Evaluation of calibration methods of Exradin W2 plastic scintillation detector for CyberKnife small-field dosimetry

Evaluation of output factors of different radiotherapy planning systems using Exradin W2 plastic scintillator detector

This study aims to evaluate the output factors (OPF) of different radiation therapy planning systems (TPSs) using a plastic scintillator detector (PSD). The validation results for determining a practical field size for clinical use were verified. The implemented validation system was an Exradin W2 PSD. The focus was to validate the OPFs of the small irradiation fields of two modeled radiation TPSs using RayStation version 10.0.1 and Monaco version 5.51.10. The linear accelerator used for irradiation was a TrueBeam with three energies: 4, 6, and 10 MV. RayStation calculations showed that when the irradiation field size was reduced from 10 × 10 to 0.5 × 0.5 cm2, the results were within 2.0% of the measured values for all energies. Similarly, the values calculated using Monaco were within approximately 2.0% of the measured values for irradiation field sizes between 10 × 10 and 1.5 × 1.5 cm2 for all beam energies of interest. Thus, PSDs are effective validation tools for OPF calculations in TPS. A TPS modeled with the same source data has different minimum irradiation field sizes that can be calculated. These findings could aid in verification of equipment accuracy for treatment planning requiring highly accurate dose calculations and for third-party evaluation of OPF calculations for TPS.

Dosimetric characterization of a novel commercial plastic scintillation detector with an MR-Linac

BACKGROUND

Plastic scintillators have been used as radiation detectors for the past few years, as they are water-equivalent and independent of the dose, dose rate, and angle of incidence. In addition, they are also independent of the presence of a magnetic field and could be used for in vivo dosimetry in an MR-Linac. With the advent of a new commercial scintillation detector, Blue Physics Model 10, its characterization has been performed on an MR-Linac with a view to future applications.

PURPOSE

To perform the dosimetric characterization and study potential applications of a novel commercial plastic scintillation detector in a MR-Linac.

METHODS

Scintillation detector description, calibration procedure, short-term repeatability, dose-response linearity, dose-rate dependence, angular dependence, and temperature dependence have been studied. Percent-depth-dose (PDD) and beam profiles were measured for small fields and a standard field, as well as output factors, for comparison with other PTW detectors: a diamond diode and PinPoint and Semiflex 3D ionization chambers. The suitability of the plastic scintillator for in vivo dosimetry in a magnetic field has also been studied measuring the dose to a point in an anthropomorphic phantom while acquiring MR imaging. This measured dose was compared with that calculated with Monaco planning system and with that measured with a PTW Semiflex 3D chamber, the latter without acquiring MR images.

RESULTS

Short-term repeatability presented negligible variations (<0.4%) for 100 and 20 MU. Similar results were obtained for dose-response linearity and dose-rate dependence. A small angular dependence was determined, while the scintillator resulted practically independent of the temperature. PDDs showed excellent agreement except in the build-up region, and calculated penumbras with the profiles given by the scintillator were between the ones obtained with the diamond detector and the PinPoint ionization chamber. Measured OF with the scintillator were the highest between all detectors, 1.26% higher than the value obtained with the microdiamond for the smallest field measured, 0.5 × 0.5 cm² . Finally, the total dose to a point measured with the scintillator was 0.51% higher compared to that calculated by the planning system.

CONCLUSION

The Blue Physics model 10 scintillation system showed excellent dosimetric characteristics. Its response independent of the temperature and the presence of a magnetic field make it suitable for in vivo dosimetry in an MR-Linac while acquiring MR images, which could solve the impossibility of performing a dosimetric QA for each adapted plan. Furthermore, its temporal resolution allows independent radiation pulses to be measured and visualized, which could be used in future applications.

Characterization of the Plastic Scintillator Detector System Exradin W2 in a High Dose Rate Flattening-Filter-Free Photon Beam

(1) Background: The Exradin W2 is a commercially available scintillator detector designed for reference and relative dosimetry in small fields. In this work, we investigated the performance of the W2 scintillator in a 10 MV flattening-filter-free photon beam and compared it to the performance of ion chambers designed for small field measurements. (2) Methods: We measured beam profiles and percent depth dose curves with each detector and investigated the linearity of each system based on dose per pulse (DPP) and pulse repetition frequency. (3) Results: We found excellent agreement between the W2 scintillator and the ion chambers for beam profiles and percent depth dose curves. Our results also showed that the two-voltage method of calculating the ion recombination correction factor was sufficient to correct for the ion recombination effect of ion chambers, even at the highest DPP. (4) Conclusions: These findings show that the W2 scintillator shows excellent agreement with ion chambers in high DPP conditions.