A tilting embryo culture system increases the number of high-grade human blastocysts with high implantation competence

In Vitro Culture of Mammalian Embryos: Is There Room for Improvement?

Preimplantation embryo culture, pivotal in assisted reproductive technology (ART), has lagged in innovation compared to embryo selection advancements. This review examines the persisting gap between in vivo and in vitro embryo development, emphasizing the need for improved culture conditions. While in humans this gap is hardly estimated, animal models, particularly bovines, reveal clear disparities in developmental competence, cryotolerance, pregnancy and live birth rates between in vitro-produced (IVP) and in vivo-derived (IVD) embryos. Molecular analyses unveil distinct differences in morphology, metabolism, and genomic stability, underscoring the need for refining culture conditions for better ART outcomes. To this end, a deeper comprehension of oviduct physiology and embryo transport is crucial for grasping embryo-maternal interactions' mechanisms. Research on autocrine and paracrine factors, and extracellular vesicles in embryo-maternal tract interactions, elucidates vital communication networks for successful implantation and pregnancy. In vitro, confinement, and embryo density are key factors to boost embryo development. Advanced dynamic culture systems mimicking fluid mechanical stimulation in the oviduct, through vibration, tilting, and microfluidic methods, and the use of innovative softer substrates, hold promise for optimizing in vitro embryo development.

Micro-vibration results in vitro-derived bovine blastocysts with greater cryotolerance, epigenetic abnormalities, and a massive transcriptional change

Much effort has been employed to improve the quality of embryos obtained by in vitro production (IVP) given the relevance of this technology to current livestock systems. In this context, dynamic IVP systems have proved beneficial to the embryo once they mimic fluid flows and mechanical forces resulting from the movement of ciliated cells and muscle contraction in the reproductive tract. In the present study, we sought to confirm these initial findings as well as assess potential molecular consequences to the embryo by applying micro-vibration (45 Hz for 5 s once per 60 min) during both oocyte maturation and embryo culture in cattle. As a result, micro-vibration led to lower incidence of apoptosis in blastocysts following vitrification-thawing. Further analyses revealed epigenetic and transcriptional changes in blastocysts derived from the micro-vibration treatment, with a total of 502 differentially expressed genes. Enrichment analyses linked differentially expressed genes to 'Oxidative phosphorylation', 'Cytokine-cytokine receptor interaction', and 'Signaling pathways regulating pluripotency of stem cells'. Yet, a meta-analysis indicated that the transcriptional changes induced by micro-vibration were not toward that of in vivo-derived embryos. In conclusion, micro-vibration increases the cryoresistance of bovine embryos, but caution should be taken given the unclear consequences of epigenetic and transcriptional abnormalities induced by the treatment.

Surface functionalization of poly(dimethylsiloxane) substrates facilitates culture of pre-implantation mouse embryos by blocking non-selective adsorption

Poly(dimethylsiloxane) (PDMS) is widely used in biomedical settings such as microfluidics for its optical transparency, castability, gas permeability and relative biocompatibility. While PDMS devices with certain modifications or treatments have been used for mammalian pre-implantation embryo culture, it is unclear why native PDMS leads to significant embryo death. In this study, we employ Nile Red as a model hydrophobic small molecule to demonstrate that significant hydrophobic sequestration occurs on native PDMS substrates even with a bovine serum albumin-containing KSOM pre-equilibration. Our results suggest that this small molecule sequestration has detrimental effects on mouse embryo development in PDMS static culture wells, with 0% blastocyst development rates from embryos cultured on native PDMS. We found that prior saturation of the PDMS culture well with water vapour only rescues about 10% of blastocyst development rates, indicating osmolality alone is not responsible for the high rates of embryo arrest. We also present a safe and simple Pluronic F127 pretreatment for PDMS substrates that successfully circumvented the harmful effects of native PDMS, achieving a blastocyst and implantation rate akin to that of our polystyrene controls. Our results call into question how researchers and clinicians can account for the alterations in medium composition and embryo secretions when using hydrophobic substrates, especially in the mammalian embryo culture setting where minimum effective concentrations of peptides and amino acids are commonplace.

Mechanobiology of the female reproductive system

BACKGROUND

Mechanobiology in the field of human female reproduction has been extremely challenging technically and ethically.

METHODS

The present review provides the current knowledge on mechanobiology of the female reproductive system. This review focuses on the early phases of reproduction from oocyte development to early embryonic development, with an emphasis on current progress.

MAIN FINDINGS RESULTS

Optimal, well-controlled mechanical cues are required for female reproductive system physiology. Many important questions remain unanswered; whether and how mechanical imbalances among the embryo, decidua, and uterine muscle contractions affect early human embryonic development, whether the biomechanical properties of oocytes/embryos are potential biomarkers for selecting high-quality oocytes/embryos, whether mechanical properties differ between the two major compartments of the ovary (cortex and medulla) in normally ovulating human ovaries, whether durotaxis is involved in several processes in addition to embryonic development. Progress in mechanobiology is dependent on development of technologies that enable precise physical measurements.

CONCLUSION

More studies are needed to understand the roles of forces and changes in the mechanical properties of female reproductive system physiology. Recent and future technological advancements in mechanobiology research will help us understand the role of mechanical forces in female reproductive system disorders/diseases.

Biophysical optimization of preimplantation embryo culture: what mechanics can offer ART

Owing to the rise of ART and mounting reports of epigenetic modification associated with them, an understanding of optimal embryo culture conditions and reliable indicators of embryo quality are highly sought after. There is a growing body of evidence that mechanical biomarkers can rival embryo morphology as an early indicator of developmental potential and that biomimetic mechanical cues can promote healthy development in preimplantation embryos. This review will summarize studies that investigate the role of mechanics as both indicators and promoters of mammalian preimplantation embryo development and evaluate their potential for improving future embryo culture systems.

MECHANOMEDICINE: applications of mechanobiology to medical sciences and next-generation medical technologies

Mechanical stress underlies most aspects of cell and organismal biology. Mechanomedicine is a field of biology that seeks to understand molecular, cellular, tissue, organ, and individual responses to mechanical stimuli and aims to apply the gained knowledge to improve health. Combining biology and engineering, we explore research areas including mechanosensitive ion channels, heart failure, and regenerative medicine.This review will describe our findings in mechanobiology, our establishment of a joint venture business as we developed devices responding to medical needs, and our alliance with other companies.

Improvement of embryonic development and clinical outcomes of germinal vesicle stage oocytes using a microvibration culture system

In vitro maturation (IVM) has evolved as a clinical treatment option in assisted reproductive technology. However, the poor developmental potential of germinal vesicle (GV)-stage oocytes is still suboptimal. This study's objective was to evaluate the effect of a microvibration culture system (MVC) during IVM and/or in vitro culture (IVC) on the clinical outcomes and the embryonic development potential of human GV-stage oocytes collected from human chorionic gonadotropin (HCG)-primed IVM and fertilization-embryo transfer (IVM/F-ET) cycles of patients with polycystic ovaries (PCO). A total of 206 HCG-primed IVM/F-ET cycles were divided into four groups according to the microvibration and static culture system applied during IVM and/or IVC: Group SS (static system during both IVM and IVC); Group SV (static system during IVM alternated with microvibration system during IVC); Group VS (microvibration system during IVM alternated with static system during IVC), and Group VV (microvibration system during both IVM and IVC). The results indicate that the rates of in vitro MII oocytes per cycle, fertilization, and cleavage were not significantly different between the groups. The rate of good-quality embryos in Group SV tended to be higher than the rate in Groups SS and VS, but there was no significant difference between Group SS and Group SV. Clinical pregnancy, implantation, and live birth rates of Groups SV and VS were slightly higher than those of Group SS. However, the rate of good-quality embryos with at least six cells on day 4, the clinical pregnancy, implantation, and live births in Group VV were significantly higher than those in Group SS. These results indicate that, compared with the static culture system, the MVC system applied for both IVM and IVC seems to improve the clinical outcomes and the quality of embryos of GV oocytes derived from HCG-primed IVM/F-ET cycles in PCO patients. Abbreviations: PCO: polycystic ovaries; HCG: human chorionic gonadotropin; GV: germinal vesicle; MII: metaphase II; IVM: in vitro maturation; IVF: in vitro fertilization; IVC: in vitro culture: MVC: microvibration culture; SC: static culture; ICSI: intracytoplasmic sperm injection; IVM/F-ET: IVM and fertilization-embryo transfer; AMH: anti-Mullerian hormone; OHSS: ovarian hyperstimulation syndrome.

Mechanomedicine

It has been a long time since the term mechanobiology became widely accepted, and broad research approaches, ranging from basic biology to medical research, have been conducted from the perspective of mechanobiology. Our group created the term “mechanomedicine” focusing on the field encompassing studies of the pathology and treatment of various diseases based on the knowledge obtained from mechanobiological studies and have promoted studies in this field. In the respiratory and cardiovascular systems, not only humoral factors but also physical factors such as contraction and expansion phenomena, and feedback from such phenomena to tissues and cells are important stimuli for maintaining homeostasis. Loss of homeostasis is considered to lead to pathological conditions. This review aims to provide an overview of mechanomedicine by introducing several mechanosensitive channels including one particular type of mechanosensor that we discovered in the cardiovascular system and by describing stretchable three-dimensional cell culture scaffolds using self-assembled peptides, a highly motile sperm sorter using a sperm sorting technique based on microfluidic mechanics, and a device to promote the development of fertilized ova.

Microfluidic analysis of oocyte and embryo biomechanical properties to improve outcomes in assisted reproductive technologies

Measurement of oocyte and embryo biomechanical properties has recently emerged as an exciting new approach to obtain a quantitative, objective estimate of developmental potential. However, many traditional methods for probing cell mechanical properties are time consuming, labor intensive and require expensive equipment. Microfluidic technology is currently making its way into many aspects of assisted reproductive technologies (ART), and is particularly well suited to measure embryo biomechanics due to the potential for robust, automated single-cell analysis at a low cost. This review will highlight microfluidic approaches to measure oocyte and embryo mechanics along with their ability to predict developmental potential and find practical application in the clinic. Although these new devices must be extensively validated before they can be integrated into the existing clinical workflow, they could eventually be used to constantly monitor oocyte and embryo developmental progress and enable more optimal decision making in ART.

Optimizing the culture environment and embryo manipulation to help maintain embryo developmental potential

With increased use of comprehensive chromosome screening (CCS), the question remains as to why some practices do not experience the same high levels of clinical success after implementation of the approach. Indeed, the debate surrounding the efficacy and usefulness of blastocyst biopsy and CCS continues. Importantly, several variables impact the success of an assisted reproductive technology cycle. Transfer of a euploid embryo is but one factor in an intricate system that requires numerous steps to occur successfully. Certainly, the culture environment and the manipulations of the embryo during its time in the laboratory can impact its reproductive potential. Environmental stressors ranging from culture media to culture conditions and even culture platform can impact biochemical, metabolic, and epigenetic patterns that can affect the developing cell independent of chromosome number. Furthermore, accompanying procedures, such as biopsy and vitrification, are complex and, when performed improperly, can negatively impact embryo quality. These are areas that likely still carry room for improvement within the IVF laboratory.

ACE consensus meeting report: culture systems

The UK Association of Clinical Embryologists held a workshop on Culture Systems for assisted conception in Sheffield on 22 May 2013. The meeting was organised in the light of the availability of numerous commercial products for the culture of human preimplantation embryos in vitro and the absence of data comparing the performance of these products. Expert opinions were presented, along with survey data provided by participating IVF Centres. The workshop highlighted the lack of a sound evidence base to support the selection of any one commercial product over another, and raised concerns over the lack of information defining precisely the composition of media, and the potential for adverse long-term effects of such products following their use in assisted conception.

Mouse embryo motion and embryonic development from the 2-cell to blastocyst stage using mechanical vibration systems

We investigated the effect of mechanical stimuli on mouse embryonic development from the 2-cell to blastocyst stage to evaluate physical factors affecting embryonic development. Shear stress (SS) applied to embryos using two mechanical vibration systems (MVSs) was calculated by observing microscopic images of moving embryos during mechanical vibration (MV). The MVSs did not induce any motion of the medium and the diffusion rate using MVSs was the same as that under static conditions. Three days of culture using MVS did not improve embryonic development. MVS transmitted MV power more efficiently to embryos than other systems and resulted in a significant decrease in development to the morula or blastocyst stage after 2 days. Comparison of the results of embryo culture using dynamic culture systems demonstrated that macroscopic diffusion of secreted materials contributes to improved development of mouse embryos to the blastocyst stage. These results also suggest that the threshold of SS and MV to induce negative effects for mouse embryos at stages earlier than the blastocyst may be lower than that for the blastocyst, and that mouse embryos are more sensitive to physical and chemical stimuli than human or pig embryos because of their thinner zona pellucida.