Effects of nonaldehyde immersion disinfection on the mechanical properties of flexible denture materials

Effects of disinfectants on physical properties of denture base resins: A systematic review and meta-analysis

STATEMENT OF PROBLEM

The disinfection of removable dental prostheses and orthodontic appliances is essential to preventing transmission of pathogens. However, whether different disinfection solutions and durations affect the physical properties of denture base resins is unclear.

PURPOSE

The purpose of this systematic review and meta-analysis was to statistically analyze the influence of disinfectants on the physical properties of denture base resins.

MATERIAL AND METHODS

A systematic search in Medline, Embase, PubMed, and Cochrane Library databases was conducted to evaluate the effects of chemical disinfection on the physical properties of denture base resins such as surface morphology, roughness, hardness, and flexural strength. Of 1909 studies, 44 studies were included in the systematic review and 41 in the meta-analysis. Heterogeneity was analyzed by using I2 statistics. The influence of different disinfection solutions and durations on the physical properties was further analyzed, and the risk of bias evaluated. Statistical analyses were performed by using the RevMan 5.4 software program with the standardized mean differences (SMDs) and 95% confidence intervals (CIs).

RESULTS

Of the 44 included studies, 40 studies were assessed as having a low risk of bias, and 4 had an unclear risk of bias. Meta-analysis results showed that compared with the control, disinfection could not significantly affect surface roughness and hardness within 60 minutes of immersion in disinfectant solutions or flexural strength within 30 minutes (roughness: P=.79, I2=0%; flexural strength: P=.08, I2=0%; hardness: P=.05, I2=19%). In addition, the physical properties were not significantly affected when glutaraldehyde, chlorhexidine, and peracetic acid were repeatedly used for more than 30 minutes.

CONCLUSIONS

Most of the disinfectants did not reduce the physical properties of denture base resin within 30 minutes of immersion. Glutaraldehyde, chlorhexidine, and peracetic acid are recommended if longer immersion or repeated disinfection is required.

Effect of toothbrush/dentifrice abrasion on weight variation, surface roughness, surface morphology and hardness of conventional and CAD/CAM denture base materials

We evaluated the effect of toothbrush/dentifrice brushing on the weight variation and surface properties of different denture bases. Four denture base materials (conventional heat cure, high impact, CAD/CAM, and polyamide resins) were subjected to toothbrushing abrasion (50,000 strokes). The weight value, surface roughness, and topography of each group were determined before and after toothbrushing. The hardness was measured by the Vickers hardness test. Data were analyzed using ANOVA and Bonferroni tests. After toothbrushing, the weight of the polyamide resin had significantly increased; significant weight losses were observed for conventional heat cure and high impact resins, but none for the CAD/CAM resin. The surface roughness of each group increased significantly owing to the wear caused by toothbrushing. The weight variation and surface roughness were not affected by the hardness. Our results suggested that denture base materials deteriorate after brushing with toothpaste, in which the polyamide resin exhibited lower levels of abrasion.