Bone bonding augmentation and synergetic attitude of gamma-irradiated modified borate bioglass

Synthesis, structural, optical, and thermal properties of LaFeO3/Poly(methyl methacrylate)/Poly(vinyl acetate) nanocomposites for radiation shielding

This work is an attempt to develop flexible radiation shielding based on a blend of polymethyl methacrylate (PMMA)/polyvinyl acetate (PVAc) and LaFeO3 nanoparticles (NPs). LaFeO3 and LaFeO3/PMMA/PVAc were made using simple chemical techniques. A high-resolution transmission electron microscope (HR-TEM) and X-ray diffraction (XRD) showed that well-crystallized LaFeO3 NPs with particles 79 nm in size and an orthorhombic shape were obtained. In addition, XRD confirmed the existence of PMMA, PVAc, and LaFeO3 in the nanocomposite films. Fourier transform infrared (FTIR) confirmed that the LaFeO3 NPs and the reactive functional groups in the blend interacted with each other. Field emission-scan electron microscope (FE-SEM) analysis showed that PMMA and PVAc form a homogenous blend and that the LaFeO3 NPs were spread out inside and on the blend surface. The samples showed transmittance in the range of 30-74% and a small extinction coefficient (≤ 0.08). The samples exhibited a dual-band gap structure, and the direct (indirect) band gap shrank from 5.1 to 4.7 eV (4.9 to 4.4 eV). The thermal analyses showed that the samples are thermally stable up to 260 °C. The Phy-X/PSD software was used to figure out the theoretical gamma-ray attenuation parameters, such as the mass attenuation coefficient, the mean free path, and the half-value layer, for different PMMA/PVAc + x% LaFeO3 composites. It is demonstrated that the PMMA/PVAc + 10 wt% LaFeO3 sample exhibits much better shielding effectiveness than PMMA/PVAc, and hence it is suitable for protecting against radiation.

Inspection of Radiation Shielding Proficiency and Effect of Gamma-Ray on ESR and Thermal Characteristics of Copper Oxide Modified Borate Bioglasses

Samples of copper-modified bioactive borate glasses were synthesized and their radiation shielding properties including gamma-ray and neutron radiation shielding were investigated. Further, the glasses’ mass attenuation coefficients were measured with a NaI(Tl) detector while their gamma-ray shielding parameters were estimated using Phy-X/PSD program. Free-radical densities were measured via electron spin resonance to estimate the absorbed doses during accidental irradiation. The extensive reduction of the dose detection threshold (2 Gy) required the estimation of the signal of the non-irradiated sample. In addition, the effects of applied microwave power and absorbed dose on synthesized samples were studied. Finally, the thermal annealing of the emerging peaks, which were due to the irradiation signal-to-noise ratio and energy dependence, was studied to estimate the stabilities of such peaks. This modified material is recommended to detect and monitor the gamma-radiation dose because of its good dosimetric properties. Finally, regarding the presence of the two borate groups, triangular and the tetrahedrally coordinated, in their definite and typical wavenumbers, the FTIR spectra displayed simplified vibrations that were close to those of many bioglasses. This paper provides complementary results for the author's previous research examining this glass for low photon dose measurements using luminescence characteristics.