Three-Dimensionally Printed On-Skin Radiation Shields Using High-Density Filament

Technical note: A comparison of in-house 3D-printed and commercially available patient-specific skin collimators for use with electron beam therapy

PURPOSE

Skin collimation is a useful tool in electron beam therapy (EBT) to decrease the penumbra at the field edge and minimize dose to nearby superficial organs at risk (OARs), but manually fabricating these collimation devices in the clinic to conform to the patient's anatomy can be a difficult and time intensive process. This work compares two types of patient-specific skin collimation (in-house 3D printed and vendor-provided machined brass) using clinically relevant metrics.

METHODS

Attenuation measurements were performed to determine the thickness of each material needed to adequately shield both 6 and 9 MeV electron beams. Relative and absolute dose planes at various depths were measured using radiochromic film to compare the surface dose, flatness, and penumbra of the different skin collimation materials.

RESULTS

Clinically acceptable thicknesses of each material were determined for both 6 and 9 MeV electron beams. Field width, flatness, and penumbra results between the two systems were very similar and significantly improved compared to measurements performed with no surface collimation.

CONCLUSION

Both skin collimation methods investigated in this work generate sharp penumbras at the field edge and can minimize dose to superficial OARs compared to treatment fields with no surface collimation. The benefits of skin collimation are greatest for lower energy electron beams, and the benefits decrease as the measurement depth increases. Using bolus with skin collimation is recommended to avoid surface dose enhancement seen with collimators placed on the skin surface. Ultimately, the appropriate choice of material will depend on the desire to create these devices in-house or outsource the fabrication to a vendor.

Technical report: 3D-printed patient-specific scalp shield for hair preservation in total skin electron beam therapy

•Techniques for non-lead scalp-shielding in total skin therapy are lacking.•3D-printing is a promising technique for patient-specific conformal shielding.•We present a case of effective scalp shielding with 3D-printing.