chitosan and sodium polyacrylate

In this study, a series of novel hydrophobic/hydrophilic hybrid (HHH) coatings with the feature of preventing the fouling phenomenon was fabricated based on polydimethylsiloxane (PDMS), as matrix and two hydrophilic polymers: chitosan and sodium polyacrylate, as dispersed phases. Antibacterial activity, pseudo-barnacle adhesion strength, surface free energy, water contact angle, and water absorption were performed for all samples. Evaluating field immersion of the samples was performed in the natural seawater. The results showed that the dispersed phase containing PDMS coatings showed simultaneously both of antibacterial activity and foul release behavior. Among the samples, the PCs4 coating containing 4 wt% Cs indicated the lowest pseudo barnacle adhesion strength (0.04 MPa), the lowest surface free energy (18.94 mN/m), the highest water contact angle (116.05°), and the percentage of fouling organisms 9.8 % after 30 days immersion. The HHH coatings can be considered as novel eco-friendly antifouling/foul release coatings for aquaculture applications.

Polymeric Micelles Formulation of Combretastatin Derivatives with Enhanced Solubility, Cytostatic Activity and Selectivity against Cancer Cells

Combretastatin derivatives is a promising class of antitumor agents, tubulin assembly inhibitors. However, due to poor solubility and insufficient selectivity to tumor cells, we believe, their therapeutic potential has not been fully realized yet. This paper describes polymeric micelles based on chitosan (a polycation that causes pH and thermosensitivity of micelles) and fatty acids (stearic, lipoic, oleic and mercaptoundecanoic), which were used as a carrier for a range of combretastatin derivatives and reference organic compounds, demonstrating otherwise impossible delivery to tumor cells, at the same time substantially reduced penetration into normal cells. Polymers containing sulfur atoms in hydrophobic tails form micelles with a zeta potential of about 30 mV, which increases to 40-45 mV when cytostatics are loaded. Polymers with tails of oleic and stearic acids form poorly charged micelles. The use of polymeric 400 nm micelles provides the dissolution of hydrophobic potential drug molecules. Micelles could significantly increase the selectivity of cytostatics against tumors, which has been shown using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, Fourier transform infrared (FTIR) spectroscopy, flow cytometry and fluorescence microscopy. Atomic force microscopy presented the difference between the unloaded micelles and those loaded with the drug: the size of the former was 30 nm on average, while the latter had a "disc-like" shape and a size of about 450 nm. The loading of drugs into the core of micelles was confirmed by UV and fluorescence spectroscopy methods; shifts of absorption and emission maxima into the long-wavelength region by tens of nm was observed. With FTIR spectroscopy, a high interaction efficiency of micelles with the drug on cells was demonstrated, but at the same time, selective absorption was observed: micellar cytostatics penetrate into A549 cancer cells 1.5-2 times better than the simple form of the drugs. Moreover, in normal HEK293T, the penetration of the drug is reduced. The proposed mechanism for reducing the accumulation of drugs in normal cells is the adsorption of micelles on the cell surface and the preservation of cytostatics to penetrate inside the cells. At the same time, in cancer cells, due to the structural features of the micelles, they penetrate inside, merging with the membrane and releasing the drug by pH- and glutathione-sensitive mechanisms. From a methodological point of view, we have proposed a powerful approach to the observation of micelles using a flow cytometer, which, in addition, allows us to quantify the cells that have absorbed/adsorbed cytostatic fluorophore and distinguish between specific and non-specific binding. Thus, we present polymeric micelles as drug delivery systems in tumors using the example of combretastatin derivatives and model fluorophore-cytostatic rhodamine 6G.

Achievement of the Selectivity of Cytotoxic Agents against Cancer Cells by Creation of Combined Formulation with Terpenoid Adjuvants as Prospects to Overcome Multidrug Resistance

Oncological diseases are difficult to treat even with strong drugs due to development the multidrug resistance (MDR) of cancer cells. A strategy is proposed to increase the efficiency and selectivity of cytotoxic agents against cancer cells to engage the differences in the morphology and microenvironment of tumor and healthy cells, including the pH, membrane permeability, and ion channels. Using this approach, we managed to develop enhanced formulations of cytotoxic agents with adjuvants (which are known as efflux inhibitors and as ion channel inhibitors in tumors)-with increased permeability in A549 and a protective effect on healthy HEK293T cells. The composition of the formulation is as follows: cytotoxic agents (doxorubicin (Dox), paclitaxel (Pac), cisplatin) + adjuvants (allylbenzenes and terpenoids) in the form of inclusion complexes with β-cyclodextrin. Modified cyclodextrins make it possible to obtain soluble forms of pure substances of the allylbenzene and terpenoid series and increase the solubility of cytotoxic agents. A comprehensive approach based on three methods for studying the interaction of drugs with cells is proposed: MTT test-quantitative identification of surviving cells; FTIR spectroscopy-providing information on the molecular mechanisms inaccessible to study by any other methods (including binding to DNA, surface proteins, or lipid membrane); confocal microscopy for the visualization of observed effects of Dox accumulation in cancer or healthy cells depending on the drug formulation as a direct control of the correctness of interpretation of the results obtained by the two other methods. We found that eugenol (EG) and apiol increase the intracellular concentration of cytostatic in A549 cells by 2-4 times and maintain it for a long time. However, an important aspect is the selectivity of the enhancing effect of adjuvants on tumor cells in relation to healthy ones. Therefore, the authors focused on adjuvant's effect on the control healthy cells (HEK293T): EG and apiol demonstrate "protective" properties from cytostatic penetration by reducing intracellular concentrations by about 2-3 times. Thus, a combined formulation of cytostatic drugs has been found, showing promise in the aspects of improving the efficiency and selectivity of antitumor drugs; thereby, one of the perspective directions for overcoming MDR is suggested.

Avocado peel extract loaded on chitosan nanoparticles alleviates urethane toxicity that causes lung cancer in a mouse model

Lung cancer progresses without obvious symptoms and is detected in most patients at late stages, causing a high rate of mortality. Avocado peels (AVP) were thought to be biowaste, but they have antioxidant and anticancer properties in vitro. Chitosan nanoparticles (Cs-NPs) were loaded with various plant extracts, increasing their in vitro and in vivo anticancer activities. Our goal was to load AVP onto Cs-NPs and determine the role of AVP-extract or AVP-loaded Cs-NPs in controlling the progression of lung cancer caused by urethane toxicity. The AVP-loaded chitosan nano-combination (Cs@AVP NC) was synthesized and characterized. Our in vitro results show that Cs@AVP NC has higher anticancer activity than AVP against three human cancer cell lines. The in vivo study proved the activation of apoptosis in lung cancer cells with the Cs@AVP NC oral treatment more than the AVP treatment. Additionally, Cs@AVP NC-treated animals showed significantly higher p53 and Bax-expression levels and lower NF-κB p65 levels in their lung tissues than in positive control animals. In conclusion, our study demonstrated the superior anticancer potency of Cs@AVP NC over AVP extract and its ability to inhibit lung cancer proliferation. Therefore, oral consumption of Cs@AVP NC might be a promising treatment for lung cancer.

Smart pH- and Temperature-Sensitive Micelles Based on Chitosan Grafted with Fatty Acids to Increase the Efficiency and Selectivity of Doxorubicin and Its Adjuvant Regarding the Tumor Cells

The main factors that determine the low effectiveness of chemotherapy are the low target bioavailability of antitumor drugs and the efflux process. In attempts to overcome this problem, several approaches are proposed here. Firstly, the development of polymeric micellar systems based on chitosan grafted by fatty acids (different types to optimize their properties), which, on the one hand, increase the solubility and bioavailability of cytostatics and, on the other hand, effectively interact with tumor cells due to the polycationic properties of chitosan, allowing for more effective penetration of cytostatic drugs into the cells. Secondly, the use of adjuvants-synergists of cytostatics (such as eugenol) included in the same micellar formulation-that selectively enhance the accumulation and retention of cytostatics in the tumor cells. pH- and temperature-sensitive polymeric micelles developed show high entrapment efficiency for both cytostatics and eugenol (EG) >60% and release the drug in a prolonged manner for 40 h in a weakly acidic medium corresponding to the microenvironment of tumors. In a slightly alkaline environment, the drug circulates longer (more than 60 h). The thermal sensitivity of micelles is realized due to an increase in the molecular mobility of chitosan, which undergoes a phase transition at 32-37 °C. The effect of the cytostatic drug doxorubicin (Dox) on cancerous A549 cells and model healthy cells of human embryonic renal epithelium (HEK293T) was studied by FTIR spectroscopy and fluorescence microscopy. Micellar Dox penetrates into cancer cells 2-3 times more efficiently when using EG adjuvant, which inhibits efflux, as demonstrated by a significant increase in the ratio of intra- and extracellular concentrations of the cytostatic. However, here it is worth remembering about healthy cells that they should not be damaged: according to changes in the FTIR and fluorescence spectra, the penetration of Dox into HEK293T when using micelles in combination with EG is reduced by 20-30% compared to a simple cytostatic. Thus, experimental developments of combined micellar cytostatic drugs have been proposed to increase the effectiveness of cancer treatment and overcome multiple drug resistance.

Insights on Some Polysaccharide Gel Type Materials and Their Structural Peculiarities

Global resources have to be used in responsible ways to ensure the world's future need for advanced materials. Ecologically friendly functional materials based on biopolymers can be successfully obtained from renewable resources, and the most prominent example is cellulose, the well-known most abundant polysaccharide which is usually isolated from highly available biomass (wood and wooden waste, annual plants, cotton, etc.). Many other polysaccharides originating from various natural resources (plants, insects, algae, bacteria) proved to be valuable and versatile starting biopolymers for a wide array of materials with tunable properties, able to respond to different societal demands. Polysaccharides properties vary depending on various factors (origin, harvesting, storage and transportation, strategy of further modification), but they can be processed into materials with high added value, as in the case of gels. Modern approaches have been employed to prepare (e.g., the use of ionic liquids as "green solvents") and characterize (NMR and FTIR spectroscopy, X ray diffraction spectrometry, DSC, electronic and atomic force microscopy, optical rotation, circular dichroism, rheological investigations, computer modelling and optimization) polysaccharide gels. In the present paper, some of the most widely used polysaccharide gels will be briefly reviewed with emphasis on their structural peculiarities under various conditions.

Synthesis, characterization and application of chitosan-N-(4-hydroxyphenyl)-methacrylamide derivative as a drug and gene carrier

The aim of this study was to develop a green method to fabricate a novel CS modified N-(4-hydroxyphenyl)- methacrylamide conjugate (CSNHMA) and to evaluate its biomedical potential. CSNHMA has been prepared by a simple method via aza Michael addition reaction between CS and N- (4-hydroxyphenyl)-methacrylamide (NHMA) in ethanol. Its structural and morphological properties were characterized by various analysis techniques. The obtained results confirmed that a highly porous network structure of CSNHMA was successfully synthesized via aza Michael addition reaction. Consequently, it was analyzed as a drug and gene carrier. CSNHMA/pGL3 showed an enhanced buffering capacity due to the presence of NHMA moiety leading to higher transfection efficiency in all cancer cells (A549, HeLa and HepG2) as compared to native CS and Lipofectamine®. Therefore, these findings clearly support the possibility of using CSNHMA as a good transfection agent. For in vitro drug release study, we prepared CSNHMA nanoparticles (NPs) and curcumin loaded CSNHMA NPs of size <230 nm respectively via the non-toxic ionic gelation route and the encapsulation efficiency of drug was found to be 77.03%. In vitro drug release studies demonstrated a faster and sustained release of curcumin loaded CSNHMA NPs at pH 5.0 compared to physiological pH.

Brij-functionalized chitosan nanocarrier system enhances the intestinal permeability of P-glycoprotein substrate-like drugs

The highly expressed P-glycoprotein (Pgp) in the intestine plays a key role in preventing drugs across the intestinal epithelium, which linked by tight junctions (TJs). Thus increasing the oral bioavailability of Pgp substrate-like drugs (PSLDs) remains a great challenge. Herein, we construct a nanocarrier system derived from Brij-grafted-chitosan (BC) to enhance the oral bioavailability and therapeutic effect of berberine (BBR, a typical PLSD) against diabetic kidney disease. The developed BC nanoparticles (BC-NPs) are demonstrated to improve the intestinal permeability of BBR via transiently and reversibly modulating the intercellular TJs (paracellular pathway) and Pgp-mediated drug efflux (transcellular pathway). As compared to free BBR and chitosan nanoparticles, the BC-NPs enhanced the relative oral bioavailability of BBR in rats (4.4- and 2.7-fold, respectively), and the therapeutic potency of BBR in renal function and histopathology. In summary, such strategy may provide an effective nanocarrier system for oral delivery of BBR and PSLDs.

Antibacterial chitosan composite films with food-inspired carbon spheres immobilized AgNPs

The cumulative toxicity of AgNPs has limited their application in food packaging. As such, the quest for AgNPs should focus on controlling their release to reduce the cumulative toxicity. Here, two kinds of green hydrothermal carbonized methods were used to treat sulfhydryl-modified chitosan to obtain two kinds of carbon spheres/AgNPs (Glutinous rice sesameballs-like AgNPs-SMCS and dragon fruit-like SMCS-Ag), which exhibited good stability and high immobilization efficiency for AgNPs, and the release of total Ag from AgNPs-SMCS and SMCS-Ag were only about 5.63% and 3.59% after 14 days, respectively. Subsequently, they were added into chitosan separately to prepare chitosan-based films. Two carbon spheres/AgNPs regulated the microstructure of chitosan-based films because of the electrostatic interaction and the micro-nanometer filling behavior, thus further immobilized the AgNPs. Importantly, the films presented good antibacterial activity and excellent safety. These results will provide a theoretical basis for the green and safe design of AgNPs antibacterial agent.

The impact of chitooligosaccharides and their derivatives on the in vitro and in vivo antitumor activity: A comprehensive review

Chitooligosaccharides (COS) are the degraded products of chitin or chitosan. COS is water-soluble, non-cytotoxic to organisms, readily absorbed through the intestine, and eliminated primarily through the kidneys. COS possess a wide range of biological activities, including immunomodulation, cholesterol-lowering, and antitumor activity. Although work on COS goes back at least forty years, several aspects remain unclear. This review narrates the recent developments in COS antitumor activities, while paying considerable attention to the impacts of physicochemical properties (such as molecular weight and degrees of deacetylation) and chemical modifications both in vitro and in vivo. COS derivatives not only improve some physicochemical properties, but also expand the range of applications in drug and gene delivery. COS (itself or as a drug carrier) can inhibit tumor cell proliferation and metastasis, which might be attributed to its ability to stimulate the immune response along with its anti-angiogenic activity. Further, an attempt has been made to report limitations and future research. The potential health benefits of COS and its derivatives against cancer may offer a new insight on their applications in food and medical fields.

Compare the Effects of Magnolol on Gastric Cancer Cells Through c-Jun N-Terminal Kinase Signaling Pathway and Gold Magnetic

This article explores the effects and mechanisms of magnolol on the proliferation of gastric cancer cells as well as the apoptosis. First, 0 (control group), 20, 40, and 80 /x mol/L magnolol were observed on SGC-7901 cells for 24, 48, and 72 h. We use MTT method to measure the cell viability, and apoptosis and cells were detected by flow cytometry. Cell proliferation inhibition rate, apoptosis and cell cycle experiments showed that P-value < 0.05 means the difference is statistically significant. And the results which compare the control group, the 20, 40, and 80 /x mol/L show that honokiol had lower cell viability (P < 0.01), increased apoptotic rate (P < 0.01), and cell cycle stay in the G1 phase (P < 0.01), so we found that honokiol may suppress the proliferation of SGC-7901 cells and stimulate apoptosis by regulating cyclin and apoptosis-related proteins. With the development of nanomaterials synthesis technology and application in biomedicine, gold magnetic composite nanomaterials have unique properties, so they have been widely concerned in many applications. We combine gold and magnetic nanomaterials through other nanostructures to achieve the integration of diagnosis and treatment of tumors. We have synthesized two kinds of gold magnetic nanocomposites, GNR-PPy-FA nanocomposites. With the role of chemotherapy and heat and light therapy, GNR-PPy-FA nanocomposites have high light-to-heat conversion efficiency. Cell experiments verify the effect of chemotherapy and photothermal treatment of composite nanomaterials. After incubation with gold magnetic composite nanomaterials, the cell survival rate of tumor cells decreased to about 15%. In addition, both types of gold magnetic nanocomposites have the ability to dually target cancer cells, and the modification of folic acid and cancer cell membranes makes the material more biocompatible.

Natural Hydrogels Applied in Photodynamic Therapy

Natural hydrogels are three-dimensional (3D) water-retaining materials with a skeleton consisting of natural polymers, their derivatives or mixtures. Natural hydrogels can provide sustained or controlled drug release and possess some unique properties of natural polymers, such as biodegradability, biocompatibility and some additional functions, such as CD44 targeting of hyaluronic acid. Natural hydrogels can be used with photosensitizers (PSs) in photodynamic therapy (PDT) to increase the range of applications. In the current review, the pertinent design variables are discussed along with a description of the categories of natural hydrogels available for PDT.

How Do Amphiphilic Biopolymers Gel Blood? An Investigation Using Optical Microscopy

Amphiphilic biopolymers such as hydrophobically modified chitosan (hmC) have been shown to convert liquid blood into elastic gels. This interesting property could make hmC useful as a hemostatic agent in treating severe bleeding. The mechanism for blood gelling by hmC is believed to involve polymer-cell self-assembly, i.e., insertion of hydrophobic side chains from the polymer into the lipid bilayers of blood cells, thereby creating a network of cells bridged by hmC. Here, we probe the above mechanism by studying dilute mixtures of blood cells and hmC in situ using optical microscopy. Our results show that the presence of hydrophobic side chains on hmC induces significant clustering of blood cells. The extent of clustering is quantified from the images in terms of the area occupied by the 10 largest clusters. Clustering increases as the fraction of hydrophobic side chains increases; conversely, clustering is negligible in the case of the parent chitosan that lacks hydrophobes. Moreover, the longer the hydrophobic side chains, the greater the clustering (i.e., C₁₂ > C₁₀ > C₈ > C₆). Clustering is negligible at low hmC concentrations but becomes substantial above a certain threshold. Finally, clustering due to hmC can be reversed by adding the supramolecule α-cyclodextrin, which is known to capture hydrophobes in its binding pocket. Overall, the results from this work are broadly consistent with the earlier mechanism, albeit with a few modifications.

Controlled Release of 5-FU from Chi-DHA Nanoparticles Synthetized with Ionic Gelation Technique: Evaluation of Release Profile Kinetics and Cytotoxicity Effect

The ionic gelation technique allows us to obtain nanoparticles able to function as carriers for hydrophobic anticancer drugs, such as 5-fluoruracil (5-FU). In this study, reticulated chitosan– docosahexaenoic acid (Chi–DHAr) nanoparticles were synthesized by using a chemical reaction between amine groups of chitosan (Chi) and carboxylic acids of docosahexaenoic acid (DHA) and the presence of a link between Chi and DHA was confirmed by FT-IR, while the size and morphology of the obtained Chi-DHAr nanoparticles was evaluated with dynamic light scattering (DLS) and scanning electron microscopy (SEM), respectively. Drug-loading content (DLC) and drug-loading efficiency (DLE) of 5-FU in Chi-DHAr nanoparticles were 33.74 ± 0.19% and 7.9 ± 0.26%, respectively, while in the non-functionalized nanoparticles (Chir + 5FU), DLC, and DLE were in the ranges of 23.73 ± 0.14%, 5.62%, and 0.23%, respectively. The in vitro release profile, performed in phosphate buffer saline (PBS, pH 7.4) at 37 °C, indicated that the synthetized Chi–DHAr nanoparticles provided a sustained release of 5-FU. Based on the obtained regression coefficient value (R²), the first order kinetic model provided the best fit for both Chir and Chi-DHAr nanoparticles. Finally, cytotoxicity studies of chitosan, 5-FU, Chir, Chir + 5-FU, Chi-DHAr, and Chi-DHAr + 5-FU nanoparticles were conducted. Overall, Chi-DHAr nanoparticles proved to be much more biocompatible than Chir nanoparticles while retaining the ability to release the drug with high efficiency, especially towards specific types of cancerous cells.

Nanodrug Delivery Systems for the Treatment of Ovarian Cancer

Despite advances achieved in medicine, chemotherapeutics still has detrimental side effects with ovarian cancer (OC), accounting for numerous deaths among females. The provision of safe, early detection and active treatment of OC remains a challenge, in spite of improvements in new antineoplastic discovery. Nanosystems have shown remarkable progress with impact in diagnosis and chemotherapy of various cancers, due to their ideal size; improved drug encapsulation within its interior core; potential to minimize drug degradation; improve in vivo drug release kinetics; and prolong blood circulation times. However, nanodrug delivery systems have few limitations regarding its accuracy of tumour targeting and the ability to provide sustained drug release. Hence, a cogent and strategic approach has focused on nanosystem functionalization with antibody-based ligands to selectively enhance cellular uptake of antineoplastics. Antibody functionalized nanosystems are (advanced) synthetic candidates, with a broad range of efficiency in specific tumour targeting, whilst leaving normal cells unaffected. This article comprehensively reviews the present status of nanosystems, with particular emphasis on nanomicelles for molecular diagnosis and treatment of OC. In addition, biomarkers of nanosystems provide important prospects as chemotherapeutic strategies to upsurge the survival rate of patients with OC.

Multifunctional Mineral Hydrogels: Potential in Artificially Intelligent Skins and Drug Delivery

Hydrogels have received considerable attention due to their potential applications in the fields of drug delivery, tissue engineering, and stimuli-responsive devices. Nonetheless, it is still a great difficulty in designing hydrogels with multifunctional characteristics including excellent antibacterial activity and appropriate mechanical and remarkable sensing properties. In the present study, a novel type of organic-inorganic adhesive is demonstrated, which comprises inorganic matter of amorphous calcium phosphate particles and organic substances of poly(acrylic acid) and chitosan. The hydrogel possesses excellent biocompatible and antibacterial activity, unique viscoelastic properties, high quantity of drug load, and remarkably sensitive pressure sensing, which have potential use as antibacterial biomaterials, artificially intelligent skins, and drug delivery carriers.

Self-assembled amphiphilic chitosan: A time-dependent nanostructural evolution and associated drug encapsulation/elution mechanism

This investigation reports the nanostructural evolution and associated encapsulation and elution of a hydrophobic drug, demethoxycurcumin (DMC), as a molecular probe, with the carboxymethyl-hexanoyl chitosan (CHC), which has been a technically interesting amphiphilic chitosan-based polymer successfully developed in this lab for years. The self-assembly nature of the CHC in neutral aqueous solutions allowed efficient encapsulation of various drugs without deteriorating or changing drugs' activity. However, its self-assembly behavior associated with nanostructural stability or variation, in terms of residence time in aqueous solution has not been well characterized and how the CHC nanostructure may be altered upon entrapping a drug, followed releasing out of the nanostructure. In this study, the CHC/DMC assembled model was used to evaluate entrapping efficiency, CHC-DMC interaction, and nanostructural variation while the drug being encapsulated and released from the CHC nanoparticles. Experimental outcomes showed a fractal transition between nanoparticulate and short fiber-like network evolution of the CHC as time elapsed, with the presence or absence of the DMC probe. This entrapment of DMC is relatively efficient upon CHC assembly and the associated DMC arrangement inside the helical CHC macromolecule gave largely increasing space over the resulting CHC/DMC assembly. Its excellent colloidal and nanostructural stability over a reasonably long period of time in testing environment suggests that this CHC/DMC assembly not only provides a crucial advantage for drug delivery application but also considers as a nanostructural model for better understanding of the mechanism upon drug encapsulation and elution which may be applicable to alternative amphiphilic polysaccharide-based macromolecules.

Robust oil-core nanocapsules with hyaluronate-based shells as promising nanovehicles for lipophilic compounds

The design of nanodelivery systems has been recently considered as a solution to the major challenge in pharmaceutical research - poor bioavailability of lipophilic drugs. Nanocapsules with liquid oil cores and shells based on amphiphilic polysaccharides were developed here as robust carriers of hydrophobic active compounds. A series of modified charged hyaluronates were synthesized and used as stabilizing shells ensuring also the biocompatibility of the nanocapsules that is crucial for applications related to the delivery of lipophilic drugs in vivo. Importantly, the oil nanodroplets were found to be stably suspended in water for at least 15 months without addition of low molar mass surfactants. Moreover, their size and stability may be tuned by varying the relative content of hydrophobic and hydrophilic groups in the hyaluronate derivatives as was confirmed by dynamic light scattering and nanoparticle tracking analysis as well as electron microscopy. In vivo studies demonstrated that hyaluronate-based nanocapsules accumulated preferentially in the liver as well as in the lungs. Moreover, their accumulation was dramatically potentiated in endotoxemic mice. In vitro studies showed that the nanocapsules were taken up by liver sinusoidal endothelial cells and by mouse lung vascular endothelial cells. Importantly, the capsules were found to be nontoxic in an acute oral toxicity experiment even at a dose of 2000 mg per kg b.w. Biocompatible hyaluronate-based nanocapsules with liquid cores described herein represent a promising and tunable nanodelivery system for lipophilic active compounds via both oral and intravenous administration.

pH Sensitive Hydrogels in Drug Delivery: Brief History, Properties, Swelling, and Release Mechanism, Material Selection and Applications

Improving the safety efficacy ratio of existing drugs is a current challenge to be addressed rather than the development of novel drugs which involve much expense and time. The efficacy of drugs is affected by a number of factors such as their low aqueous solubility, unequal absorption along the gastrointestinal (GI) tract, risk of degradation in the acidic milieu of the stomach, low permeation of the drugs in the upper GI tract, systematic side effects, etc. This review aims to enlighten readers on the role of pH sensitive hydrogels in drug delivery, their mechanism of action, swelling, and drug release as a function of pH change along the GI tract. The basis for the selection of materials, their structural features, physical and chemical properties, the presence of ionic pendant groups, and the influence of their pKa and pKb values on the ionization, consequent swelling, and targeted drug release are also highlighted.

Structural dependence on the property of chiral stationary phases derived from chitosan bis(arylcarbamate)-(amide)s

The goal of present study was to investigate the structural dependence of chitosan derivatives on enantioseparation and mobile phase tolerance of the corresponding chiral packing materials for liquid chromatography. Hence, a series of chitosan bis(arylcarbamate)-(n-pentyl amide)s and the related chiral stationary phases (CSPs) were prepared from chitosans with different molecular weights. Because of the H-bond formed via CH₃-π interaction, the CSP bearing methyl substituent exhibited high tolerance than the ones bearing dichloro substituents. The CSP derived from the chitosan bis(3,5-dichlorophenylcarbamate)-(n-pentyl amide) with a higher molecular weight possessed high tolerance to mobile phases, whereas the enantioseparation capability of this CSP was not as good as that of the one prepared from the chitosan derivative with a lower molecular weight. Therefore, enantioseparation capability and mobile phase tolerance have to be counterbalanced in designing chiral selectors for the CSPs derived from chitosan bis(arylcarbamate)-(amide)s.

Local co-administration of gene-silencing RNA and drugs in cancer therapy: State-of-the art and therapeutic potential

Gene-silencing miRNA and siRNA are emerging as attractive therapeutics with potential to suppress any genes, which could be especially useful in combination cancer therapy to overcome multidrug resistant (MDR) cancer. Nanomedicine aims to advance cancer treatment through functional nanocarriers that delivers one or more therapeutics to cancer tissue and cells with minimal off-target effects and suitable release kinetics and dosages. Although much effort has gone into developing circulating nanocarriers with targeting functionality for systemic administration, another alternative and straightforward approach is to utilize formulations to be administered directly to the site of action, such as pulmonary and intratumoral delivery. The combination of gene-silencing RNA with drugs in nanocarriers for localized delivery is emerging with promising results. In this review, the current progress and strategies for local co-administration of RNA and drug for synergistic effects and future potential in cancer treatment are presented and discussed. Key advances in RNA-drug anticancer synergy and localized delivery systems were combined with a review of the available literature on local co-administration of RNA and drug for cancer treatment. It is concluded that advanced delivery systems for local administration of gene-silencing RNA and drug hold potential in treatment of cancer, depending on indication. In particular, there are promising developments using pulmonary delivery and intratumoral delivery in murine models, but further research should be conducted on other local administration strategies, designs that achieve effective intracellular delivery and maximize synergy and feasibility for clinical use.

Advances in the Fabrication of Antimicrobial Hydrogels for Biomedical Applications

This review describes, in an organized manner, the recent developments in the elaboration of hydrogels that possess antimicrobial activity. The fabrication of antibacterial hydrogels for biomedical applications that permits cell adhesion and proliferation still remains as an interesting challenge, in particular for tissue engineering applications. In this context, a large number of studies has been carried out in the design of hydrogels that serve as support for antimicrobial agents (nanoparticles, antibiotics, etc.). Another interesting approach is to use polymers with inherent antimicrobial activity provided by functional groups contained in their structures, such as quaternary ammonium salt or hydrogels fabricated from antimicrobial peptides (AMPs) or natural polymers, such as chitosan. A summary of the different alternatives employed for this purpose is described in this review, considering their advantages and disadvantages. Finally, more recent methodologies that lead to more sophisticated hydrogels that are able to react to external stimuli are equally depicted in this review.

Regioselective chitosan end-group activation: the triskelion approach

Non-reactive chitosan extremities are regioselectively activated with a trivalent linker, called triskelion, allowing subsequent end-group functionalization with any thiol-reactive species.

Dual drug-loaded biofunctionalized amphiphilic chitosan nanoparticles: Enhanced synergy between cisplatin and demethoxycurcumin against multidrug-resistant stem-like lung cancer cells

Lung cancer kills more humans than any other cancer and multidrug resistance (MDR) in cancer stem-like cells (CSC) is emerging as a reason for failed treatments. One concept that addresses this root cause of treatment failure is the utilization of nanoparticles to simultaneously deliver dual drugs to cancer cells with synergistic performance, easy to envision - hard to achieve. (1) It is challenging to simultaneously load drugs of highly different physicochemical properties into one nanoparticle, (2) release kinetics may differ between drugs and (3) general requirements for biomedical nanoparticles apply. Here self-assembled nanoparticles of amphiphilic carboxymethyl-hexanoyl chitosan (CHC) were shown to present nano-microenvironments enabling simultaneous loading of hydrophilic and hydrophobic drugs. This was expanded into a dual-drug nano-delivery system to treat lung CSC. CHC nanoparticles were loaded/chemically modified with the anticancer drug cisplatin and the MDR-suppressing Chinese herbal extract demethoxycurcumin, followed by biofunctionalization with CD133 antibody for enhanced uptake by lung CSC, all in a feasible one-pot preparation. The nanoparticles were characterized with regard to chemistry, size, zeta potential and drug loading/release. Biofunctionalized and non-functionalized nanoparticles were investigated for uptake by lung CSC. Subsequently the cytotoxicity of single and dual drugs, free in solution or in nanoparticles, was evaluated against lung CSC at different doses. From the dose response at different concentrations the degree of synergy was determined through Chou-Talalay's Plot. The biofunctionalized nanoparticles promoted synergistic effects between the drugs and were highly effective against MDR lung CSC. The efficacy and feasible one-pot preparation suggests preclinical studies using relevant disease models to be justified.