Isolation and characterization of Salmonella spp. from food and food contact surfaces in a chicken processing factory

Inhibitory effects of nafcillin and diosmin on biofilm formation by Salmonella Typhimurium

OBJECTIVE

The foodborne pathogen Salmonella enterica serovar Typhimurium causes self-limiting gastroenteritis in humans and is difficult to eliminate due to its ability to adhere to surfaces and form biofilms that exhibit high resistance to antimicrobial agents. To explore alternative strategies for biofilm treatment, it is essential to investigate novel agents that inhibit Salmonella biofilms.

METHOD

In this study, we investigated the minimum biofilm inhibitory concentrations (MBICs) and minimum biofilm eradication concentrations (MBECs) of nafcillin and diosmin, both previously identified as Lon protease inhibitors, against biofilms formed by S. Typhimurium. Furthermore, we examined the expression of genes associated with the type II toxin-antitoxin system to enhance our understanding of the impact of these inhibitors.

RESULTS

The findings indicated a strong antibiofilm effect of nafcillin, with MBIC and MBEC values of 8 µg/mL and 32 µg/mL, respectively. These results were confirmed by field emission scanning electron microscopy (FE-SEM), which showed that biofilm formation was reduced in the presence of nafcillin. Additionally, it revealed morphological changes in the bacteria within the nafcillin-treated biofilms. Furthermore, gene expression analyses demonstrated a significant reduction in the expression of type II TA system genes following treatment with nafcillin and diosmin.

CONCLUSION

This study highlights the effectiveness of nafcillin in disrupting the biofilms of S. Typhimurium. These results suggest promising avenues for the development of novel therapeutic strategies targeting biofilms associated with S. Typhimurium.

The challenges and prospects of using cold plasma to prevent bacterial contamination and biofilm formation in the meat industry

The risk of foodborne disease outbreaks increases when the pathogenic bacteria are able to form biofilms, and this presents a major threat to public health. An emerging non-thermal cold plasma (CP) technology has proven a highly effective method for decontaminating meats and their products and extended their shelf life. CP treatments have ability to reduce microbial load and, biofilm formation with minimal change of color, pH value, and lipid oxidation of various meat and meat products. The CP technique offers many advantages over conventional processing techniques due to its layout flexibility, nonthermal behavior, affordability, and ecological sustainability. The technology is still in its infancy, and continuous research efforts are needed to realize its full potential in the meat industry. This review addresses the basic principles and the impact of CP technology on biofilm formation, meat quality (including microbiological, color, pH value, texture, and lipid oxidation), and microbial inactivation pathways and also the prospects of this technology.

Insights into the mechanisms and key factors influencing biofilm formation by Aeromonas hydrophila in the food industry: A comprehensive review and bibliometric analysis

Biofilm formation by Aeromonas hydrophila in the food industry poses significant challenges to food safety and quality. Therefore, this comprehensive review aimed to provide insights into the mechanisms and key factors influencing A. hydrophila biofilm formation. It explores the molecular processes involved in initial attachment, microcolony formation, and biofilm maturation; moreover, it concurrently examines the impact of intrinsic factors, including quorum sensing, cyclic-di-GMP, the efflux pump, and antibiotic resistance, as well as environmental conditions, such as temperature, nutrient availability, and osmotic pressure, on biofilm architecture and resilience. Furthermore, the article highlights the potential of bibliometric analysis as a promising method for conceptualizing the research landscape of and identifying knowledge gaps in A. hydrophila biofilm research. The findings underscore the requirement for focused interventions that prevent biofilm development and raise food sector safety. The consolidation of current information and incorporation of bibliometric analysis enhances existing understanding of A. hydrophila biofilm formation and offers insights for future research and control strategies within a food industry context.

Quantification of Salmonella transfer in cross-contamination scenarios found in chicken slaughterhouses

Chicken are among the main reservoirs of Salmonella, and slaughterhouses have been identified as key sites for cross-contamination of this pathogen. This study aimed to quantify the transfer rate of Salmonella in different cross-contamination scenarios found in chicken slaughterhouses. To this end, a pool of Salmonella spp. Was inoculated onto chicken carcasses and thighs, reaching out concentrations of 2-5 log10 CFU/g. After inoculation, carcasses and thighs were used to reproduce four cross-contamination scenarios based on industrial reality as follows: 1. Transfer of Salmonella from chicken carcasses to stainless steel and polyethylene surfaces; 2. Transfer of Salmonella between hanging chicken carcasses; 3. Transfer of Salmonella from stainless steel surfaces to chicken carcasses, and 4. Transfer of Salmonella from thighs to stainless steel and polyethylene surfaces. The results showed that the transfer rates (TR) of Salmonella on the chicken carcass to stainless steel and polyethylene were 25.77 ± 22.63% and 24.71 ± 13.93%, respectively, while the TR between hanged chicken carcasses was 5.11 ± 1.71%. When sliding carcasses through a stainless steel ramp, 41.47 ± 1.32% of the Salmonella present on the ramp adhered to the chicken carcasses, and the greater transfer seems to be linked to the wet surfaces. The transfer rates from the thighs to the stainless steel and polyethylene were 1.81 ± 0.66% and 9.0 ± 1.34%, respectively. Cross-contamination occurred regardless of the sample weight, time of contact, and amount of inoculum.

Progress in research on the safety of silicone rubber products in food processing

Silicone rubber (SR) is widely used in the food processing industry due to its excellent physical and chemical properties. However, due to the differences in SR product production formulas and processes, the quality of commercially available SR products varies greatly, with chemical and biological hazard potentials. Residual chemicals in SR, such as siloxane oligomers and 2,4-dichlorobenzoic acid, are non-intentionally added substances, which may migrate into food during processing so the safe use of SR must be guaranteed. Simultaneously, SR in contact with food is susceptible to pathogenic bacteria growing and biofilm formation, like Cronobacter sakazakii, Staphylococcus aureus, Salmonella enteritidis, and Listeria monocytogenes, posing a food safety risk. Under severe usage scenarios such as high-temperature, high-pressure, microwave, and freezing environments with long-term use, SR products are more prone to aging, and their degradation products may pose potential food safety hazards. Based on the goal of ensuring food quality and safety to the greatest extent possible, this review suggests that enterprises need to prepare high-quality food-contact SR products by optimizing the manufacturing formula and production process, and developing products with antibacterial and antiaging properties. The government departments should establish quality standards for food-contact SR products and conduct effective supervision. Besides, the reusable SR products should be cleaned by consumers immediately after use, and the deteriorated products should be replaced as soon as possible.

Heavy metal toxicity in poultry: a comprehensive review

Arsenic (As), lead (Pb), cadmium (Cd), and mercury (Hg) have been recognized as most toxic heavy metals that are continuously released into the environment, both from natural sources and from anthropogenic production of fertilizers, industrial activities, and waste disposal. Therefore, As, Cd, Hg, and Pb are found in increasing concentrations in bodies of water, fodder, feed, and in the tissues of livestock, including poultry, in the surroundings of industrial areas, leading to metabolic, structural, and functional abnormalities in various organs in all animals. In poultry, bioaccumulation of As, Pb, Cd, and Hg occurs in many organs (mainly in the kidneys, liver, reproductive organs, and lungs) as a result of continuous exposure to heavy metals. Consumption of Cd lowers the efficiency of feed conversion, egg production, and growth in poultry. Chronic exposure to As, Pb, Cd, and Hg at low doses can change the microscopic structure of tissues (mainly in the brain, liver, kidneys, and reproductive organs) as a result of the increased content of these heavy metals in these tissues. Histopathological changes occurring in the kidneys, liver, and reproductive organs are reflected in their negative impact on enzyme activity and serum biochemical parameters. Metal toxicity is determined by route of exposure, length of exposure, and absorbed dosage, whether chronic and acute. This review presents a discussion of bioaccumulation of As, Cd, Pb, and Hg in poultry and the associated histopathological changes and toxic concentrations in different tissues.

Potential Application of Muscle Precursor Cells from Male Specific-Pathogen-Free (SPF) Chicken Embryos in In Vitro Agriculture

This study examined the potential benefits of male specific-pathogen-free (SPF) White Leghorn embryos in cellular agriculture for sustainable and ethical poultry meat production-addressing traditional farming challenges, including disease outbreaks of Salmonella and Avian influenza. We isolated myogenic precursor cells (MPCs) from the thigh muscles (Musculus femoris) of 12.5-day-old embryos from 10 SPF White Leghorns that tested negative for Salmonella. We randomly selected MPCs from three males and three females, isolated them using a modified pre-plating (pp) method, and compared their in vitro development. After 1 h (pp1) and 2 h (pp2) of incubation, they were transferred to a new dish to remove fast-adhering cells and cultured (pp3). Isolated MPCs had a 69% positive reaction to Pax7. During proliferation, no differences were observed in PAX7, MYF5, or MYOD expression between the male and female MPCs. However, after five days of differentiation, the expression of late myogenic factors-MYOG and MYF6-significantly increased in all MPCs. Notably, MYOG expression was 1.9 times higher in female than in male MPCs. This impacted MYMK's expression pattern. Despite this, the myotube fusion index did not differ between the sexes. Muscle cells from male SPF-laying chicken embryos are promising for developing clean animal-cell-derived protein sources via resource recycling.

Inhibitory effects of vorinostat (SAHA) against food-borne pathogen Salmonella enterica serotype Kentucky mixed culture biofilm with virulence and quorum-sensing relative expression

Salmonella is a food-borne microorganism that is also a zoonotic bacterial hazard in the food sector. This study determined how well a mixed culture of Salmonella Kentucky formed biofilms on plastic (PLA), silicon rubber (SR), rubber gloves (RG), chicken skin and eggshell surfaces. In vitro interactions between the histone deacetylase inhibitor-vorinostat (SAHA)-and S. enterica serotype Kentucky were examined utilizing biofilms. The minimum inhibitory concentration (MIC) of SAHA was 120 µg mL-1. The addition of sub-MIC (60 µg mL-1) of SAHA decreased biofilm formation for 24 h on PLA, SR, RG, Chicken skin, and eggshell by 3.98, 3.84, 4.11, 2.86 and 3.01 log (p < 0.05), respectively. In addition, the initial rate of bacterial biofilm formation was higher on chicken skin than on other surfaces, but the inhibitory effect was reduced. Consistent with this conclusion, virulence genes expression (avrA, rpoS and hilA) and quorum-sensing (QS) gene (luxS) was considerably downregulated at sub-MIC of SAHA. SAHA has potential as an anti-biofilm agent against S. enterica serotype Kentucky biofilm, mostly by inhibiting virulence and quorum-sensing gene expression, proving the histone deacetylase inhibitor could be used to control food-borne biofilms in the food industry.

Current and future interventions for improving poultry health and poultry food safety and security: A comprehensive review

Poultry is thriving across the globe. Chicken meat is the most preferred poultry worldwide, and its popularity is increasing. However, poultry also threatens human hygiene, especially as a fomite of infectious diseases caused by the major foodborne pathogens (Campylobacter, Salmonella, and Listeria). Preventing pathogenic bacterial biofilm is crucial in the chicken industry due to increasing food safety hazards caused by recurring contamination and the rapid degradation of meat, as well as the increased resistance of bacteria to cleaning and disinfection procedures commonly used in chicken processing plants. To address this, various innovative and promising strategies to combat bacterial resistance and biofilm are emerging to improve food safety and quality and extend shelf-life. In particular, natural compounds are attractive because of their potential antimicrobial activities. Natural compounds can also boost the immune system and improve poultry health and performance. In addition to phytochemicals, bacteriophages, nanoparticles, coatings, enzymes, and probiotics represent unique and environmentally friendly strategies in the poultry processing industry to prevent foodborne pathogens from reaching the consumer. Lactoferrin, bacteriocin, antimicrobial peptides, cell-free supernatants, and biosurfactants are also of considerable interest for their prospective application as natural antimicrobials for improving the safety of raw poultry meat. This review aims to describe the feasibility of these proposed strategies and provide an overview of recent published evidences to control microorganisms in the poultry industry, considering the human health, food safety, and economic aspects of poultry production.

Identification and characterization of MDR virulent Salmonella spp isolated from smallholder poultry production environment in Edo and Delta States, Nigeria

Salmonella is responsible for some foodborne disease cases worldwide. It is mainly transmitted to humans through foods of animal origin through the consumption of poultry products. The increased international trade and the ease of transboundary movement could propel outbreaks of local origin to translate into severe global threats. The present study aimed to characterize Salmonella serovars isolated from poultry farms in Edo and Delta States, Nigeria. A total of 150 samples (faecal, water and feed) were collected from ten poultry farms between January and August 2020 and analyzed for Salmonella characterization using standard bacteriological and molecular methods. Salmonella serovars identified include: Salmonella Enteritidis [n = 17 (39.5%)], Salmonella Typhimurium [n = 13 (30.2%)] and other Salmonella serovars [n = 13 (30.2%)]. All Salmonella serovars were cefotaxime and ampicillin resistant. The presence of the invA gene ranged from 9(69.2%) to 15(88.2%). The spvC gene ranged from 2(14.4%) to 10(58.8%). All Salmonella serovars had sdiA gene. The Salmonella isolates produced some extracellular virulence factors (such as protease, lipase, β-hemolytic activity, and gelatinase), while 13(30.2%) of the overall isolates formed strong biofilms. In conclusion, the detection of multiple antibiotic-resistant Salmonella serovars in faecal sources, which also exhibited virulence determinants, constituted a public health risk as these faecal samples have the potential as manure in the growing of crops. These pathogens can be transmitted to humans nearby and through poultry products, resulting in difficult-to-treat infections and economic loss.

Electrochemical Control of Biofilm Formation and Approaches to Biofilm Removal

This review deals with microbial adhesion to metal-based surfaces and the subsequent biofilm formation, showing that both processes are a serious problem in the food industry, where pathogenic microorganisms released from the biofilm structure may pollute food and related material during their production. Biofilm exhibits an increased resistance toward sanitizers and disinfectants, which complicates the removal or inactivation of microorganisms in these products. In the existing traditional techniques and modern approaches for clean-in-place, electrochemical biofilm control offers promising technology, where surface properties or the reactions taking place on the surface are controlled to delay or prevent cell attachment or to remove microbial cells from the surface. In this overview, biofilm characterization, the classification of bacteria-forming biofilms, the influence of environmental conditions for bacterial attachment to material surfaces, and the evaluation of the role of biofilm morphology are described in detail. Health aspects, biofilm control methods in the food industry, and conventional approaches to biofilm removal are included as well, in order to consider the possibilities and limitations of various electrochemical approaches to biofilm control with respect to potential applications in the food industry.

Impact of Quercetin against Salmonella Typhimurium Biofilm Formation on Food-Contact Surfaces and Molecular Mechanism Pattern

Quercetin is an active nutraceutical element that is found in a variety of foods, vegetables, fruits, and other products. Due to its antioxidant properties, quercetin is a flexible functional food that has broad protective effects against a wide range of infectious and degenerative disorders. As a result, research is required on food-contact surfaces (rubber (R) and hand gloves (HG)) that can lead to cross-contamination. In this investigation, the inhibitory effects of quercetin, an antioxidant and antibacterial molecule, were investigated at sub-MIC (125; 1/2, 62.5; 1/4, and 31.25; 1/8 MIC, μg/mL) against Salmonella Typhimurium on surfaces. When quercetin (0−125 μg/mL) was observed on R and HG surfaces, the inhibitory effects were 0.09−2.49 and 0.20−2.43 log CFU/cm2, respectively (p < 0.05). The results were confirmed by field emission scanning electron microscopy (FE-SEM), because quercetin inhibited the biofilms by disturbing cell-to-cell connections and inducing cell lysis, resulting in the loss of normal cell morphology, and the motility (swimming and swarming) was significantly different at 1/4 and 1/2 MIC compared to the control. Quercetin significantly (p < 0.05) suppressed the expression levels of virulence and stress response (rpoS, avrA, and hilA) and quorum-sensing (luxS) genes. Our findings imply that plant-derived quercetin could be used as an antibiofilm agent in the food industry to prevent S. Typhimurium biofilm formation.

Genetic Characterization of Salmonella Infantis with Multiple Drug Resistance Profiles Isolated from a Poultry-Farm in Chile

Salmonella comprises over 2500 serotypes and foodborne contamination associated with this pathogen remains an important health concern worldwide. During the last decade, a shift in serotype prevalence has occurred as traditionally less prevalent serotypes are increasing in frequency of infections, especially those related to poultry meat contamination. S. Infantis is one of the major emerging serotypes, and these strains commonly display antimicrobial resistance and can persist despite cleaning protocols. Thus, this work aimed to isolate S. Infantis strains from a poultry meat farm in Santiago, Chile and to characterize genetic variations present in them. We determined their genomic and phenotypic profiles at different points along the production line. The results indicate that the strains encompass 853 polymorphic sites (core-SNPs) with isolates differing from one another by 0-347 core SNPs, suggesting variation among them; however, we found discrete correlations with the source of the sample in the production line. Furthermore, the pan-genome was composed of 4854 total gene clusters of which 2618 (53.9%) corresponds to the core-genome and only 181 (3.7%) are unique genes (those present in one particular strain). This preliminary analysis will enrich the surveillance of Salmonella, yet further studies are required to assess their evolution and phylogeny.

The application of bacteriophage to control Cronobacter sakazakii planktonic and biofilm growth in infant formula milk

The goal was to identify the biofilm-forming ability of Cronobacter sakazakii on surfaces of stainless steel (SS) and silicone rubber (SR) in contact with infant formula milk. Two representative bacteriophages (PBES04 and PBES19) were used to control the growth of C. sakazakii as well as its biofilm forming ability on either SS or SR surfaces. Bacterial growth was confirmed at 20 °C when PBES04 and PBES19 were used, whereas C. sakazakii was not normally detected in infant formula milk treated with both bacteriophages for 6 h. In an additional biofilm reduction experiment, the biofilm on SS or SR surfaces were reduced by 3.07 and 1.92 log CFU cm^-2, respectively after PBES04 treatment, and 3.06 and 2.14 log CFU cm^-2, respectively, after PBES19 treatment. These results demonstrate that bacteriophages can be effective in inactivating C. sakazakii in biofilms which could potentially increase food safety in commercial facilities.