A method to reduce patient's eye lens dose in neuro-interventional radiology procedures

Assessment of Eye Lens Dose Reduction When Using Lateral Lead Shields on the Patient's Head during Neurointerventional Fluoroscopic Procedures and Cone-beam Computed Tomography (CBCT) Scans

The purpose of this study was to evaluate the effect of placing small lead shields on the temple region of the skull to reduce radiation dose to the lens of the eye during interventional fluoroscopically-guided procedures and cone-beam computed tomography (CBCT) scans of the head. EGSnrc Monte-Carlo code was used to determine the eye lens dose reduction when using lateral lead shields for single x-ray projections, CBCT scans with different protocols, and interventional neuroradiology procedures with the Zubal computational head phantom. A clinical C-Arm system was used to take radiographic projections and CBCT scans of anthropomorphic head phantoms without and with lead patches, and the images were compared to assess the effect of the shields. For single lateral projections, a 0.1 (0.3)-mm-thick lead patch reduced the dose to the left-eye lens by 40% to 60% (55% to 80%) from 45° to 90° RAO and to the right-eye lens by around 30% (55%) from 70° to 90° RAO. For different CBCT protocols, the reduction of lens dose with a 0.3-mm-thick lead patch ranged from 20% to 53% at 110 kVp. For CBCT scans of the anthropomorphic phantom, the lead patch introduced streak artifacts that were mainly in the orbital regions but were insignificant in the brain region where most neurointerventional activity occurs. The dose to the patient's eye lens can be reduced considerably by placing small lead shields over the temple region of the head without substantially compromising image quality in neuro-imaging procedures.

Radiation protection of operators and patients in a hybrid Angio-MR suite

This work investigates the patient eye lens dose and x-ray scatter to the operator expected for a proposed hybrid Angio-MR concept. Two geometries were simulated for comparative assessment: a standard C-arm device for neuro-angiography applications and an innovative hybrid Angio-MR system concept, proposed by Siemens Healthineers. The latter concept is based on an over-couch x-ray tube and a detector inside an MRI system, with the aim of allowing combined, simultaneous MRI and x-ray imaging for procedures such as neurovascular interventions (including x-ray fluoroscopy and angiography imaging, 3D imaging, diffusion, and perfusion). To calculate the scattered radiation dose to the physician, Monte Carlo simulations were performed. Dose estimates of simplified models of the brain and eyes of both the patient and the physician and of the physician's torso and legs have been calculated. A number of parameters were varied in the simulation including x-ray spectrum, field of view (FOV), x-ray tube angulation, presence of shielding material and position of the physician. Additionally, 3D dose distributions were calculated in the vertical and horizontal planes in both setups. The patient eye lens dose was also calculated using a detailed voxel phantom and measured by means of thermoluminescent dosimeters (TLDs) to obtain a more accurate estimate. Assuming the same number of x-rays and the same size of the irradiated area on the patient's head, the results show a significant decrease in the scattered radiation to the physician for the Angio-MR system, while large increases, depending on setup, are expected to patient eye lens dose.