Gamma photon and neutron attenuation properties of MgO–BaO–B2O3–TeO2–Cr2O3 glasses: The role of TeO2

A Monte Carlo simulation study on the evaluation of radiation protection properties of spectacle lens materials

The eye lens has been known a radiosensitive tissue. Radiation exposure can cause opacities, cataracts and vision loss. The sensitivity of the eyes to ionizing radiation has attracted attention in the last decade. ICRP announced that equivalent dose limit of eye lens has dropped in recent years. Therefore, spectacle lens selection is becoming increasingly important. In this study, the radiation protection properties of spectacle lens (CR-39, Polycarbonate and Trivex) materials were investigated using the MCNP-6.2 Monte Carlo code and SRIM software. The suitability of the results obtained with MCNP-6.2 Monte Carlo code was provided by comparing the theoretical results obtained from the WinXCOM program. The results showed that the CR-39 spectacle lens had minimum half-value layer, tenth value layer and mean free path values. In addition to the photon protection properties of spectacle lens materials, proton (H¹) and alpha (He⁺²) radiation protection properties were also investigated. Mass stopping power and projected range (PR) values for proton and alpha particles were calculated using SRIM code in the energy range of 0.01-10 MeV. As a result of the research, it was seen that the CR-39 lens had minimum PR values.

Multiple Assessments on the Gamma-Ray Protection Properties of Niobium-Doped Borotellurite Glasses: A Wide Range Investigation Using Monte Carlo Simulations

In this study, the monotonic effect of Ta2O5 and ZrO2 in some selected borotellurite glasses was investigated in terms of their impact on gamma-ray-shielding competencies. Accordingly, three niobium-reinforced borotellurite glasses (S1 : 75TeO2 + 15B2O3 + 10Nb2O5, S2 : 75TeO2 + 15B2O3 + 9Nb2O5 + 1Ta2O5, and S3 : 75TeO2 + 15B2O3 + 8Nb2O5 + 1Ta2O5 + 1ZrO2) were modelled in the general-purpose MCNPX Monte Carlo code. They have been defined as an attenuator sample between the point isotropic gamma-ray source and the detector in terms of determining their attenuation coefficients. To verify the MC results, attenuation coefficients were then compared with the Phy-X/PSD program data. Our findings clearly demonstrate that although some behavioral changes occurred in the shielding qualities, modest improvements occurred in the attenuation properties depending on the modifier variation and its magnitude. However, the replacement of 2% moles of Nb2O5 with 1% mole of Ta2O5 and 1% mole of ZrO2 provided significant improvements in both glass density and attenuation properties against gamma rays. Finally, the HVL values of the S3 sample were compared with some glass- and concrete-shielding materials and the S3 sample was reported for its outstanding properties. As a consequence of this investigation, it can be concluded that the indicated type of additive to be added to borotellurite glasses will provide some advantages, particularly when used in radiation fields, by increasing the shielding qualities moderately.

Comparison of ITO and ZnO ternary glassy composites in terms of radiation shielding properties by Monte Carlo N-particle transport code and BXCOM

In the present study, radiation shielding properties of two glassy composite materials that are widely used in electronics, photovoltaic applications, and sensor technology, were investigated in the photon energy range from 15 keV to 15 MeV. The materials chosen were (ITO)/V₂O₅/B₂O₃ and ZnO/V₂O₅/B₂O₃ including various concentrations of B₂O₃. Radiation interaction was simulated and shielding parameters calculated by means of the MCNP and BXCOM codes. More specifically, buildup factors, effective electron density ([Formula: see text]) and effective atomic number ([Formula: see text]) were calculated with BXCOM, while mass attenuation coefficients ([Formula: see text]), half-value layer (HVL) and tenth-value layer (TVL) values were calculated with MCNP. The results were compared with those obtained with the WinXCOM code, for validation. Acceptable and preferable results were obtained for both composites as alternative to other glassy shielding materials. The composite including ITO showed better shielding properties than the composite including ZnO. In terms of radiation shielding, both composites turned out to be better than concrete and close to lead.