The ability to screw-retain single implant-supported restorations in the anterior maxilla: A CBCT analysis

Incidence of straight and angulated screw channel following immediate implant placement in esthetic zone: A simulated cone-beam computed tomography study

STATEMENT OF PROBLEM

The demand for immediate implant placement (IIP) in the esthetic zone is rapidly increasing. Despite the treatment's benefits, the sagittal root position often dictates implant angulation, commonly necessitating the use of cement-retained restorations. This study investigates the impact of angulated screw channel on IIP in the esthetic zone.

PURPOSE

The purpose of this cone-beam computed tomography (CBCT) study was to determine the probability of IIP in the esthetic zone, using four different implant angulations.

MATERIALS AND METHODS

A retrospective review of CBCT images was conducted and accessed on 9 June 2021. The midsagittal images of maxillary anterior teeth were input into an implant planning software (Implant Studio®). Bone Level X Straumann® implant (BLX 3.5, 3.75, 4.0, 4.5, 5.0 mm) and Bone Level Tapered implant (BLT 2.9, 3.3 mm) were selected for 3D implant planning of IIP in the esthetic zone. The frequency distribution and probability of IIP were recorded and compared among all maxillary anterior teeth.

RESULTS

CBCT images from 720 teeth (120 patient) were evaluated, revealing an overall probability of IIP in the esthetic zone is 76.11% (548/720). Different implant restoration type was evaluated in this study, with the following results; straight screw-retained prosthesis at 3.47% (19/548), cement-retained prosthesis at 14.59% (80/548) and angle screw-retained prosthesis at 85.40% (468/548).

CONCLUSION

IIP with traditional straight screw-retained prosthesis demonstrated the lowest probability. Nevertheless, the use of angulated screw channels enhances the probability of achieving straight screw-retained prostheses.

CLINICAL IMPLICATIONS

The angulated screw channel is essential for increasing the probability of screw-retained prosthesis in IIP in the esthetic zone. However, limitation in screw angle correction still necessitate the use of cement-retained prostheses for numbers of patients undergoing IIP.

The mechanical complications and behavior of angulated dental implant abutment systems versus conventional abutments, a narrative review

Background

Angulated screw channel (ASC) abutment allows off-axis dental implants to be used in dental restorations without the need for cementation. As this is a relatively new system, research on its clinical performance is limited.

Objectives

To summarize the available in-vitro and in-vivo studies on the mechanical and technical issues associated with the ASC system and compare its clinical performance with that of conventional implant-supported abutments.

Methods

A comprehensive literature search in PubMed, Web of Science, and ScienceDirect databases was performed, focusing on articles about angulated (angled) screw channel (ASC) systems published in English between January 2015 and November 2023. Only in-vitro and in-vivo studies were included.

Results

After analyzing the recorded articles, 26 studies (11 in vivo and 15 in vitro) were included in the final discussion and review.

Conclusion

Although the ASC system is still relatively new, and is presently outperformed by conventional abutment systems in terms of technical and mechanical properties, in short- and medium-term in-vivo studies, it was shown reliable for retaining single or multiple-unit implant restorations in both posterior and anterior zones. Still, further long-term clinical research is needed to fully elucidate the risk factors associated with ASC failures.

Comparison of Aesthetic, Mechanical Outcome, and Bone Loss in Angulated Screw Channels (ASCs) and Cement-Retained Implant-Supported Prosthesis: A Case-Control Study

Angulated-screw channels (ASCs) allow the clinician to employ screw-retained restorations in almost all cases, as the access hole can be moved away from the vestibular portion of the crown, where it would jeopardize the final esthetic result. The objective of this study was to compare screw-retained restorations employing ASCs with restorations cemented on angled abutments. In this study, 30 subjects, equally divided into two groups: group 1 (cemented restorations on angulated abutments) and group 2 (screw-retained restorations adopting ASCs), were treated and retrospectively compared after 2 years using the pink esthetic score (PES) and the white esthetic score (WES). All restorations were in use at the last follow-up, with a survival rate of 100%. Three mechanical complications were observed (2 chippings and 1 crown came loose), with a success rate of 93% in group 1 and 87% in group 2 (p > 0.05). No statistically significant differences were reported regarding the esthetic outcome; the marginal bone loss (MBL) showed better results for the screw-retained restorations, both at the distal aspect (group 1 = 0.98 mm ± 0.16; group 2 = 0.45 mm ± 0.06; p = 0.006) and at the mesial aspect (group 1 = 1.04 ± 0.27; group 2 = 0.45 ± 0.005; p < 0.001). From an esthetical perspective, screw-retained restorations with ASCs and cemented restorations on angulated abutments are both effective means of restoring implants; both have excellent esthetic outcomes, but screw-retained restorations have reduced bone loss when compared to cemented ones but are more prone to mechanical complications. Still, our results must be cautiously observed given the reduced dimension of our sample. Larger studies are needed to confirm our findings.

Soft and hard tissue evaluation of guided socket shield implant cases

BACKGROUND

The socket-shield (SS) technique results in long-term functional osseo- and dento-integration, preserving the dimensional stability of hard and soft tissues over time. This study aimed to describe the successful implementation of a surgical technique to facilitate "SS" cases.

METHODS

The cases included males and females aged 32-81 years consecutively treated between 2020 and 2023 (longest follow-up, 3.5 years). For each case, pre- and post-operative cone-beam computed tomography (Digital Imaging and Communications in Medicine files) and intraoral optical scans (IOS; STL files) were performed. Digital immediate implant placement and simultaneous tooth extraction and SS production were planned using an implant planning software. Implants were planned considering sagittal-ridge and tooth-root angular-configuration. Surgical guides were used to perform the digitally-supported SS technique. All cases were planned and surgically performed by one operator (Pedro M. Trejo). Preoperative digital IOS-models were superimposed to post-operative models to assess soft-tissue changes. Pre and post sagittal views were used to assess the radiographic buccal-plate thickness at various healing times. An investigator not involved with case planning or treatment performed measurements.

RESULTS

Results reflected soft-tissue stability with minimal mean thickness change at 0-, 1-, 2-, and 3-mm measurement levels of 0.03, -0.2, 0.14, -0.07, and 0.04 mm, respectively, with a mean gingival-margin change of 0.04 mm. The free gingival-margin change ranged from a 0.58-mm gain in height to a -0.57-mm loss. The mean radiographic buccal-plate thickness post-operatively was 2.04 mm (range, 0.7-2.9 mm).

CONCLUSION

The digitally-supported guided SS technique enables predictable immediate implant-placement positions and stable buccal peri-implant soft and hard tissues over time.

KEY POINTS

Why are these cases new information? The uniqueness of the surgical technique described herein is that it results in favorable positions of immediate, socket-shielded (SSed), implant placements, with soft- and hard-tissue stability as the byproduct. What are the keys to successful management of these cases? Digitally, plan for the best possible implant position within the alveolar housing to satisfy prosthetic requirements, and then adjust this position to accommodate the socket shield dimensions. Digitally, provide a space/gap between the future dentinal shield and the implant. Clinically, allow for time to carve the final position and dimensions of the shield. Plan ahead the extent of the apical third of the SS, and the removal of the apex, if dealing with a long root. What are the primary limitations to success in these cases? Inadequate use of digital technology; case-sensitive technique requires proper execution of each digital and technical clinical step.

Clinical effect of Nobel Biocare angulated screw channel crown compared with cement crown in the aesthetic area: A retrospective cohort study with a mean 32 months follow-up (range 12 to 70 months)

OBJECTIVE

The objective of this study is to compare the clinical efficacy of angulated screw channel abutment applied in the anterior area with regular cemented crowns.

MATERIALS AND METHODS

Forty-eight patients were included and divided into two groups: the angulated screw channel group (ASC) and regular cemented group (RC) in this retrospective cohort study. The evaluation criteria included implant/restoration survival rate, keratinized mucosa width (KMW), bleeding on probing rate (BOP%), probing depth (PD), pink aesthetic score (PES), mechanical/biological complications, emergence angle (EA), the site of implant axis penetrate (SA), marginal bone loss (MBL), and buccal bone thickness (BBT) at 0 mm, 1 mm, 3 mm, 5 mm below the implant shoulder were evaluated in immediate postoperative (T0) and follow-up period (T1).

RESULTS

This retrospective cohort study included a total of 48 patients, with a mean 32 months follow-up period range from 12 months to 70 months. The study did not find any cases of implant failure or restoration failure. EA was significantly wider in the RC group than ASC group (RC: 33.53° ± 8.36° vs ASC: 27.43° ± 8.08°, p = 0.016*). While the BOP% was statistically significant higher in the RC group than ASC group (RC: 28.35% ± 22.92% vs ASC: 13.18% ± 20.00%, p = 0.027*). No significant differences were observed in the other measurements of comparison.

CONCLUSION

Within the limitations of the study, angulated screw channel (Nobel Biocare) crowns might allow the implant axis aim at incisal edge to reduce the emergence angle in the anterior area and benefit the soft-tissue during the 12-70 months follow-up period.

Influence of straight versus angulated screw channel titanium bases on failure loads of two-piece ceramic and titanium implants restored with screw-retained monolithic crowns: An in-vitro study

OBJECTIVE

To analyze the influence of titanium-base (straight [SSC]/angulated-screw-channel [ASC]) on failure-loads and bending-moments of two-piece ceramic and titanium-zirconium implants restored with monolithic-zirconia crowns after fatigue.

MATERIALS AND METHODS

Thirty-two anterior monolithic-screw-retained zirconia crowns were divided into four groups (n = 8/group) according to the factors: (1) type of implant material: two-piece titanium-zirconium implant (Ti-Zr; control-group) versus two-piece ceramic implant (CI; test-group) and (2) type of titanium-base: SSC (0° angle) versus ASC (25°). An intact implant was used for field emission gun-scanning electronic microscopy (FEG-SEM) characterization and Raman spectroscopy for phase analyses and residual stress quantification. All samples were exposed to fatigue with thermodynamic loading (1.2-million-cycles, 49 N, 1.6 Hz, 5-55°C) at a 30° angle. Surviving specimens were loaded until failure (SLF) and bending moments were recorded. Failed samples were examined using light microscope and SEM. Statistical analyses included ANOVA and Mann-Whitney U-test.

RESULTS

Raman-spectroscopy revealed the presence of residual compressive stresses. FEG-SEM revealed a roughened surface between threads and polished surface at the cervical-collar of the ceramic implant. All samples survived fatigue and were free of complications. Mean bending-moments (±SD) were: Ti-Zr-0: 241 ± 45 N cm, Ti-Zr-25: 303 ± 86 N cm, CI-0: 326 ± 58 N cm, CI-25: 434 ± 71 N cm. Titanium-base and implant-material had significant effects in favor of ASC titanium bases (p = .001) and ceramic-implants (p < .001). Failure analysis after SLF revealed severe fractures in ceramic implants, whereas titanium implants were restricted to plastic deformation.

CONCLUSIONS

Ceramic and titanium implants exhibited high reliability after fatigue, with no failures. From a mechanical perspective, titanium bases with ASC can be recommended for both ceramic and titanium implants and are safe for clinical application.

Frequency of screw-retained angulated screw channel single crown following immediate implant placement and provisionalization in the esthetic zone: A cone beam computed tomography study

OBJECTIVE

The purpose of this cone beam computed tomography (CBCT) study was to determine the frequency percentage of screw-retained crown using angulated screw channel (ASC) abutment for single immediate implant placement and provisionalization (IIPP) in the esthetic zone.

METHODS

The CBCT images of 200 patients without disease and without metal restorations in maxillary anterior teeth were evaluated. The mid-sagittal-sectional CBCT images of maxillary anterior teeth (#6-#11) were created in an implant planning software, screen-captured, and transferred to a presentation program. Template of tapered implants with diameter of 3.5 mm (for central and lateral incisors) and 4.3 mm (for central incisors and canines) and lengths of 13, 15, and 18 mm were applied to the sagittal images to identify the IIPP cases. To qualify for IIPP, the implant must engage >35% bone with at least 1 mm of surrounding bone and no perforations. The IIPP cases were further divided into straight screw channel (IIPPSSC) abutment or 25-degree angulated screw channel abutment (IIPPASC), based upon its restorability. The frequency percentages of possible IIPP, IIPPSSC, and IIPPASC were reported and compared among all maxillary anterior teeth.

RESULTS

A total of 1200 maxillary anterior teeth sagittal images from 200 patients (88 male and 112 female) with a mean age of 51.3 years (range 20-83 years) were evaluated in this study. The overall frequency percentages of IIPP, IIPPSSC, and IIPPASC possibility were 84% (74%-92%), 14% (10%-24%), and 75% (66%-87%), respectively.

CONCLUSION

Within the limitations of this CBCT study, 90% of single IIPP in the esthetic zone can be restored with screw-retained crown when utilizing ASC. In addition, the possibility of using a screw-retained restoration following IIPP increases about five times with ASC abutment compared to the SSC abutment.

Implant prosthodontic design as a predisposing or precipitating factor for peri-implant disease: A review

Over the past decade, emerging evidence indicates a strong relationship between prosthetic design and peri-implant tissue health. The objective of this narrative review was to evaluate the evidence for the corresponding implant prosthodontic design factors on the risk to peri-implant tissue health. One of the most important factors to achieve an acceptable implant restorative design is the ideal implant position. Malpositioned implants often result in a restorative emergence profile at the implant-abutment junction that can restrict the access for patients to perform adequate oral hygiene. Inadequate cleansability and poor oral hygiene has been reported as a precipitating factors to induce the peri-implant mucositis and peri-implantitis and are influenced by restorative contours. The implant-abutment connection, restorative material selection and restoration design are also reported in the literature as having the potential to influence peri-implant sort tissue health.

The Application of Angulated Screw-Channels in Metal-Free, Implant-Supported Restorations: A Retrospective Survival Analysis

Angulated screw channels (ASC) allow the clinician to reposition the access hole of screw-retained restorations, improving the design of the rehabilitation and the esthetic outcome. Few clinical studies are available on the efficacy of these restorations, especially at longer follow-ups and with a large number of subjects. The objective of this study was therefore to retrospectively evaluate patients rehabilitated with screw-retained restorations using ASC. The time of delivery and their adherence to the maintenance program was obtained, as well as the characteristics of the restoration and of the patient's occlusion; a Kaplan-Meier survival curve was then built to investigate the success rate of these restorations and the effects of several variables were evaluated with a Cox model. A total of 105 subjects and 162 implants were enrolled in this study; after 42 months a success rate (92%) similar to what is reported for conventional screw-retained restorations was encountered. Monolithic zirconia restorations (n = 52) had a higher success rate (95%) when compared to partially veneered restorations (n = 53), which suffered a higher number of complications (90%). The other variables had no statistically significant effect. Implant supported prostheses adopting ASC provide a favorable outcome both in the posterior and anterior regions and can therefore be adopted to treat cases where the implant angulation is unfavorable for a conventional screw-retained prosthesis.