Molecular simulations of confined crystallization in the microdomains of diblock copolymers

Dynamic Monte Carlo simulations of strain-induced crystallization in multiblock copolymers: effects of dilution

Multiblock copolymers containing alternating semicrystalline and molten blocks are good thermoplastic elastomers. Their crystallization in the stretching process is however complicated by the dilution effects, prior microphase separation and contrast chain rigidity of the molten blocks. We designed our systematic investigation with three integrated steps, and herein, as the first step, we considered only the dilution effects without prior microphase separation and contrast chain rigidity. We compared two extreme situations of local dilution separately corresponding to parallel-posited and antiparallel-posited block copolymers upon strain-induced crystallization. Our dynamic Monte Carlo simulations of diblock and tetrablock copolymers demonstrated that the stretching introduces a constraint on the diffusion of locally posited crystallizable blocks along the stretching direction for crystallization and thus enhances the dilution effects to result in a higher diversity in crystal stabilities. We observed that the strain-induced crystallization of parallel-posited copolymers behaved like the melt crystallization of homopolymers; in contrast, the strain-induced crystallization of antiparallel-posited copolymers yielded crystallites near the block junction, which are relatively small and less stable due to their local dilution suppressing their melting points. Similar to the case of spider dragline silks, two contrasting stabilities of crystallites in semicrystalline multiblock copolymers explain their good toughness. Our modeling approach paves the way toward a better understanding of the structure-property relationship in the semicrystalline thermoplastic elastomers.

Controllable formation of unusual homocrystals in poly(L-lactic acid)/poly(D-lactic acid) asymmetric blends induced by the constraining effects of pre-existing stereocomplexes

Crystallization in confined environments usually induces polymers showing complicated crystallization kinetics and unusual crystalline structure. Beyond the typical confined polymer systems, pre-existing crystals can also exert confinement effects on the subsequent crystallization of polymorphic or multi-component polymers; this, however, is not well understood at present. Herein, poly(L-lactic acid)/poly(D-lactic acid) (PLLA/PDLA, abbreviated as L/D) asymmetric blends with various PDLA fractions (f D = 0.02–0.5) are chosen as a model system and the effects of pre-existing stereocomplexes (SCs) on the crystallization kinetics and polymorphic structure are investigated. It is found that unusual β-form homocrystals (HCs) of poly(lactic acid) can be formed in an asymmetric L/D blend, which are strongly influenced by the molecular weights (MWs) of the used polymers, L/D mixing ratio, thermal treatment temperature (T max) and crystallization temperature (T c). The formation of β-HCs is preferred in asymmetric L/D blends with low and medium MWs, medium f D (0.1–0.2), medium T max (170–200°C), and low T c (70–110°C). The metastable β-HCs reorganize into the more stable α-HCs via melt recrystallization in the heating process. It is proposed that the β-HC formation stems from the constraining effects of pre-existing SCs; this constraining effect is governed by the content of pre-existing unmelted SCs in the thermally treated samples.

Competition between Structural Relaxation and Crystallization in the Glass Transition Range of Random Copolymers

Structural relaxation in polymers occurs at temperatures in the glass transition range and below. At these temperatures, crystallization is controlled by diffusion and nucleation. A sequential occurrence of structural relaxation, nucleation, and crystallization was observed for several homopolymers during annealing in the range of the glass transition. It is known from the literature that all of these processes are strongly influenced by geometrical confinements. The focus of our work is copolymers, in which the confinements are caused by the random sequence of monomer units in the polymer chain. We characterize the influence of these confinements on structure formation and relaxation in the vicinity of the glass transition. The measurements were performed with a hydrogenated nitrile-butadiene copolymer (HNBR). The kinetics of the structural relaxation and the crystallization was measured using fast differential scanning calorimetry (FDSC). This technique was selected because of the high sensitivity, the fast cooling rates, and the high time resolution. Crystallization in HNBR causes a segregation of non-crystallizable segments in the macromolecule. This yields a reduction in mobility in the vicinity of the formed crystals and as a consequence an increased amount of so-called "rigid amorphous fraction" (RAF). The RAF can be interpreted as self-assembled confinements, which limit and control the crystallization. An analysis of the crystallization and the relaxation shows that the kinetic of both is identical. This means that the Kohlrausch exponent of relaxation and the Avrami exponent of crystallization are identical. Therefore, the crystallization is not controlled by nucleation but by diffusion and is terminated by the formation of RAF.

Anomalous Ostwald Ripening Enables 2D Polymer Crystals via Fast Evaporation

We demonstrate by molecular simulations that the Ostwald ripening of crystalline polymer nuclei within the fast-evaporation-induced 2D skin layer is retarded at suitable temperatures and evaporation rates. Such an anomalous ripening can be attributed to the interplay between the thermodynamically driven diffusion of noncrystalline fragments toward the growing nuclei and the diffusive current away from the free surface caused by the densification in the nonequilibrium skin layer. The growth orientation of the nuclei inside the skin plane can be adjusted during this anomalous ripening process, which is beneficial for fabricating 2D polymer crystals.

Study on the Thermodynamics of Polymer Crystallization Based on Twin-Lattice Model

Polymer crystallization is the most important part in determining the performance of polymeric materials. The twin-lattice model originally provided by Lennard-Jones and Devonshire, developed by Pople and Karasz and other researchers, is extended for describing the thermodynamics of polymer crystallization. The positional order of segments and the orientational order of bonds are considered in this model. The free energy of polymers is obtained by further introducing the conformational energy and entropy, and thus a new parameter is defined, which is the ratio of conformational energy and positional diffusion energy. We studied two kinds of processes in polymer crystallization, including the process with plastic crystal phase and without any mesophases. The choice of crystallizing process is determined by the magnitude of lattice energy and conformational energy. The solid-solid transition from crystal to plastic crystal shows a significant dependence on the conformational energy. Considering data reliability, n-paraffins are chosen as the representation of polymers to compare the predictions of the model with experimental observations. We predict the number of carbons beyond which the rotator phase disappears, which is quite in agreement with the experiments. These calculations and results show this model can provide a new understanding to the crystallization of polymers.

Block copolymer crystalsomes with an ultrathin shell to extend blood circulation time

In water, amphiphilic block copolymers (BCPs) can self-assemble into various micelle structures depicting curved liquid/liquid interface. Crystallization, which is incommensurate with this curved space, often leads to defect accumulation and renders the structures leaky, undermining their potential biomedical applications. Herein we report using an emulsion-solution crystallization method to control the crystallization of an amphiphilic BCP, poly (l-lactide acid)-b-poly (ethylene glycol) (PLLA-b-PEG), at curved liquid/liquid interface. The resultant BCP crystalsomes (BCCs) structurally mimic the classical polymersomes and liposomes yet mechanically are more robust thanks to the single crystal-like crystalline PLLA shell. In blood circulation and biodistribution experiments, fluorophore-loaded BCCs show a 24 h circulation half-life and a 8% particle retention in the blood even at 96 h post injection. We further demonstrate that this good performance can be attributed to controlled polymer crystallization and the unique BCC nanostructure.

In block copolymer vesicles, crystallization often leads to defects and renders the structures leaky that undermines their potential biomedical application. Here the authors use an emulsion solution method to control the crystallization of an amphiphilic block copolymer at the curved liquid/liquid interface to improve the blood circulation time.

Crystallization of silica promoted by residual hydrogen bonding interactions at high temperature

A novel approach to prepare crystalline silica through calcination of the composite of silica and highly fluorinated graphene at a relatively low temperature is demonstrated. Silica and its composites with graphene and its derivatives (graphene, graphene oxide and graphene with various degrees of fluorination) were synthesized and then calcined at 900 °C in an air atmosphere. The results of X-ray-diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy reveal that cristobalite was produced through calcining composites of silica and highly fluorinated graphene under ambient air at a relatively low temperature (900 °C), while for the composites of silica and graphene and its derivatives, the calcined products are all amorphous. Thermal gravimetric analysis results indicate that the maximum decomposition temperature of functional groups in highly fluorinated graphene at air temperature is 457 °C, which is higher than that in medium fluorinated graphene, lower fluorinated graphene and graphene oxide (411.3 °C, 313.4 °C and 238.9 °C). A high degradation temperature of highly fluorinated graphene contributes to strong residual hydrogen bonding interactions at high temperature. FTIR results further illustrate that many residual hydrogen bonding interactions in composites of silica and highly fluorinated graphene at higher temperature result in enough linear structures. As a consequence, stronger residual hydrogen bonding interactions at high temperature in composites of silica and highly fluorinated graphene restrain the self-condensation of Si-OH groups and promote the formation of crystalline structures.

Crystalline and Spherulitic Morphology of Polymers Crystallized in Confined Systems

Due to the effects of microphase separation and physical dimensions, confinement widely exists in the multi-component polymer systems (e.g., polymer blends, copolymers) and the polymers having nanoscale dimensions, such as thin films and nanofibers. Semicrystalline polymers usually show different crystallization kinetics, crystalline structure and morphology from the bulk when they are confined in the nanoscale environments; this may dramatically influence the physical performances of the resulting materials. Therefore, investigations on the crystalline and spherulitic morphology of semicrystalline polymers in confined systems are essential from both scientific and technological viewpoints; significant progresses have been achieved in this field in recent years. In this article, we will review the recent research progresses on the crystalline and spherulitic morphology of polymers crystallized in the nanoscale confined environments. According to the types of confined systems, crystalline, spherulitic morphology and morphological evolution of semicrystalline polymers in the ultrathin films, miscible polymer blends and block copolymers will be summarized and reviewed.