Binding of antibodies to concanavalin A-modified monolithic cryogel

Antigen-Mimic Nanoparticles in Ultrasensitive on-Chip Integrated Anti-p53 Antibody Quantification

As a tumor-suppressing protein, p53 plays a crucial role in preventing cancer development. Its utility as an early cancer detection tool is significant, potentially enabling clinicians to forestall disease advancement and improve patient prognosis. In response to the pathological overexpression of this antigen in tumors, the prevalence of anti-p53 antibodies increases in serum, in a manner quantitatively indicative of cancer progression. This spike can be detected through techniques, such as Western blotting, immunohistochemistry, and immunoprecipitation. In this study, we present an electrochemical approach that supports ultrasensitive and highly selective anti-p53 autoantibody quantification without the use of an immuno-modified electrode. We specifically employ antigen-mimicking and antibody-capturing peptide-coated magnetic nanoparticles, along with an AC magnetic field-promoted sample mixing, prior to the presentation of Fab-captured targets to simple lectin-modified sensors. The subfemtomolar assays are highly selective and support quantification from serum-spiked samples within minutes.

Adsorption behavior of serum proteins on anodized titanium is driven by surface nanomorphology

Protein adsorption behavior can play a critical role in defining the outcome of a material by affecting the subsequent in vivo response to it. To date, the effect of surface properties on protein adsorption behavior has been mainly focused on surface chemistry, but research on the effect of nanoscale surface topography remains limited. In this study, the adsorption behavior of human serum albumin, immunoglobulin G, and fibrinogen in terms of the adsorbed amount and conformational changes were investigated on bare and anodized titanium (Ti) samples (40 and 60 V applied voltages). While the surface chemistry, RMS surface roughness, and arithmetic surface roughness of the anodized samples were similar, they had distinctly different nanomorphologies identified by atomic force microscopy and scanning electron microscopy, and the surface statistical parameters, surface skewness Ssk and kurtosis Sku. The Feret pore size distribution was more uniform on the 60 V sample, and surface nanostructures were more symmetrical with higher peaks and deeper pores. On the other hand, the 40 V sample surface presented a nonuniform pore size distribution and asymmetrical surface nanostructures with lower peaks and shallower pores. The amount of surface-adsorbed protein increased on the sample surfaces in the order of Ti < 40 V < 60 V with the predominant factor affecting the amount of surface-adsorbed protein being the increased surface area attained by pore formation. The secondary structure of all adsorbed proteins deviated from that of their native counterparts. While comparing the secondary structure components of proteins on anodized surfaces, it was observed that all three proteins retained more of their secondary structure composition on the surface with more uniform and symmetrical nanofeatures than the surface having asymmetrical nanostructures. Our results suggest that the nanomorphology of the peaks and outer walls of the nanotubes can significantly influence the conformation of adsorbed serum proteins, even for surfaces having similar roughness values.

Evaluation of reproducible cryogel preparation based on automated image analysis using deep learning

Cryogels represent a class of porous sponge-like materials possessing unique properties including high-fidelity reproduction of tissue structure and maximized permeability. Their architecture is mainly based on an interconnected network of macropores that provides sufficient stability while allowing the movement of substances through the material. In most cryogel applications, the pore size is very important, especially when the material is used as a 3D scaffold for tissue culture, applied as a filter, or utilized as a membrane. In this study, poly(dimethylacrylamide-co-2-hydroxyethyl methacrylate) cryogels have been prepared by two preparation methods to investigate the reproducibility of homogeneous pore structures and pore sizes. Automated image analysis algorithms were developed to rapidly evaluate cryogel pore sizes based on scanning electron microscopy (SEM) images. The quantification approach contained a unique combination of classical and deep learning-based algorithms. To validate the accuracy of the two models, we compared the results obtained from automated SEM image analysis with those from manual pore size determinations and mercury intrusion porosimetry (MIP) measurements. Effect sizes were calculated to compare the results from manual and automated pore size measurements for the cryogel reproducibility series. 81% of the values obtained revealed only trivial differences, which strongly suggests that automated image analysis can reliably substitute the manual evaluation of cryogel pore sizes. The use of an adapted reactor setup yielded cryogels with heterogeneous morphologies in the absence of recognizable pore structures. With the conventional cryogel preparation using plastic syringes, the obtained cryogels represented highly reproducible morphologies and pore sizes in the range between 17 and 22 μm. Calculated effect sizes within the cryogel replicate series revealed only trivial differences between the obtained pore sizes in 83.5% or 99.4% of the data (classical approach and deep learning-based approach, respectively).

Application of lectin immobilized on polyHIPE monoliths for bioprocess monitoring of glycosylated proteins

In-process monitoring of glycosylated protein concentration becomes very important with the introduction of perfusion bioprocesses. Affinity chromatography based on lectins allows selective monitoring when carbohydrates are accessible on the protein surface. In this work, we immobilized lectin on polyHIPE type of monoliths and implemented it for bioprocess monitoring. A spacer was introduced to lectin, which increased binding kinetics toward Fc-fusion protein, demonstrated by bio-layer interferometry. Furthermore, complete desorption using 0.25 M galactose was shown. Affinity column exhibited linearity in the range between 0.5 and 8 mg/ml and flow-unaffected binding for the flow-rates between 0.5 and 8 ml/min. Long-term stability over at least four months period was demonstrated. No unspecific binding of culture media components, including host cell proteins and DNA, was detected. Results obtained by affinity column matched concentration values obtained by a reference method.

Supermacroporous Composite Cryogels in Biomedical Applications

Supermacroporous gels, called cryogels, are unique scaffolds that can be prepared by polymerization of monomer solution under sub-zero temperatures. They are widely used in many applications and have significant potential biomaterials, especially for biomedical applications due to their inherent interconnected supermacroporous structures and easy formation of composite polymers in comparison to other porous polymer synthesis techniques. This review highlights the fundamentals of supermacroporous cryogels and composite cryogels, and then comprehensively summarizes recent studies in preparation, functionalization, and utilization with mechanical, biological and physicochemical features, according to the biomedical applications. Furthermore, conclusions and outlooks are discussed for the use of these promising and durable supermacroporous composite cryogels.

Biomedical Applications of Polymeric Cryogels

The application of interconnected supermacroporous cryogels as support matrices for the purification, separation and immobilization of whole cells and different biological macromolecules has been well reported in literature. Cryogels have advantages over traditional gel carriers in the field of biochromatography and related biomedical applications. These matrices nearly mimic the three-dimensional structure of native tissue extracellular matrix. In addition, mechanical, osmotic and chemical stability of cryogels make them attractive polymeric materials for the construction of scaffolds in tissue engineering applications and in vitro cell culture, separation materials for many different processes such as immobilization of biomolecules, capturing of target molecules, and controlled drug delivery. The low mass transfer resistance of cryogel matrices makes them useful in chromatographic applications with the immobilization of different affinity ligands to these materials. Cryogels have been introduced as gel matrices prepared using partially frozen monomer or polymer solutions at temperature below zero. These materials can be produced with different shapes and are of interest in the therapeutic area. This review highlights the recent advances in cryogelation technologies by emphasizing their biomedical applications to supply an overview of their rising stars day to day.

A new support material for IgG adsorption: Syntrichia papillosissima (Copp.) Loeske

In this presented work, Syntrichia papillosissima (Copp.) Loeske (S. papillosissima) was used as a natural phytosorbent for IgG purification. These moss species were collected for the natural habitat and prepared for IgG adsorption studies by cleaning, drying, and grinding to uniform size. Syntrichia papillosissima samples were characterized by using FTIR and SEM studies. Functional groups of S. papillosissima were identified by FTIR analysis, while surface characteristics were determined by SEM studies. A batch system was used for the adsorption of IgG onto S. papillosissima surface and physical conditions of the IgG adsorption medium were investigated by modifying the pH, IgG concentration and temperature. Maximum IgG adsorption onto S. papillosissima was found to be 68.01 mg/g moss by using pH 5.0 buffer system. Adsorption kinetic isotherms were also studied and it was found that, Langmuir adsorption model was appropriate for this adsorption study. Reusability profile of S. papillosissima was also investigated and IgG adsorption capacity did not decrease significantly after 5 reuse studies. Results indicated that S. papillosissima species have the capacity to be used as biosorbent for IgG purification, with its low cost, natural and biodegradable structure.

Application of Porous Materials to Carbohydrate Chemistry and Glycoscience

There is a growing interest in using a range of porous materials to meet research needs in carbohydrate chemistry and glycoscience in general. Among the applications of porous materials reviewed in this chapter, enrichment of glycans from biological samples prior to separation and analysis by mass spectrometry is a major emphasis. Porous materials offer high surface area, adjustable pore sizes, and tunable surface chemistry for interacting with glycans, by boronate affinity, hydrophilic interactions, molecular imprinting, and polar interactions. Among the materials covered in this review are mesoporous silica and related materials, porous graphitic carbon, mesoporous carbon, porous polymers, and nanoporous gold. In some applications, glycans are enzymatically or chemically released from glycoproteins or glycopeptides, and the porous materials have the advantage of size selectivity admitting only the glycans into the pores and excluding proteins. Immobilization of lectins onto porous materials of suitable pore size allows for the use of lectin-carbohydrate interactions in capture or separation of glycoproteins. Porous material surfaces modified with carbohydrates can be used for the selective capture of lectins. Controlled release of therapeutics from porous materials mediated by glycans has been reported, and so has therapeutic targeting using carbohydrate-modified porous particles. Additional applications of porous materials in glycoscience include their use in the supported synthesis of oligosaccharides and in the development of biosensors for glycans.

Molecularly imprinted composite cryogels for hemoglobin depletion from human blood

A molecularly imprinted composite cryogel (MICC) was prepared for depletion of hemoglobin from human blood prior to use in proteome applications. Poly(hydroxyethyl methacrylate) based MICC was prepared with high gel fraction yields up to 90%, and characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, swelling studies, flow dynamics and surface area measurements. MICC exhibited a high binding capacity and selectivity for hemoglobin in the presence of immunoglobulin G, albumin and myoglobin. MICC column was successfully applied in fast protein liquid chromatography system for selective depletion of hemoglobin for human blood. The depletion ratio was highly increased by embedding microspheres into the cryogel (93.2%). Finally, MICC can be reused many times with no apparent decrease in hemoglobin adsorption capacity.

Membrane adsorbers comprising grafted glycopolymers for targeted lectin binding

This work details the design and testing of affinity membrane adsorbers for lectin purifications that incorporate glucose-containing glycopolymers. It is the selective interaction between the sugar residues of the glycopolymer and the complementary carbohydrate-binding domain of the lectin that provides the basis for the isolation and purification of lectins from complex biological media. The design approach used in these studies was to graft glycopolymer 'tentacles' from macroporous regenerated cellulose membranes by atom transfer radical polymerization. As shown in earlier studies, this design approach can be used to prepare high-productivity membrane adsorbers. The model lectin, concanavalin A (conA), was used to evaluate membrane performance in bind-and-elute purification, using a low molecular weight sugar for elution. The membrane capacity for binding conA was measured at equilibrium and under dynamic conditions using flow rates of 0.1 and 1.0 mL/min. The first Damkohler number was estimated to relate the adsorption rate to the convective mass transport rate through the membrane bed. It was used to assess whether adsorption kinetics or mass transport contributed the primary limitation to conA binding. Analyses indicate that this system is not limited by the accessibility of the binding sites, but by the inherent rate of adsorption of conA onto the glycopolymer.

Square-wave voltammetry assays for glycoproteins on nanoporous gold

Electrochemical enzyme-linked lectinsorbent assays (ELLA) were developed using nanoporous gold (NPG) as a solid support for protein immobilization and as an electrode for the electrochemical determination of the product of the reaction between alkaline phosphatase (ALP) and p-aminophenyl phosphate (p-APP), which is p-aminophenol (p-AP). Glycoproteins or concanavalin A (Con A) and ALP conjugates were covalently immobilized onto lipoic acid self-assembled monolayers on NPG. The binding of Con A - ALP (or soybean agglutinin - ALP) conjugate to glycoproteins covalently immobilized on NPG and subsequent incubation with p-APP substrate was found to result in square-wave voltammograms whose peak difference current varied with the identity of the glycoprotein. NPG presenting covalently bound glycoproteins was used as the basis for a competitive electrochemical assay for glycoproteins in solution (transferrin and IgG). A kinetic ELLA based on steric hindrance of the enzyme-substrate reaction and hence reduced enzymatic reaction rate after glycoprotein binding is demonstrated using immobilized Con A-ALP conjugates. Using the immobilized Con A-ALP conjugate, the binding affinity of immunoglobulin G (IgG) was found to be 105 nM, and that for transferrin was found to be 650 nM. Minimal interference was observed in the presence of 5 mg mL-1 BSA as a model serum protein in both the kinetic and competitive ELLA. Inhibition studies were performed with methyl D-mannoside for the binding of TSF and IgG to Con A-ALP; IC50 values were found to be 90 μM and 286 μM, respectively. Surface coverages of proteins were estimated using solution depletion and the BCA protein concentration assay.

Affinity-recognition-based polymeric cryogels for protein depletion studies

Supermacroporous cryogels can be used for the depletion of highly abundant proteins prior to proteome investigations.

Lectin-carbohydrate interactions on nanoporous gold monoliths

Monoliths of nanoporous gold (np-Au) were modified with self-assembled monolayers of octadecanethiol (C18-SH), 8-mercaptooctyl α-D-mannopyranoside (αMan-C8-SH), and 8-mercapto-3,6-dioxaoctanol (HO-PEG2-SH), and the loading was assessed using thermogravimetric analysis (TGA). Modification with mixed SAMs containing αMan-C8-SH (at a 0.20 mole fraction in the SAM forming solution) with either octanethiol or HO-PEG2-SH was also investigated. The np-Au monoliths modified with αMan-C8-SH bind the lectin Concanavalin A (Con A), and the additional mass due to bound protein was assessed using TGA analysis. A comparison of TGA traces measured before and after exposure of HO-PEG2-SH modified np-Au to Con A showed that the non-specific binding of Con A was minimal. In contrast, np-Au modified with octanethiol showed a significant mass loss due to non-specifically adsorbed Con A. A significant mass loss was also attributed to binding of Con A to bare np-Au monoliths. TGA revealed a mass loss due to the binding of Con A to np-Au monoliths modified with pure αMan-C8-SH. The use of mass losses determined by TGA to compare the binding of Con A to np-Au monoliths modified by mixed SAMs of αMan-C8-SH and either octanethiol or HO-PEG2-SH revealed that binding to mixed SAM modified surfaces is specific for the mixed SAMs with HO-PEG2-SH but shows a significant contribution from non-specific adsorption for the mixed SAMs with octanethiol. Minimal adsorption of immunoglobulin G (IgG) and peanut agglutinin (PNA) towards the mannoside modified np-Au monoliths was demonstrated. A greater mass loss was found for Con A bound onto the monolith than for either IgG or PNA, signifying that the mannose presenting SAMs in np-Au retain selectivity for Con A. TGA data also provide evidence that Con A bound to the αMan-C8-SH modified np-Au can be eluted by flowing a solution of methyl α-D-mannopyranoside through the structure. The presence of Con A proteins on the modified np-Au surface was also confirmed using atomic force microscopy (AFM). The results highlight the potential for application of carbohydrate modified np-Au monoliths to glycoscience and glycotechnology and demonstrate that they can be used for capture and release of carbohydrate binding proteins in significant quantities.

Immobilization of inulinase on concanavalin A-attached super macroporous cryogel for production of high-fructose syrup

In this study, concanavalin A (Con A)-attached poly(ethylene glycol dimethacrylate) [poly(EGDMA)] cryogels were used for immobilization of Aspergillus niger inulinase. For this purposes, the monolithic cryogel column was prepared by radical cryocopolymerization of EGDMA as a monomer and N,N'-methylene bisacrylamide as a crosslinker. Then, Con A was attached by covalent binding onto amino-activated poly(EGDMA) cryogel via glutaraldehyde activation. Characterization of cryogels was performed by FTIR, EDX, and SEM studies. Poly(EGDMA) cryogels were highly porous and pore size was found to be approximately 50-100 μm. Con A-attached poly(EGDMA) cryogels was used in the adsorption of inulinase from aqueous solutions. Adsorption of inulinase on the Con A-attached poly(EGDMA) cryogel was performed in continuous system and the effects of pH, inulinase concentration, and flow rate on adsorption were investigated. The maximum amount of inulinase adsorption was calculated to be 27.85 mg/g cryogel at 1.0 mg/mL inulinase concentration and in acetate buffer at pH 4.0. Immobilized inulinase was effectively used in continuous preparation of high-fructose syrup. Inulin was converted to fructose in a continuous system and released fructose concentration was found to be 0.23 mg/mL at the end of 5 min of hydrolysis. High-fructose content of the syrup was demonstrated by thin layer chromatography.

Disposable polymeric cryogel bioreactor matrix for therapeutic protein production

Low cost and high efficiency make disposable bioreactors feasible for small-scale therapeutic development and initial clinical trials. We have developed a cryogel-based disposable bioreactor matrix, which has been used for production of protein therapeutics such as urokinase and monoclonal antibodies (mAbs). The protocol discusses the application of a cryogel bioreactor for mAb production. Cryogels composed of either polyacrylamide (PAAm) coupled to gelatin or semi-interpenetrating PAAm-chitosan are synthesized by free-radical polymerization at -12 °C. Hybridoma cells are immobilized over the cryogel bioreactor and incubated for 48 h. Medium is circulated thereafter at 0.2 ml min(-1) and bioreactors can be run continuously for 60 d. The cryogel-based packed-bed bioreactor can be formulated as a monolith or as beads; it also has an efficiency four times what can be obtained using a tissue-culture flask, a high surface-to-volume ratio and effective nutrient transport. After incubation, the bioreactor setup will take about 60 min using a pre-prepared sterilized cryogel.

Oriented immobilized anti-hIgG via F(c) fragment-imprinted PHEMA cryogel for IgG purification

Antibodies are used in many applications, especially as diagnostic and therapeutic agents. Among the various techniques used for the purification of antibodies, immunoaffinity chromatography is by far the most common. For this purpose, oriented immobilization of antibodies is an important step for the efficiency of purification step. In this study, F(c) fragment-imprinted poly(hydroxyethyl methacrylate) cryogel (MIP) was prepared for the oriented immobilization of anti-hIgG for IgG purification from human plasma. Non-imprinted poly(hydroxyethyl methacrylate) cryogel (NIP) was also prepared for random immobilization of anti-hIgG to compare the adsorption capacities of oriented (MIP/anti-hIgG) and random (NIP/anti-hIgG) cryogel columns. The amount of immobilized anti-hIgG was 19.8 mg/g for the NIP column and 23.7 mg/g for the MIP column. Although the amount of immobilized anti-hIgG was almost the same for the NIP and MIP columns, IgG adsorption capacity was found to be three times higher than the NIP/anti-hIgG column (29.7 mg/g) for the MIP/anti-hIgG column (86.9 mg/g). Higher IgG adsorption capacity was observed from human plasma (up to 106.4 mg/g) with the MIP/anti-hIgG cryogel column. Adsorbed IgG was eluted using 1.0 M NaCl with a purity of 96.7%. The results obtained here are very encouraging and showed the usability of MIP/anti-hIgG cryogel prepared via imprinting of Fc fragments as an alternative to conventional immunoaffinity techniques for IgG purification.