Evaluation of color stability of preshaded and liquid-shaded monolithic zirconia

Evaluation of one versus two glaze firings on the color stability and mechanical properties of an extrinsically characterized monolithic CAD-CAM lithium disilicate glass ceramic

PURPOSE

To evaluate the effects of 1 versus 2 glaze firings on the color and mechanical properties of an extrinsically characterized lithium disilicate ceramic after thermal cycling, brushing, or both.

MATERIALS AND METHODS

Eighty specimens were divided into 2 groups: 1 glaze firing (GL1) and 2 glaze firings (GL2). Each group was subdivided into 4 groups (n = 10), according to the experimental conditions: thermal-cycling, brushing, thermal-cycling + brushing, and immersion in distilled water (control). Color variation, surface roughness, and Vickers microhardness were analyzed before each designated experiment and after the simulated periods of 2.5, 5, and 10 years. Three-way mixed ANOVA was used for all outcomes, followed by 1-way ANOVA, repeated measures 1-way ANOVA, Bonferroni post hoc test, and t-test to check for statistical differences (α = 0.05).

RESULTS

Thermal cycling generated greater color changes in the GL1 group at 2.5 and 5 years (p < 0.001; p = 0.013). Brushing generated color changes in GL1 at 5 years (p = 0.003) and in GL2 at 10 years (p = 0.017). Regarding surface roughness, the GL1 group suffered alterations in thermal cycling + brushing at 5 years. In the control group, the GL1 group exhibited higher roughness values than GL2 (p < 0.05). Most of the groups experienced an increase in microhardness at 2.5 years (p < 0.05). In the GL1 group, thermal-cycling increased the microhardness at 5 years (p = 0.006); at 5 and 10 years, the GL1 group had a higher microhardness than the GL2 in thermal-cycling + brushing (p < 0.05).

CONCLUSION

Ceramics with 1 glaze firing showed greater color, roughness, and microhardness changes compared to those submitted to 2 firings.

Effect of hydrothermal aging on color stability and translucency of two zirconia generations compared to lithium disilicate ceramics

Background

An esthetically acceptable ceramic restoration should have optical properties like the teeth and reflect, transmit, and absorb light. The present investigation compared how hydrothermal aging affected the properties of two types of zirconia and lithium disilicate.

Methods

Thirty rectangular samples (12×14×1 mm) were prepared and sectioned from three different ceramic blocks/blanks (n=10), then assigned into three groups according to the ceramic type: group Z: IPS e.max ZirCAD prime, gradient zirconia (3Y/5Y-TZP); group K: Katana UTML (5Y-TZP); and group E: IPS e.max CAD (lithium disilicate). Color analysis of samples was performed before and after hydrothermal aging (1, 3, and 5 hours) using a spectrophotometer. Color difference (∆E00), translucency parameter (TP00), and contrast ratio (CR) were evaluated. The microstructural analysis was performed using x-ray diffraction (XRD). Data were statistically analyzed at a significance level of P<0.05.

Results

A statistically significant variation was observed across means of ∆E00, TP00, and CR at different times. Group Z displayed the highest statistically significant mean ∆E00. Group E demonstrated the greatest statistically significant mean TP00. Group K exhibited the most statistically significant mean CR.

Conclusion

Hydrothermal aging significantly affected the optical characteristics of lithium disilicate and zirconia ceramics. The translucency of samples increased with aging.

Effects of Coloring Liquid Dipping Time and Surface Finishing Procedures on the Optical Properties of Monolithic Zirconia

BACKGROUND

Monolithic zirconia restorations can be produced from self-colored or uncolored blocks. The coloring procedure of uncolored blocks and surface treatments may affect the appearance of the restoration.

AIM

The purpose of this study is to evaluate the effect of liquid coloring and surface treatments on optical properties of translucent monolithic zirconia.

METHODS

All specimens were cut from zirconia blocks with a thickness of 1 mm. Specimens were dipped in the coloring liquids for 3 min, 5 min, and 7 min and then divided into groups of 10 specimens for surface treatments. Glaze and mechanical polishing were applied, and the color of the specimens was measured under the D65 lighting condition with a spectrophotometer device. Color values obtained from the CIE Lab formula and the translucency parameter (TP), opalescence parameter (OP), and contrast ratio (CR) were calculated. The normality of the data was confirmed with the Shapiro-Wilk test. A three-way analysis of variance (ANOVA) was used to assess the effect of dipping time, liquid shade, and surface treatments.

RESULTS

The effect of liquid shade and dipping time on the TP, OP, and CR parameters were statistically significant, and the TP values were reduced with the application of coloring liquid. Mechanical polishing groups had higher OP values and lower TP values than glazed groups.

CONCLUSION

In cases where high translucency is required, it may be advisable to use self-colored blocks and apply glaze as a surface treatment to achieve the desired optical properties.

The metameric effect of monolithic zirconias with varying yttrium ratios

PURPOSE

To evaluate the metameric disparities among monolithic zirconia materials with differing yttrium compositions across various lighting conditions.

MATERIALS AND METHODS

Thirty-six square-shaped zirconia samples measuring 10 × 10 × 0.5 mm were prepared from monolithic zirconia materials with three different yttrium contents. A 0.2 mm thick layer of polymerized dual-polymerizable self-adhesive resin cement was created using a silicone mold with the same dimensions as the prepared zirconia specimens. To evaluate metamerism, color measurements were conducted using a spectrophotometer device on a neutral gray background in a color measurement cabinet that offers four different illumination environments. All samples underwent aging by subjecting them to 10000 thermal cycles using a thermal cycle tester. Following thermal aging, color measurements were taken once more, and the data were recorded using the CIE L*, a*, b* color system. Two-way ANOVA and Post-hoc Bonferroni tests were employed to analyze the data.

RESULTS

It was observed that there was no statistical difference among the color measurements made in different illumination environments of the monolithic zirconia ceramics used to evaluate metamerism (P > .05). This observation remained consistent both before and after thermal aging. After thermal aging, the color of monolithic zirconia materials exhibited a tendency towards red and yellow hues, accompanied by a decrease in brightness levels.

CONCLUSION

It can be stated that different illumination conditions did not affect the metamerism of monolithic zirconia materials, but there was a color change in monolithic zirconia materials after a thermal aging period equivalent to one year.

Influence of coloring techniques on the surface characteristics and color stability of a monolithic zirconia ceramic

STATEMENT OF PROBLEM

The color of monolithic zirconia restorations is obtained by presintering or postsintering coloring techniques. However, studies on the differences in surface characteristics and their influence on color stability are lacking.

PURPOSE

The purpose of this in vitro study was to evaluate the influence of shading and staining techniques for a zirconia ceramic on the surface characteristics and colorimetric parameters (color difference, translucency, and whiteness index) after exposure to coffee or red wine and then polishing.

MATERIAL AND METHODS

Ceramic disks (N=30; Ø10×1mm) were allocated into 3 groups: preshaded-shaded by the manufacturer (IPS e.max ZirCAD MT, shade A2); manually shaded-unshaded zirconia (IPS e.max ZirCAD MT, bleaching shade-BL) colored by the brushing technique, before sintering; stained-unshaded zirconia (IPS e.max ZirCAD MT BL) colored by the staining technique, after sintering. Spectrophotometric color assessments ensured the same initial perceived color (Vita Classical A2) for specimens included in the study (∆E00<1.77 acceptability threshold). Surface characteristics were assessed by scanning electron microscopy and atomic force microscopy. The specimens were immersed in coffee (n=5) or red wine (n=5) for 12 and 24 days and subsequently polished. The data were statistically and descriptively analyzed for color differences (∆E00), translucency parameters (TP00), and whiteness indexes for dentistry (WID), considering acceptability and perceptibility thresholds.

RESULTS

The shaded groups found an irregular ceramic surface with uniformly sized zirconia crystals. The stained group found a glass-covered smoother surface. Significant alterations in color parameters (∆E00, TP00, WID) were observed with immersion in pigmenting beverages (P<.001) both after 12 days, and after 24 days. The shaded specimens had greater color alterations after immersion but benefited from the polishing procedure, which reduced color differences below an acceptable threshold in comparison with the baseline. Stained specimens had lower color alterations after immersion, but the polishing protocol was detrimental as it whitened the ceramic by subsurface exposure.

CONCLUSIONS

The coloring technique influences the surface characteristics of zirconia ceramic and also the color parameters after exposure to colored beverages and polishing.

Influence of manufacturing technique on the color of zirconia restorations: Monolithic versus layered crowns

OBJECTIVES

The study aimed to compare the color of monolithic and layered zirconia crowns fabricated using different brands in the cervical, middle, and incisal areas.

MATERIALS AND METHODS

A total of 45 crowns were fabricated from three brands (Katana, Nacera, Cercon) using three methods (monolithic = ML (n=5), cut-back + enamel = BL (n=5), cut-back + dentin + enamel = TL (n=5)). CIE L*, a* b*, C*, h° color coordinates were recorded with a dental spectrophotometer in cervical, middle, and incisal areas. Color differences between manufacturing techniques, tooth areas, and brands were calculated using the CIEDE2000(1:1:1) formula, and the values were compared to the perceptibility (PT₀₀ ) and acceptability thresholds (AT₀₀ ). Comparisons between color coordinates were analyzed statistically (Kruskal-Wallis and Mann-Whitney U tests, p < 0.001).

RESULTS

Significant differences were found between CIE L*, a*, b*, C*, h° coordinates of the zirconia crowns (p < 0.001), generally. The lowest color differences were obtained between BL and TL crowns in cervical and middle areas. Color differences between cervical and middle areas were mostly below PT₀₀ . An acceptable color difference was found between Katana and Cercon crowns.

CONCLUSIONS

The manufacturing technique and the brand influenced the color of zirconia crowns. Also, the color of the crowns varied from cervical to incisal.

CLINICAL SIGNIFICANCE

Reproducing the optical properties of teeth with ceramic crowns might be challenging, given the differences in the internal configuration of the enamel and dentine, as well as their complex behavior when interacting with light. When deciding whether to fabricate a monolithic crown in translucent zirconia or improve its appearance by layering with more translucent glass-ceramic, the clinicians and dental technicians must be aware of these procedures' effect on the final color of the restorations.

Effect of tooth brush abrasion on the color, gloss and surface roughness of internally and externally stained monolithic ceramic materials

PURPOSE

To measure the durability of the color, change in surface roughness and gloss of stained monolithic ceramic materials subjected to artificial tooth brush abrasion.

MATERIALS AND METHODS

Standardized specimens were manufactured from pressable lithium-disilicate glass ceramic (PC; IPS e.max Press), machinable lithium-disilicate glass ceramic (MC; IPS e.max CAD), and zirconia (ZR; Zenostar). Ceramic staining was applied before (internal; in) and after crystallization/sintering (external; ex). Of each ceramic material, specimens without staining were prepared (no staining; no). Porcelain-fused-to-metal specimens served as control (PFM). Each group consisted of 15 specimens. Tooth brushing was simulated with tooth brushing strokes of 21.6 k, 43.2 k, and 64.8 k. Color, gloss and roughness were measured at baseline and after cycle intervals. Kruskal-Wallis and paired Post-hoc Conover tests were applied to detect statistical differences between treatment groups. Differences before and after aging were calculated by Wilcoxon signed rank test (α=0.05).

RESULTS

In all groups, color difference (∆E) was statistically significant after aging: no-PC (P<.001, 95% CI[0.14,0.84]), no-MC (P=.003, 95% CI[0.23,1.12]), no-ZR (P=.003, 95% CI [0.33,0.62]), in-MC (P=.003, 95% CI[0.35,0.73]), in-ZR (P=.003, 95% CI[0.09,0.32]), ex-PC (P=.003, 95% CI[0.54,0.98]), ex-MC (P<.001, 95% CI[0.23,1.26]), ex-ZR (P=.003, 95% CI[0.27,0.55]), and PFM (P=.002, 95% CI[0.22,0.34]). Aging increased surface roughness and decreased the gloss within all subgroups showing statistical significance.

CONCLUSIONS

Color, gloss and roughness of stained monolithic ceramic materials changed significantly by means of tooth brush abrasion in vitro. Color changes were below the threshold value for the detection by the human eye (∆E 1.8).

Effect of grinding adjustments on the color of monolithic zirconia

STATEMENT OF PROBLEM

Monolithic zirconia restorations have become popular because of their excellent mechanical properties and acceptable esthetics. While the biomechanical properties of zirconia have been investigated, research into their esthetic properties is sparse. Zirconia can be colored by infiltration before sintering, although how occlusal adjustment can affect restoration color is unclear.

PURPOSE

The purpose of this in vitro study was to analyze the color of differently characterized monolithic white and precolored zirconia specimens after standardized grinding.

MATERIAL AND METHODS

White and precolored monolithic zirconia plates (Cercon ht) (n=36) were stained by infiltration with target colors Vita A2, A3.5, and A4. In a standardized experimental arrangement, all plates were ground in 9 steps, and the color was measured with a spectroradiometer at each step. Color differences (ΔE₀₀) were analyzed by using regression analysis, the Kruskal-Wallis test, and the inverse prediction with confidence intervals (α=.05).

RESULTS

Mechanical material removal had a significant effect on the color stability (P<.05) of both white and precolored monolithic zirconia. For each grinding step and each target color, the precolored groups had a significantly lower ΔE₀₀ mean than the white groups (P<.05), except at the 20-μm step for groups W-A4 and P-A4 (P>.05). For target color A2, the difference was significant with P<.001 at all 9 grinding steps. For target color A3.5, the difference was significant with P=.003 at grinding level 20 μm, and P<.001 for all other grinding steps. For target color A4, the difference was not significant with P=.603 at grinding level 20 μm, whereas the difference was significant with P=.007 at grinding level 50 μm, and with P<.001 for all other grinding steps.

CONCLUSIONS

Precolored zirconia had less color change after grinding than white zirconia. This study established grinding depths for white and precolored zirconia corresponding to color perceptibility and acceptability thresholds.

Effect of chemical aging on color stability and surface properties of stained all-ceramic restorations

OBJECTIVES

To study the effect of artificial aging on color stability, translucency, and surface roughness of stained all-ceramic restorations.

MATERIALS AND METHODS

Disc-shaped specimens were fabricated from six different all-ceramic materials: two glass ceramics (Vita Mark II and Empress CAD), two lithium disilicate based ceramics (e.max and Suprinity), and two zirconia-based materials (ZirCAD LT and ZirCAD MT Multi). The discs were stained using two universal stains; ^IPS Ivocolor stain or Vita Akzent stain. Color change (ΔE) and the translucency parameter (TP) were measured before and after artificial aging. The surface roughness (Ra) was evaluated using atomic force microscopy, while the surface microstructure was evaluated using scanning electron microscopy (SEM). Quantitative elemental analysis was performed using the energy dispersive X-ray (EDX). Leached ions were analyzed by inductively coupled plasma (ICP) (n = 12, α = 0.05).

RESULTS

Artificial aging had significantly changed the color (ΔE) and decreased the translucency (TP) of all stained ceramics. The mean surface roughness (Ra) was significantly increased in all specimens, which was also confirmed in the SEM scans. EDX analysis revealed a decrease in the elemental composition of the stained surface as a result of ceramic degradation, except for Ca and Zn in ^IPS Ivocolor stain. Furthermore, the ICP analysis revealed that most compositional elements of stain and glaze were detected in the aging solution.

CONCLUSIONS

Chemical aging had significantly affected the optical parameters and surface texture of stained monolithic ceramics.

CLINICAL SIGNIFICANCE

Stained ceramics are liable to color degradation. Each type of stain should be used with its corresponding type of ceramic. Stained all-ceramic restorations are liable to color change and surface degradation during function.

Patient Satisfaction with Implant-Supported Monolithic and Partially Veneered Zirconia Restorations

The digital workflow and the application of Computer-Aided Manufacturing (CAM) to prosthodontics present the clinician with the possibility of adopting new materials that confer several advantages. Especially in the case of zirconia, these innovations have profoundly changed daily practice. This paper compares the satisfaction and perception of patients who received implant-supported single crowns (SC) and fixed partial dentures (FPD) made from zirconia, either monolithic or partially veneered, after 3 years of follow-up; the success and survival rate of these restorations were also measured. Forty patients, who had been previously treated with implant-supported SC or FPD, either monolithic or partially veneered, and submitted to a yearly maintenance program, were recalled 3 years after their treatment and requested to complete an 8-question questionnaire regarding their perceptions of the treatment. Any mechanical or biological complication that had occurred from the time of delivery was also recorded. Patients that experienced ≥1 complication were less likely to be prone to repeat the treatment. The 3-year success rate was 92.6% for monolithic restoration and 92.3% for partially veneered restoration, while the survival rate was 100% for both restorations. The 3-year follow-up found that monolithic and partially veneered zirconia restorations are both well-accepted treatment options, and patients preferred the veneered restorations (0.76, p < 0.05) from an aesthetic point of view. According to our results, monolithic and veneered zirconia restorations are both reliable treatment options and are both equally accepted by patients.

Effects of Aging on the Color and Translucency of Monolithic Translucent Y-TZP Ceramics: A Systematic Review and Meta-Analysis of In Vitro Studies

Background

Monolithic restorations made of translucent yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) have become popular over the past few decades. However, whether aging affects the color and translucency of monolithic translucent Y-TZP is unclear.

Objective

The aim of this systematic review and meta-analysis of in vitro studies was to evaluate the effects of aging on the color and translucency of monolithic translucent Y-TZP ceramics.

Materials and Methods

This systematic review/meta-analysis was reported according to the PRISMA statement and registered in the OSF registries (https://osf.io/5qjmu). Four databases including Medline via the PubMed, Embase, and Web of Science databases and the Cochrane Library were searched using no publication year and language limits. The last search was executed on November 20, 2020. In vitro studies comparing the translucency and/or color of monolithic translucent Y-TZP ceramics before and after simulated aging were selected. Meta-analyses were performed using Review Manager software (version 5.3, Cochrane Collaboration, Oxford, UK) with random-effects models at a significance level of 0.05. A risk-of-bias assessment was also performed for the included studies.

Results

Of the 188 potentially relevant studies, 13 were included in the systematic review. The hydrothermal aging duration ranged from 1 to 100 h at relatively similar temperatures (~134°C). In the general meta-analyses, the aged Y-TZP ceramics exhibited similar translucency parameter (TP), L^∗, and b^∗ values compared with the nonaged controls (P = .73, P = .49, and P = .62, respectively). Moreover, there was a significant difference between the aged and nonaged Y-TZP ceramics in the a^∗ value (P = .03; MD = −0.26; 95% CI = −0.51 to − 0.02), favoring the nonaged Y-TZP ceramics. The subgroup analyses showed that the duration of aging contributed to changes in the translucency and color of the Y-TZP ceramics.

Conclusions

The optical properties of monolithic translucent Y-TZP ceramics were stable after hydrothermal aging at 134°C and 0.2 MPa for ≤20 h. Moreover, clinically unacceptable changes in the translucency and color of monolithic translucent Y-TZP ceramics were found after hydrothermal aging for >20 h.

Effect of coloring liquids on color of zirconia frameworks and bond strength of zirconia/veneering ceramic

STATEMENT OF PROBLEM

Zirconia substructures must be colored to fabricate esthetic restorations. However, the coloring procedure may affect the color match and bond strength of the veneering ceramic to the zirconia.

PURPOSE

The purpose of this in vitro study was to evaluate the bond strength of veneering ceramic to zirconia after dipping in coloring liquid for different durations and to compare the color of dipped blocks with precolored blocks.

MATERIAL AND METHODS

Sixty-four cube-shaped specimens were fabricated from uncolored zirconia blocks by using computer-aided design and computer-aided manufacturing and divided into 4 groups (n=16). The G30 group was subjected to coloring liquids for 30 seconds, G60 for 60 seconds, and G120 for 120 seconds. After the coloring procedures, the color of the specimens was evaluated by using a spectrophotometer. Precolored zirconia (PCZ) was used as the control. Once the color measurements were completed, the same specimens were prepared for the bond strength test, with 2 groups as the control: PCZ and the uncolored control group (control bond-strength [CBS]). Veneering ceramic was applied to the zirconia specimens and sintered. The shear bond test was conducted using universal testing equipment with a crosshead speed of 1 mm/min. Statistical analysis was carried out by using 1-way ANOVA followed by the Tukey HSD test (α=.05). A Weibull analysis was performed, and the Weibull modulus was calculated for each group.

RESULTS

The mean E value for the PCZ group (77.34 ±0.22) was statistically significantly different from that of all groups (PCZ-G30; P=.018, PCZ-G60; P= <.001, PCZ-G120; P<.001). The mean E value for G60 group was significantly different from mean E values of the G30 and G120 groups (G60-G30; P<.001, G60-G120; P<.001). The PCZ group had the highest mean shear bond strength value (31.5 ±7.67 MPa) and was significantly different from the mean bond strength values of the G120 and CBS groups (PCZ-G120; P=.008, PCZ-CBS; P<.001). The CBS had the lowest mean bond strength value (16.62 ±7.11 MPa) and was statistically significantly lower than that of the G60 group (CBS-G60; P=.001). The Weibull modulus was 64.78 for the PCZ group and 0.1 for the G120 group.

CONCLUSIONS

Immersing zirconia in coloring liquid altered the color and negatively affected the bond strength between the veneering ceramic and zirconia.

Impact of hydrothermal aging on the light transmittance and flexural strength of colored yttria-stabilized zirconia materials of different formulations

STATEMENT OF PROBLEM

Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) materials of different formulations (3Y-TZP, 4Y-TZP, and 5Y-TZP) can be colored by using color liquids. However, practically and clinically relevant factors such as modifications of sintering protocols and hydrothermal aging might affect the extent of light transmittance and flexural strength of zirconia materials of different formulations; studies on these outcomes, however, are lacking.

PURPOSE

The purpose of this in vitro study was to test the impact of hydrothermal aging on the light transmittance and flexural strength of colored zirconia materials compared with a lithium-disilicate (LiSi₂) ceramic.

MATERIAL AND METHODS

A total of 210 specimens were prepared from 3Y-TZP_0.25 (n=30), 3Y-TZP_0.05 (n=30), 5Y-TZP (n=30), 4Y-TZP (n=60), _pre4Y-TZP (preshaded, n=30), and LiSi₂ (n=30). All specimens, except for _pre4Y-TZP and LiSi₂, were manually colored, predried, and either conventionally sintered at 1450 °C (3Y-TZP_0.25, 3Y-TZP_0.05, 5Y-TZP, and half of 4Y-TZP) or high-speed sintered at 1580 °C (other half of 4Y-TZP and _pre4Y-TZP). Light transmittance was measured initially and after 2, 5, 10, 20, 40, and 160 hours of hydrothermal aging (134 °C, 0.2 MPa). Biaxial flexural strength was tested initially and after 160 hours of hydrothermal aging (n=15). The Kolmogorov-Smirnov test, multivariate analysis, and 1-way ANOVA with the Tukey HSD post hoc test, the t test, and linear mixed models were calculated (α=.05).

RESULTS

LiSi₂ showed the highest translucency, followed by 5Y-TZP, 4Y-TZP, _pre4Y-TZP_speed, 3Y-TZP_0.05, and 3Y-TZP_0.25. 4Y-TZP_speed was most opaque and matte. The decrease in translucency related to aging hours was higher for LiS₂ and conventional sintered zirconia materials than for 4Y-TZP_speed and _pre4Y-TZP_speed. Initially, 3Y-TZP_0.25 had the highest flexural strength, followed by 3Y-TZP_0.05, 4Y-TZP, and _pre4Y-TZP_speed. _pre4Y-TZP_speed was comparable with 4Y-TZP_speed but significantly higher than 5Y-TZP. LiSi₂ had the lowest biaxial flexural strength. Hydrothermal aging increased biaxial flexural strength for 3Y-TZP_0.25 and 3Y-TZP_0.05 (P<.001) but decreased it for 5Y-TZP (P=.005) and _pre4Y-TZP_speed (P<.001). After aging, 4Y-TZP_speed showed comparable values of flexural strength with 4Y-TZP (P=.06) and higher values than _pre4Y-TZP_speed after aging (P=.019).

CONCLUSIONS

Manually colored, conventionally sintered 4Y-TZP was resistant to hydrothermal aging regarding flexural strength. High-speed sintering inhibited color development for manually colored 4Y-TZP but did not affect the resistance to hydrothermal aging. The findings were reversed for industrially preshaded 4Y-TZP.

Does the application of surface treatments in different sintering stages affect flexural strength and optical properties of zirconia?

OBJECTIVE

To investigate the influence of surface treatments conducted in presintering and postsintering stages on flexural strength and optical properties of zirconia.

MATERIALS AND METHODS

Specimens were milled from partially sintered zirconia blocks in different geometries and divided into three main groups as presintered, postsintered, and control groups. Test groups were further divided into three subgroups (n = 10) according to the surface treatments conducted (grinding, Er,Cr:YSGG laser irradiation, air-borne particle abrasion [APA]). Four-point flexural strength (σ) test and Weibull analysis were conducted. Color differences (ΔE₀₀ ) and translucency parameter (TP_ab ) were calculated with a spectrophotometer. Surfaces of specimens were scrutinized under FESEM. Data were statistically analyzed.

RESULTS

Postsintered groups exhibited higher σ values (P < .05). Within all groups, highest and lowest σ values were detected at postsintered and presintered APA groups, respectively (P < .05). All ΔE₀₀ values were above the perceptibility threshold (ΔE₀₀  > 0.8). Higher TP_ab values were obtained and deeper scratches were observed in presintered groups.

CONCLUSIONS

Surface treatments performed at postsintering stage had a favorable effect on the flexural strength of all specimens. Surface treatments performed before sintering increased translucency and caused higher ΔE₀₀ values.

CLINICAL SIGNIFICANCE

Surface treatments performed at different sintering stages can alter mechanical and optical properties of zirconia.

Effects of fabrication and shading technique on the color and translucency of new-generation translucent zirconia after coffee thermocycling

STATEMENT OF PROBLEM

The color stability and translucency of preshaded and externally shaded monolithic and veneered new generation translucent zirconia are not well known.

PURPOSE

The purpose of this in vitro study was to investigate the effect of fabrication (veneered or monolithic) and shading (preshaded or externally shaded) techniques on the color and relative translucency of translucent zirconia after coffee thermocycling.

MATERIAL AND METHODS

Specimens of different thicknesses (0.5 mm for veneered and 1.5 mm for monolithic) were sectioned from preshaded and externally shaded translucent zirconia. Externally shaded specimens were colored by using the dipping technique. Externally shaded (Ext Mono) and preshaded (Pre Mono) monolithic zirconia specimens were sintered and glazed. Externally shaded (Ext Vene) and preshaded (Pre Vene) 0.5-mm-thick specimens were sintered, veneered with feldspathic porcelain (1 mm), and glazed. The color coordinates of specimens were measured with a spectroradiometer before and after 10 000 thermocycles in coffee solution. Color differences were calculated using CIEDE2000, and relative translucency parameter (RTP) values were calculated using the RTP_CIEDE2000 formula. Analysis of variance (ANOVA) was used to analyze the CIEDE2000 color differences and RTP values (α=.05).

RESULTS

Shading technique had a significant effect on the color difference values (P=.018). For the translucency data, the 3-way ANOVA revealed a significant interaction between the fabrication technique and shading technique (P=.002). Each pair of material subgroups within each combination of fabrication technique and shading technique was found to have a significantly different RTP, except between Ext Vene and Pre Vene (P=.115).

CONCLUSIONS

Externally shaded translucent zirconia had a greater color change in coffee than the preshaded translucent zirconia, either in monolithic or veneered form. Fabrication technique significantly affected the RTP, and the monolithic zirconia was more translucent than the veneered zirconia.