Maintaining image quality and reducing dose in prospectively-triggered CT coronary angiography: A systematic review of the use of iterative reconstruction

Evaluation of an integrated 3D-printed phantom for coronary CT angiography using iterative reconstruction algorithm

INTRODUCTION

3D-printed imaging phantoms are now increasingly available and used for computed tomography (CT) dose optimisation study and image quality analysis. The aim of this study was to evaluate the integrated 3D-printed cardiac insert phantom when evaluating iterative reconstruction (IR) algorithm in coronary CT angiography (CCTA) protocols.

METHODS

The 3D-printed cardiac insert phantom was positioned into a chest phantom and scanned with a 16-slice CT scanner. Acquisitions were performed with CCTA protocols using 120 kVp at four different tube currents, 300, 200, 100 and 50 mA (protocols A, B, C and D, respectively). The image data sets were reconstructed with a filtered back projection (FBP) and three different IR algorithm strengths. The image quality metrics of image noise, signal-noise ratio (SNR) and contrast-noise ratio (CNR) were calculated for each protocol.

RESULTS

Decrease in dose levels has significantly increased the image noise, compared to FBP of protocol A (P < 0.001). As a result, the SNR and CNR were significantly decreased (P < 0.001). For FBP, the highest noise with poor SNR and CNR was protocol D with 19.0 ± 1.6 HU, 18.9 ± 2.5 and 25.1 ± 3.6, respectively. For IR algorithm, the highest strength (AIDR3Dstrong ) yielded the lowest noise with excellent SNR and CNR.

CONCLUSIONS

The use of IR algorithm and increasing its strengths have reduced noise significantly and thus increased the SNR and CNR when compared to FBP. Therefore, this integrated 3D-printed phantom approach could be used for dose optimisation study and image quality analysis in CCTA protocols.

A comprehensive review of dual-energy and multi-spectral computed tomography

This review will provide a brief introduction to the development of the first Computed Tomography (CT) scan, from the beginnings of x-ray imaging to the first functional CT system introduced by Godfrey Houndsfield. The principles behind photon interactions and the methods by which they can be leveraged to generate dual-energy or multi-spectral CT images are discussed. The clinical applications of these methodologies are investigated, showing the immense potential for dual-energy or multi-spectral CT to change the fields of in-vivo and non-destructive imaging for quantitative analysis of tissues and materials. Lastly the current trends of research for dual-energy and multi-spectral CT are covered, showing that the majority of instrument development is focused on photon counting detectors for mutli-spectral CT and that clinical research is dominated by validation studies for the implementation of dual-energy and multi-spectral CT.

Low tube voltage prospectively ECG-triggered coronary CT angiography: a systematic review of image quality and radiation dose

OBJECTIVE

This study aimed (1) to perform a systematic review on scanning parameters and contrast medium (CM) reduction methods used in prospectively electrocardiography (ECG-triggered low tube voltage coronary CT angiography (CCTA), (2) to compare the achievable dose reduction and image quality and (3) to propose appropriate scanning techniques and CM administration methods.

METHODS

A systematic search was performed in PubMed, the Cochrane library, CINAHL, Web of Science, ScienceDirect and Scopus, where 20 studies were selected for analysis of scanning parameters and CM reduction methods.

RESULTS

The mean effective dose (H_E) ranged from 0.31 to 2.75 mSv at 80 kVp, 0.69 to 6.29 mSv at 100 kVp and 1.53 to 10.7 mSv at 120 kVp. Radiation dose reductions of 38 to 83% at 80 kVp and 3 to 80% at 100 kVp could be achieved with preserved image quality. Similar vessel contrast enhancement to 120 kVp could be obtained by applying iodine delivery rate (IDR) of 1.35 to 1.45 g s^-1 with total iodine dose (TID) of between 10.9 and 16.2 g at 80 kVp and IDR of 1.08 to 1.70 g s^-1 with TID of between 18.9 and 20.9 g at 100 kVp.

CONCLUSION

This systematic review found that radiation doses could be reduced to a rate of 38 to 83% at 80 kVp, and 3 to 80% at 100 kVp without compromising the image quality. Advances in knowledge: The suggested appropriate scanning parameters and CM reduction methods can be used to help users in achieving diagnostic image quality with reduced radiation dose.