In vivo study of the effectiveness of quantitative percussion diagnostics as an indicator of the level of the structural pathology of teeth

An evaluation of quantitative percussion diagnostics for determining the probability of a microgap defect in restored and unrestored teeth: A prospective clinical study

STATEMENT OF PROBLEM

Current dental diagnostics are image based and cannot detect a structural microgap defect such as a crack in a tooth. Whether percussion diagnostics can effectively diagnose a microgap defect is unclear.

PURPOSE

The purpose of the present study was to determine from a large multicenter prospective clinical study whether quantitative percussion diagnostics (QPD) could detect structural damage in teeth and whether a probability of its presence could be provided.

MATERIAL AND METHODS

A nonrandomized prospective and multicenter clinical validation study with 224 participants was performed in 5 centers with 6 independent investigators. The study used QPD and the normal fit error to determine whether a microgap defect was present in a natural tooth. Teams 1 and 2 were blinded. Team 1 tested teeth scheduled for restoration with QPD, and Team 2 disassembled the teeth aided by a clinical microscope, transillumination, and a penetrant dye. Microgap defects were documented in written and video formats. Controls were participants without damaged teeth. The percussion response from each tooth was stored on a computer and analyzed. A total of 243 teeth were tested to provide approximately 95% power to test the performance goal of 70%, based on an assumed population overall agreement of 80%.

RESULTS

Regardless of the collection method, tooth geometry, restoration material used, or restoration type, the data on detecting a microgap defect in a tooth were accurate. The data also reflected good sensitivity and specificity consistent with previously published clinical studies. The combined study data showed an overall agreement of 87.5% with a 95% confidence interval (84.2 to 90.3), beyond the 70% predetermined performance goal. The combined study data determined whether it was possible to predict the probability of a microgap defect.

CONCLUSIONS

The results showed that the data on detecting microgap defects in a tooth site were consistently accurate and confirmed that QPD provided information to aid the clinician in treatment planning and early preventative treatment. QPD can also alert the clinician of probable diagnosed and undiagnosed structural problems via the use of a probability curve.

Lessons learned from the Cracked Tooth Registry: A 3-year clinical study in the Nation's Network

BACKGROUND

This article reviews the most salient lessons learned from a large, multisite, 3-year observational study of posterior teeth with cracks conducted by The National Dental Practice-Based Research Network.

TYPES OF STUDIES REVIEWED

Eight articles published over a 6-year period (2017-2022) describing clinical characteristics of posterior teeth with cracks and their treatment and outcomes are reviewed and discussed to answer 3 common questions faced by oral health care clinicians: Which cracked teeth will get worse? When should practitioners intervene? What is the best treatment?

RESULTS

Although cracks in teeth are prevalent, few will fracture (3%) or show crack progression in 3 years (12%). Characteristics that guide the clinician to treatment include active caries, biting pain, and to a lesser degree, having a crack detectable with an explorer, connecting with a restoration, or blocking transilluminated light; the main treatment chosen is a complete crown. Of those teeth treated (36%), few (14%) will need retreatment but will still survive, despite having an internal crack as well.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

Although cracked teeth often pose a dilemma to clinicians, clincians are generally good at deciding which teeth to treat and when and which to monitor.

Finite Element Study of Periodontal Ligament Properties for a Maxillary Central Incisor and a Mandibular Second Molar Under Percussion Conditions

Purpose

The quantitative percussion diagnostics (QPD) response of a mandibular second molar and a maxillary central incisor including their supporting ligament/bone structure was simulated using dynamic 3D finite element analysis (FEA). The focus of the work was on the role of the periodontal ligament (PDL) which acts as a damper in the dental structure and dissipates occlusal forces transmitted from the tooth surface to the surrounding bone.

Methods

Several FEA models were developed to examine the effects of mechanical characteristics that have been reported for the PDL. Specifically, the effects of changing the PDL’s quasi-static elastic modulus and Rayleigh damping properties were predicted.

Results

The present FEA simulations indicate that the PDL can significantly reduce forces for both the incisor and the molar compared to when there is no PDL (i.e. ankylosed tooth) as long as the quasi-static elastic modulus of the PDL is among the lowest reported (~ 0.1 MPa). In addition, the FEA simulations for both the incisor and molar with this lower value of the PDL quasi-static elastic modulus are also in reasonably good agreement with experimental percussion data. A simple approximation for partitioning Rayleigh damping properties between the hard and soft tissues was also found to provide reasonable values of overall damping that are consistent with experimental data.

Conclusion

The overall findings indicate that using a quasi-static elastic modulus of approximately 0.1 MPa for the PDL in combination with Rayleigh damping gives realistic predictions of the mechanical response of a tooth under QPD loading conditions.

New technique for detecting cracked teeth and evaluating the crack depth by contrast-enhanced cone beam computed tomography: an in vitro study

Background

Cracked teeth may cause various clinical symptoms depending on the extension depth of the crack and the subsequent bacterial infections. However, techniques to reliably determine the extension depths of cracks in teeth before treatment are lacking. The aim of this study was to develop a new technique based on contrast-enhanced cone beam computed tomography (CBCT) to improve the accuracy of crack depth evaluation in vitro.

Methods

We developed an in vitro artificial simulation model of cracked teeth. Pre-experimental CBCT (pre-CBCT), and micro-computed tomography (micro-CT) were first performed for all cracked teeth (n = 31). Contrast-enhanced CBCT was then performed by infiltrating the crack with ioversol under vacuum conditions. The sensitivities of pre-CBCT and contrast-enhanced CBCT for the diagnosis of cracked teeth were calculated. According to the K-means clusters, crack depths measured by micro-CT were changed into categorical variables. Bland–Altman plot and the intraclass correlation coefficient (ICC) were used to analyze the consistency of the crack depths between the pre-CBCT and contrast-enhanced CBCT, as well as the ICC between the contrast-enhanced CBCT and micro-CT. Receiver operating characteristic (ROC) curves were generated to assess the ability for predicting crack depth in the differential diagnosis using pre-CBCT and contrast-enhanced CBCT. Restricted cubic splines were also used to model the non-linear relationship between the crack depths of contrast-enhanced CBCT and micro-CT.

Results

The sensitivities of pre-CBCT and contrast-enhanced CBCT were 48.4%, and 67.7%, respectively. The ICC value of crack depth as measured by pre-CBCT and contrast-enhanced CBCT was 0.847 (95% confidence interval [CI] 0.380–0.960; P < 0.001). The areas under ROC curves (AUC) of pre-CBCT and contrast-enhanced CBCT were different: the AUC of pre-CBCT was 0.958 (P = 0.000, 95% CI 0.843–1.074), and the AUC of contrast-enhanced CBCT was 0.979 (P = 0.000, 95% CI 0.921–1.037), and the difference was not statistically significant (Z = − 0.707, P = 0.480). The ICC value of crack depth as measured by contrast-enhanced CBCT and micro-CT was 0.753 (95% CI 0.248–0.911; P < 0.001).

Conclusion

Contrast-enhanced CBCT under vacuum conditions with a contrast medium can significantly improve the crack detection rate of cracked teeth; however, it cannot measure the crack depths accurately.

Baseline characteristics as 3-year predictors of tooth fracture and crack progression: Findings from The National Dental Practice-Based Research Network

BACKGROUND

The authors of this practice-based study estimated the risk of experiencing tooth fractures and crack progression over 3 years and correlated baseline patient-, tooth-, and crack-level characteristics with these outcomes.

METHODS

Two-hundred-and-nine National Dental Practice-Based Research Network dentists enrolled a convenience sample of 2,601 participants with a cracked vital posterior tooth that had been examined for at least 1 recall visit over 3 years. Data were collected at the patient, tooth, and crack levels at baseline, annual follow-up visits, and any interim visits. Associations between these characteristics and the subsequent same-tooth fractures and crack progression were quantified.

RESULTS

Of the 2,601 teeth with a crack or cracks at baseline, 78 (3.0%; 95% confidence interval, 2.4% to 3.7%) subsequently developed a fracture. Of the 1,889 patients untreated before year 1, 232 (12.3%; 95% confidence interval, 10.9% to 13.8%) had some type of crack progression. Baseline tooth-level characteristics associated with tooth fracture were the tooth was maxillary and had a wear facet through enamel and a crack was detectable with an explorer, on the facial surface, and in a horizontal direction. Crack progression was associated with males and teeth with multiple cracks at baseline; teeth with a baseline facial crack were less likely to show crack progression. There was no commonality between characteristics associated with tooth fracture and those associated with crack progression.

CONCLUSIONS

Development of tooth fractures and crack progression over 3 years were rare occurrences. Specific characteristics were associated with the development of tooth fracture and crack progression, although none were common to both.

PRACTICAL IMPLICATIONS

This information can aid dentists in assessing factors that place posterior cracked teeth at risk of experiencing adverse outcomes.

Symptom changes and crack progression in untreated cracked teeth: One-year findings from the National Dental Practice-Based Research Network

OBJECTIVES

The study objective was to: (1) quantify symptom (pain) and crack changes during one year of follow-up, among teeth that had at least one visible crack at baseline but which did not receive treatment for those cracks; (2) identify any patient traits/behaviors and external tooth/crack characteristics correlated with these changes.

METHODS

In this observational study, 209 National Dental Practice-Based Research Network dentists enrolled a convenience sample of 2858 subjects, each with a single, vital posterior tooth with at least one observed external crack; 1850 teeth remained untreated after one year of follow-up and were the cohort for analyses. Data were collected at the patient-, tooth-, and crack-level at baseline, one-year follow up (Y1), and interim visits. Associations between changes in symptoms and cracks were identified, as were changes in symptoms associated with baseline treatment recommendations.

RESULTS

Changes in pain symptoms were observed in 32% of patients; decreases were twice as common as increases (23% vs. 10%). More changes were observed in cold pain than in biting pain and spontaneous pain combined; 2% had increases in biting pain and 2% in spontaneous pain. Only 6% had an increase in the number of cracks. Changes in pain symptoms were not associated with an increase in the number of cracks, but were associated with baseline treatment recommendations. Specifically, pain symptom changes (especially decreases) were more common when the tooth was recommended for treatment at baseline.

CONCLUSIONS

Cracked teeth that have not received treatment one year after baseline do not show meaningful progression as measured by increased symptoms or number of cracks during follow-up.

CLINICAL SIGNIFICANCE

Untreated cracked teeth, most of which were recommended for monitoring at baseline and some of which were recommended for treatment but did not receive treatment, remained relatively stable for one year with little progression of cracks or symptoms.

Ten-year retrospective study of the effectiveness of quantitative percussion diagnostics as an indicator of the level of structural pathology in teeth

STATEMENT OF PROBLEM

Conventional dental diagnostic aids are only partially effective in diagnosing structural defects such as cracks in teeth. A more predictable diagnostic for structural instability in the mouth is needed.

PURPOSE

The purpose of this clinical study with an increased population size was to evaluate the effectiveness of diagnosing structural instability by using the quantitative percussion diagnostics (QPD) system and to evaluate the influence of independent variables on the relationship between normal fit error (NFE) and observed structural instability found during the clinical disassembly of teeth.

MATERIAL AND METHODS

Twenty-two participants with 264 sites needing restoration were enrolled in an institutional review board-approved 10-year retrospective clinical study. Each site had been tested with the QPD system before being disassembled microscopically with video documentation, and the clinical disassembly results were recorded on a defect-assessment sheet. The NFE data were separately recorded from the preexisting records. The classification of structural pathology based on the disassembly observations for each of the 264 sites was conducted by the clinical researcher (C.G.S.) who was blinded to the NFE values.

RESULTS

The 264 sites from 22 patients were classified as 8 in the none group, 87 in the moderate group, and 169 in the severe group based on the disassembly findings. The NFE data for the sites were analyzed by using the predefined NFE cutoffs that were independently generated from the previous cumulative logistic regression and decision tree model. For the cumulative logistic regression, 235 out of 264 sites were correctly classified with an agreement of 0.89 (adjusted 95% CI: 0.83-0.95). The number of correctly classified sites for the decision tree model was 234, and the agreement was also 0.89 (adjusted 95% CI: 0.83-0.94). For both cumulative logistic regression and decision tree models, the overall misclassification rate was less than 20% for any restoration material or restoration type. Therefore, the overall performance of NFE classification was consistently good, regardless of restoration material or type. In addition, the sensitivity of the severe category was above 90% for any restoration material or type for the decision tree model.

CONCLUSIONS

The QPD system was found to be a reliable diagnostic aid for classifying structural damage in the categories of none, moderate, or severe based on clinical disassembly findings under the clinical microscope and NFE values. Furthermore, it was determined that restoration type and restoration design were not significant factors in correlating structural pathology with NFE.

Observable characteristics coincident with internal cracks in teeth: Findings from The National Dental Practice-Based Research Network

BACKGROUND

This study determined if there are observable patient-, tooth- and crack-level characteristics markedly associated with whether a tooth with an external crack also has an internal crack.

METHODS

Two hundred nine dentists in The National Dental Practice-Based Research Network enrolled 2,858 adults with a vital permanent posterior tooth having at least 1 observed external crack. Presence and characteristics of internal cracks were recorded for 435 cracked teeth that were treated. Generalized estimating equations were used to identify significant (P < .05) independent odds ratios associated with the tooth having internal cracks.

RESULTS

Overall, 389 teeth (89%) had at least 1 internal crack, with 46% of these teeth having 2 or more internal cracks. Sixty-nine percent of treated cracked teeth were associated with 1 or more types of pain assessed before treatment; 53% were associated with cold testing, 37% with bite testing, and 26% with spontaneous pain. In the final model, biting pain, having an external crack that connected with a restoration, or an external crack that extended onto the root was each associated with more than a 2-fold increased odds of having an internal crack.

CONCLUSIONS

Essentially 9 of 10 teeth that had at least 1 external crack also had at least 1 internal crack.

PRACTICAL IMPLICATIONS

The external cracks that a dental practitioner should be most concerned about, because they are most likely to be associated with internal cracks in the tooth, are those in which the patient experiences biting pain, is connected with a restoration of some type, or extends onto the root.

Quantitative percussion diagnostics as an indicator of the level of the structural pathology of teeth: Retrospective follow-up investigation of high-risk sites that remained pathological after restorative treatment

STATEMENT OF PROBLEM

Structural damage may remain even after a tooth is restored. Conventional diagnostic aids do not quantify the severity of structural damage or allow the monitoring of structural changes after restoration.

PURPOSE

The purpose of this retrospective clinical study was to provide an in-depth analysis of 9 high-risk sites after restoration. The analysis followed structural defects found upon disassembly, restorative materials used, therapeutic procedures provided, current longevity, and long-term quantitative percussion diagnostics (QPD) to monitor results. The hypothesis was that QPD can be used to quantify positive and negative changes in structural stability.

MATERIAL AND METHODS

Sixty sites requiring restoration were part of an institutional review board-approved clinical study. Each participant was examined comprehensively, including QPD testing, at each follow-up. Long-term changes in normal fit error (NFE) values after restoration were evaluated according to a pathology rating system established in an earlier publication. Nine highly compromised sites were chosen for further analysis and monitored for an additional 6 years.

RESULTS

Of the 9 high-risk sites (NFE>0.04), 7 sites improved and 2 sites deteriorated. Potential causes for each trend were documented.

CONCLUSIONS

The data support the hypothesis that QPD can be used to monitor changes in structural stability after restoration. Knowledge of changes in advance of any symptoms allows further preventive or therapeutic intervention before serious structural damage can occur. Follow-up QPD indications of site improvement can also assure the clinician of the desired structural outcome.