Advantages and challenges of high-dose thermoluminescent detectors

Effect of structural changes on luminescent and dosimetric properties of nanoscale aluminum oxide

Variations of the particle size and porosity of the alumina ceramics synthesized by annealing compacted nanopowder at 1500-1700°С in vacuum for various periods of time have been studied by SEM. Particle size distributions, which depend on the conditions of the ceramics synthesis, were obtained and discussed. The formation of fine grains and the growth of their fraction with the increasing annealing temperature increase the thermoluminescence intensity and expands the usable dose range upwards.

Dosimetric response for crystalline and nanostructured aluminium oxide to a high-current pulse electron beam

The main thermoluminescent (TL) and dosimetric properties of the detectors based on anion-defective crystalline and nanostructured aluminium oxide after exposure to a high-current pulse electron beam are studied. TL peaks associated with deep-trapping centres are registered. It is shown that the use of deep-trap TL at 200-600°С allows registering absorbed doses up to 750 kGy for single-crystalline detectors and those up to 6 kGy for nanostructured ones. A wide range of the doses registered, high reproducibility of the TL signal and low fading contribute to a possibility of using single-crystalline and nanostructured aluminium oxide for the dosimetry of high-current pulse electron beams.

Thermoluminescent Phosphors for Radiation Dosimetry

The use of thermoluminescence (TL) as a method for radiation dosimetry of ionizing radiation has been established for many decades and has found many useful applications in various fields, such as personnel and environmental monitoring, retrospective dosimetry, medical dosimetry, space dosimetry, high-dose dosimetry. Method of preparation, studies and applications of thermoluminescence (TL) dosimetric materials are reviewed. Several high sensitivity thermoluminescent dosimeters (TLDs) are now commercially available in different physical forms. These commercial TL dosimeters comply with a set of stringent requirements stipulated by the International Electrotechnical Commission (IEC). Specific features of TL phosphors for thermal neutron, fast neutron and high-energy charged particle (HCP) dosimetry are also considered. Some of the recent developments in the field of optically stimulated luminescence (OSL) and radiophotoluminescence (RPL) are also summarized. Comparative advantages of TL, OSL and RPL dosimeters are given. Results of recent studies of TL in nanosized materials are briefly presented. Future challenges in this field will also be discussed. Contents of Paper